开云体育

From hard won experience with Linux and USB-Serial adapters. Bite the bullet, and buy some "genuine" FTDI chipset based devices. They have unique USB serial numbers, that can be used with 'UDEV Rules'

About the CAT interface and FLRIG ... I used the same settings that I use on my other two RP and I just kept trying to use interface:

The port to use may show up as USB or ACM Before you turn on the radio with USB cable connected, open a terminal and type ls /dev/tty* this will show all tty ports turn on radio again run ls /dev/tty*

Thanks everyone for the info! My learning continues :) [email protected]> wrote:

I think you should be aware that Linux makes a distinction between a USB port and a serial port at a DB9 or DB25. It is even diferent in the devices in /dev folder of available devices. USB ports are

"Dan KC2STA via groups.io" <dan.ziolkowski@...> wrote: My mistake, tired old brain mis-thinking again. Yes, the FT-950 CAT is done via a USB->serial lead and the audio device is

" it will probably appear as /dev/ttyUSB0, although the 0 could be another" That's not the signalink, that would be the serial port for CAT Thanks Dan KC2STA [email protected]> wrote:

PS:?? There's more. Ive just found that the Squelch functionality with Olivia 8/250, is a bit dysfunctional too. The squelch sometimes seems to be always open, regardless of the SQL button setting,

On Sat, 15 Mar 2025 06:16:38 -0700 "Joseph Brault, KC9LFP via groups.io" <kc9lfp@...> wrote: With the Signalink you basically have an external modem in there, a TI PCM290x series chip.

Hi again. Well, this is very strange. I renamed the entire .Fldig files folder, and started up 4.2.06.24 in it's /src folder from the command line. After going through the basic configuration, things

Joseph I have been using Linux Mint Debian Edition for many years now. I have had no problem using my SignaLink on my Yeasue rig. I also run all the NBEMS software natively, including NetLogger. My

Hello, I'm in the process of setting my shack back up and want to use Linux.? Years ago I used a singalink USB and cat cable that runs to an Edgeport USB converter to connect to my pc.? This worked

Thanks Bob, I was thinking that this smacks of a config file conflict somewhere. I'll look into that, as soon as the just announced "honey doo" tasks are completed.? (Her sister is coming to stay for

Hi Dave... Also keep in mind that AFC state can now also be saved per band/modem as well, in a similar way to output level and squelch. That would certainly cause some weirdess. Look at

Hi. Well I said I'll report back.? But it'll be brief as I've been "booked for other things" (again.? I wish DM would give more advance notice, but when I suggest that, I get "The Look"!) Anyway.

Sorry scroll down to the Security section all the way at the bottom. That’s where you will see the message referenced below.

Open your System settings app and go to Privacy & Security and scroll down to the Privacy section. You will likely see “Fldigi has been blocked to protect your Mac”. Click on Open Anyway and

Hi All, I have a question on? FL Digi on a Mac.? I had an older MacBook Pro with an Intel processor.? I just bought a new MacBook Air with the M3 processor. I am having problems getting FLDigi to

Adrian…. Good point.. however, to get to the embedded audio device, the USB connectivity needs to be fully functional (that may be the reason some assume that SiLAB is required). 73’s Glenn WA6BJQ

Not sure… had zero issues with the FTdx10 on the Raspberry 5 – just need to make sure you have your user in the dialout group… typical stuff. If you don’t change your port connections the USB