开云体育

Kenny, Just go to the prefs and click Update and then choose your serial port again. I do the same thing often. Flrig only lists the active ports as you. Flrig doesn't know if the serial port name has

http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.04.13.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.04.13.tar.gz> * fldigi-4.2.04.13_LI.dmg

If could be useful, I compiled also flwkey. Same issue, compile was fine (some warnings) but crashes when I run it. Flwkey has less libraries than fldigi, I mean no hamlib, sound libraries, etc, so

I use FLrig for all my apps (CQrlog, WSJTX, JS8Call, QSSTV, etc.) with multiple radios, each with its own Prefs file. However, how come sometimes when I get an error trying to connect to my

Hi Dave I note that this dev update doesn't appear as a parameter of the default/generate config script. I assumed this will (hand edited) work but note it does not; ID: ?? RSID: ?????

Done, backtrace attached.

Johnny, Please use this procedure: https://sourceforge.net/p/fldigi/wiki/linux_debug_howto/ It will insure that you are starting from a clean configuration.? Capture the backtrace lines and post them

RPi4, 2 GB I try with two different devices, both with the same OS. Try also compiling without rpi4 optimization, as suggested by Ken, same result. Running? from command line, this is the output

Start fldigi from the command line and once it crashes, you should see from crash details and/or a core dump. Post those details here on this thread. If you have the advanced skillset and If you're

Which version of the Pi ? David

And attached is the output of make, with several warnings

This ./config is strange: checking for flxmlrpc >= 1.0.1... no checking for libmbedtls >= 2.16.0... no and flidigi use internal lib libmbedtls .................. internal lib flxmlrpc

I follow the previous suggestions but nothing to do. Compile is ok, but fldigi crashes after the configuration wizard. Attached the config.log

http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.04.11.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.04.11.tar.gz> * fldigi-4.2.04.11_LI.dmg

Hi Ken, It sure seems to be here, at least in NE Texas. We're in our third day of rain & T-storms, 3.3" in the first 24 hours. More next week they say also, glub, glub, glub. :-) 73, Cliff, AE5ZA

Cliff, I do not use it, just thought it might be contributing to the problem he was having, since I saw it in the command string on the website that was referenced. Hope Spring has arrived in Texas!!

Ken, That parameter is only for 32bit RPI system. He says he is using 32 bit. If yours is 64 bit, like mine, you can't use that parameter. 73, Cliff, AE5ZA

Dave, I noticed that the procedure that he previously referenced to build fldigi has the following command extension: ./configure --enable-optimizations=rpi4 Adding this command to "./configure"

The difference in fldigi compilation will be negligible.? Linking will be a very little bit longer, but you should be able to measure that even on the Pi.? The header files are necessary for the

Sorry, another question. fldigi needs static hamlib? Because usually i compile only the shared libraries in order to short the computation time.