¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Linuxham
  2. Topics

DE19 + Quadra + WSJTX = PROBLEMS

KN6ZVI <<Al McManus>>
 

?
I have tried several ways to get my G90 using the DE 19 box to do WSJTX/FT8? with my Inovato Quadra a Linux machine and I all I is the radio locked on transmit and nothing else. I presume it is because I cannot find the right port on flrig using the G90 config in the drop down box. I confess to an almost complete ignorance of Linux and the Armbian version that the Quadra runs, so I don't really know how to chose the correct audio in and audio out ports and I believe that is my problem. I am hoping this message reaches someone who is using one of these small one board computers like the Quadra or Raspberry Pi successfully with the G90 and the DE 19 adapter will see this and give me some pointers that can get me going in the right direction. I am also waiting for a cable and I will try the USB soundcard option as shown in Temporarily Offline Radios YouTube "Cheap and Easy FT8 Setup for Your G90" video. Thanks in advance and 73
KN6ZVI <<Al McManus>>
 

¿ªÔÆÌåÓý

Thanks I'll check it out



KN6ZVI


-------- Original message --------
From: "Adrian Fewster, VK4TUX" <vk4tux@...>
Date: 11/30/23 23:09 (GMT-08:00)
Subject: Re: [linuxham] DE19 + Quadra + WSJTX = PROBLEMS

Have a read through this thread ;


May be useful.


73


vk4tux

On 1/12/23 16:48, KN6ZVI <<Al McManus>> wrote:
?
I have tried several ways to get my G90 using the DE 19 box to do WSJTX/FT8? with my Inovato Quadra a Linux machine and I all I is the radio locked on transmit and nothing else. I presume it is because I cannot find the right port on flrig using the G90 config in the drop down box. I confess to an almost complete ignorance of Linux and the Armbian version that the Quadra runs, so I don't really know how to chose the correct audio in and audio out ports and I believe that is my problem. I am hoping this message reaches someone who is using one of these small one board computers like the Quadra or Raspberry Pi successfully with the G90 and the DE 19 adapter will see this and give me some pointers that can get me going in the right direction. I am also waiting for a cable and I will try the USB soundcard option as shown in Temporarily Offline Radios YouTube "Cheap and Easy FT8 Setup for Your G90" video. Thanks in advance and 73
 

I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,
 

I used the DE-19 with a Raspberry PI and its version of Ubuntu Linux without any problems. The issue for you may be BRITTY service. BRITTY takes over modem device (cell phone or modem). You may need to disable the BRITTY service. Use dmesg to see if this is happening. If it is then a Internet search for "disable linux britty" should give you the instructions to disable or remove britty.

Enjoy Life, Greg
Live Well, Laugh Often, Love Much

On 12/13/2023 23:48, Bo, W4GHV wrote:
I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,
 

helped a friend with the same issue
open alasmixer, select the de19 and unmute it

1 - 5 of 5