开云体育

DigiRig, flrig, and a Yaesu FT-747GX

Glenn Jensen, WA6BJQ All Messages By This Member #53620 开云体育 Fair enough. I could not get the repo download (of flrig) working.? But to test connectivity, I tried JTDX with my FTdx10 (not Flrig/Flrig - worked just fine, even though flrig did not (as a standalone).? My next step was to compile and install flrig (from source - also fldigi), rebooted, and this seemed to be my solution on the Pi. JTDX actually confirmed connectivity / CAT operations.? Using the GUI and command line audio mixers, I was able to access and test each audio subsystem (I have three ham rigs, and a commercial mixer .. on USB ports).? Ringing out new installations. These things can be frustrating - you will get it. 73, Glenn On 11/16/24 06:51, Riley Gossling, KF0QMQ via groups.io wrote: toggle quoted message Show quoted text Thanks for the reply. Yes, I am part of the dialout group. I did the chmod command also and no change. I don't believe it's a permission issue since I have this same setup working with other programs.
Riley Gossling, KF0QMQ All Messages By This Member #53621 Yeah the strangest thing is that I have cat control through JS8Call and WSJT-X working fine?
Riley Gossling, KF0QMQ All Messages By This Member #53647 Alright I've tried installing the latest flrig software on both tiny10 (a stripped-down version of windows 10) and actual windows 11 and I get the same errors. ? This leads me to believe the issue is with my Digirig setup, but I know others have used their digirig with flrig and I don't have any issues with WSJT-X or JS8Call. ? Any other ideas?
Riley Gossling, KF0QMQ All Messages By This Member #53648 A note, the tiny10 installation was on the same computer I had been trying to get working with linux, the windows 11 installation was a different computer.
Riley Gossling, KF0QMQ All Messages By This Member #53650 I believe so, but I can try messing with them again.? ? I'm using a Digirig with homemade cables. ? ? https://forum.digirig.net/t/cable-for-yaesu-ft-747/4282
Riley Gossling, KF0QMQ All Messages By This Member #53653 I have not tried that. I would like to exhaust all other options before opening it up and modifying it, since the logic levels selection works fine with other software.
N5VMO Pat All Messages By This Member #53654 Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =) toggle quoted message Show quoted text RS-232 configuration in Digirig 1.9 -- 73's Pat? N5VMO
Riley Gossling, KF0QMQ All Messages By This Member #53655 Can you explain what that means please? toggle quoted message Show quoted text On Tue, Nov 19, 2024, 7:21?AM N5VMO Pat via <n5vmo00=[email protected]> wrote: Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =) RS-232 configuration in Digirig 1.9 -- 73's Pat? N5VMO
Dave, W1HKJ All Messages By This Member #53656 开云体育 ?Turn off all other serial access to the transceiver/digirig before starting and configuraing flrig.? Suggest rebooting the computer before starting flrig. reboot computer turn on transceiver start flrig configure flrig start WSJT-X and set up to use "flrig" as the transceiver interface start JS8Call and configure similar to WSJT-X The will allow fldigi, JS8Call, and WSJT-X to operate simultaneously, all with transceiver control via flrig. 73, David, W1HKJ On 11/16/24 09:13, Riley Gossling, KF0QMQ via groups.io wrote: toggle quoted message Show quoted text Yeah the strangest thing is that I have cat control through JS8Call and WSJT-X working fine?
Riley Gossling, KF0QMQ All Messages By This Member #53662 I still have not gotten FLRig to communicate with my radio toggle quoted message Show quoted text On Tue, Nov 19, 2024, 8:42?AM Dave, W1HKJ via <w1hkj=[email protected]> wrote: ?Turn off all other serial access to the transceiver/digirig before starting and configuraing flrig.? Suggest rebooting the computer before starting flrig. reboot computer turn on transceiver start flrig configure flrig start WSJT-X and set up to use "flrig" as the transceiver interface start JS8Call and configure similar to WSJT-X The will allow fldigi, JS8Call, and WSJT-X to operate simultaneously, all with transceiver control via flrig. 73, David, W1HKJ On 11/16/24 09:13, Riley Gossling, KF0QMQ via wrote: Yeah the strangest thing is that I have cat control through JS8Call and WSJT-X working fine?

Previous Topic Next Topic