开云体育

Unfortunately the X6100 does not offer VOX <vk4tux@...> wrote:

If both radio selections below do that, then revert to using vox for ptt, and setup vox in the radio. A later version wsjtx (with later hamlib) , that you may need to compile from source may work. 73

I set up like the video showed using cat. I can test cat and that works when I test ptt i get Rig failure hamlib error:communications timed out icom.c(2027):icom_set_mode return(-5) Rig_set

Latest wsjtx has X6100 in the radio select, otherwise use X108G 73 vk4tux

Try direct radio control from wsjtx instead? ; https://www.youtube.com/watch?v=u3deah6BkRM&t=1s

Currently back at square one as FLRIG is not recognizing the radio. I am using all this from KM4ACK's 73Linux <vk4tux@...> wrote:

What did you do ? 73 vk4tux

Ok that link shows many methods incl compiling, have fun. Let us know how you go ? 73 vk4tux

It appears that did the trick, it is not crashing now. <vk4tux@...> wrote:

I used software manager, trying the way that is shown in above link now. <vk4tux@...> wrote:

Did you use apt to install ? like here ; https://beebom.com/how-install-wsjt-x-linux-mint/

Also can use ; adrian@debian:~$ cat /etc/os-release PRETTY_NAME="Debian GNU/Linux trixie/sid" NAME="Debian GNU/Linux" VERSION_CODENAME=trixie ID=debian HOME_URL="https://www.debian.org/"

I installed it over a year ago myself, like I said I am a complete newbie to this side of things. Terminal says: Distributor ID: Linuxmint Description: Linux Mint 21.1 Release: 21.1 Codename: vera

When you installed linux what did you use, or did you get a Linux loaded pc/laptop ? otherwise run cmd ; lsb_release -a???? in terminal like ; adrian@debian:~$ lsb_release -a No LSB modules are

How can I view that? Is there a certain command that I can run in the terminal to tell me that? <vk4tux@...> wrote:

What is your linux OS ? Are you using a deb/rpm package or compiling ? < Please ?

For some reason I am still having issues with WSJTX just closing out all together. I removed it, and redownloaded it and I am getting the same issue. <vk4tux@...> wrote:

What is your linux OS ? Are you using a deb/rpm package or compiling ? 73 vk4tux

Also if you have HRD in windows, it also runs very well in linux under wine/bottle/crossover etc, and works great with linux wsjtx. I use it here with a FT-897D that I had issue with other methods

Yes I had CAT selected. WSJTX was randomly closing out on me, and at this time I am reinstalling it. <vk4tux@...> wrote: