开云体育

posted to Source Forge, and http://www.w1hkj.com/files/fldigi/ Index of /files/fldigi * Parent Directory <http://www.w1hkj.com/files/> * AppleAudioCodec.html

I ran FLRIG from the terminal. It initially followed the rig's tuning, but when I tuned the rig to exactly 14.200.00, it disagreed. This is repeatable At 14.200.00. It doesn't do that at frequencies

The Country (CTY) Files were updated on 20 April 2024: https://www.country-files.com/cty-3414-20-april-2024/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse

I was just about to settle down and look at a problem I was having with filter width displays on IC-705. Then this came in, so I recompiled flrig with the latest alpha. The problems I had have gone

at http://www.w1hkj.com/alpha/flrig/ * flrig-2.0.05.45.tar.gz <http://www.w1hkj.com/alpha/flrig/flrig-2.0.05.45.tar.gz> * flrig-2.0.05.45_LI.dmg

Steve, Substitute the attached two files for the ones of the same name in the flrig source tree.? Rebuild and then run from a command line terminal. Test: Read/Set VFO A ????? Read/Set VFO B

Thanks Bob, Spend a couple of hours this afternoon doing some investigations. As far as I can tell, there is no discernible difference between the two pairs of Audio Codecs. The only difference I can

Hi Phil Enumeration depends on the polling order of the PC and whether the rig(s) are on at the time. If both rigs are on every time you reset the PC's USB bus and the plugs remain in the same sockets

Thanks Bob, The two icoms get enumerated ok, but the enumeration changed after a reboot. Probably as a result of adding the IC705 after the previous reboot. It seems to be stable since. The two FLdigi

Hi Phil Some info for your situation - I use a pulseaudio environment startup to distinguish between between an Icom and QDX. (The Exec command in a desktop file) eg /bin/sh -c

Hi Everybody, I have just released version 0.1alpha of AHRL on the Raspberry Pi 5. https://sourceforge.net/projects/kb1oiq-andysham/files/raspberry_pi/0.1alpha/ Please ask questions and discuss issues

Making some progress. I'm now in the maze of twisty little passages all alike. I reverted to selecting PortAudio->pulse in fl;digi. I found where I can connect a specific instance of fldigi to the

The S meter works. I forgot to enable it.

FLRIG now displays the rig frequency for both VFOs. Initially did not update frequency from the rig when changing bands. It won't when vfoA/B are out of sync. FLRIG dies not change to the rig's VFO

Yip, Please substitute the attached for the file of the same name in src/rigs/kenwood/ Rebuild, test, and report results. Dave

Yip, That is already in the TS-570/S code. transmit: TX; receive : RX; David

Steve, Please repeat your testing using the attached file for FT890.cxx David

After a reboot, the USB Audio Codecs occasionally both appear in the PortAudio drop down lists. What I had forgotten as it used to work is that I get a lot audio related output on the terminal (see

Until recently I sort of had this sussed. Running debian bookworm. Fldigi 4.2.04.09. The only rig I used with FLdigi was my IC-7300. I had configured fldigi to use pulseaudio. After a reboot the order

Thank you Steve.