开云体育

Phil, Can you help me understand the connection between flrig and Hamlib? If fldigi only one or the other will be operational at any one time. 73, Cliff, AE5ZA

Hi Bruce, A couple of things to check: The Transmit Attenuator for fldigi, lower right hand corner, adjusts the power out, not anything on the rig unless you want to limit the rig. Set the rig to full

I have recently bought a new rig IC705 in addition to the IC7300 I already have. I have created two aliases for flrig to access the two rigs using --config-dir. I have configured each instance of

I am setting up fldigi and wstj-x for a friend on his Windows 10 computer connected to an IC-7100. I can't get fldigi to work correctly. * fldigi is using flrig as its rig control. The controls on

Very nicely done Sir's. 73. Dave G0WBX. -- Sent from a MicroSoft free zone:

helped a friend with the same issue open alasmixer, select the de19 and unmute it

As some in this group may know, that I have been working on an open source SDR that uses FLDigi in the backend. The sBitx is based on the Raspberry Pi. The v3 version of the software works even on the

Like that quote !!! As a retired ee i can relate.

I used the DE-19 with a Raspberry PI and its version of Ubuntu Linux without any problems. The issue for you may be BRITTY service. BRITTY takes over modem device (cell phone or modem). You may need

Yes, but the dialog shown on StackExchange shows a submenu. First choose 6 the advanced menu, then A6 for the Wayland to X11 conversion... Then after the X11 setting is active do a reboot and then in

I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,

Noted this is the Win fldigi group. Is there a Linux group? Whoops. I found it and will post there. Anyhow, a simple question for Linux fans. fldigi displays the audio connections of the top picture.

I second the motion to not use wayland yet. As bad as X11 is code wise. It just works well for the user. see this link for how to do that:

The issue is Xwayland. Go back to the last version it runs great with fldigi etc. Been doing it for years. Xwayland is not ready for prime time on the Pi. I'm running 64bit PiOS on my Pi-400. I also

Weell. The saga continues... Installed Ubuntu on ssd. Still slow.? Xwayland still hogs cpu. Then wrote over ubuntu with pi-os. Still same.? Xwayland hogging cpu.? I guess I'm about done trying to

Thanks for the heads up Cliff. I will install the update and let you know. I wasn't aware it was USA calls only, but for the nets I use it on, that is no problem. 73 Mark Gregory AB9ZA

Mark, Dave's fixed it. Give version 7.5.0.13 a go. Go to www.w1hkj.com/alpha/flnet <http://www.w1hkj.com/alpha/flnet> and grab the file you need. I assume you know Callook.info <http://callook.info/>

The Country (CTY) Files were updated on 12 December 2023: https://www.country-files.com/cty-3341-12-december-2023/ For installation instructions, start at: https://www.country-files.com/ Hover your

Cliff, Thanks for the update. Mark Gregory AB9ZA

Mark, Yes, it doesn't work in flnet. Dave made some change to the lookup in fldigi so it works there, but it needs to be fixed in flnet. I'll let him know and hopefully he'll get it before too long.