开云体育

Great ! I've got the image on a 6tb usb drive. I'll just burn it to the ssd and be done. I used Gparted to expand to 256gb drive. Thanks Cliff Stan W8SRD

The way I do it to a USB to an SSD is to boot to the SD Card and use the utility in the Accessories menu called SD Card Copier. It just images what's on the SD Card to the SSD. As I recall the SSD

woops, spoke too soon. Now it does not work, again. Even toggling the wayland setting did not work. First time it ran great. guess running off ssd on usb port is the next thing to try. if i can find

James, It depends on the radio. The 7300, for instance, can be turned on and off by commands. Flrig does that if the user sets it up. Whether it can be done via some RigCat command I don't know, but

Thanks I'll check it outKN6ZVI

Hello I am working on a xml file for RigCAT. I would like to know if there is anyway to send commands to the radioon startup? Thanks for the help James KC6UCN.

I have tried several ways to get my G90 using the DE 19 box to do WSJTX/FT8? with my Inovato Quadra a Linux machine and I all I is the radio locked on transmit and nothing else. I presume it is

FIXED !!! Installed raspi-config sudo apt install raspi-config then run as admin sudo raspi-config go to advanced settings choose to run wayland experimental done Xwayland was what was sucking down

open pavucontrol. you may need to changes some audio routing Thanks Dan KC2STA -- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX

I have the latest linux mint, installed wine, and CwSkimmer seems to be running just fine....EXCEPT The only Audio I/O device it lets me select is '01 Pulseaudio' and that seems to be incorrect as my

"Dave, W1HKJ" <w1hkj@...> wrote: Thanks, that nailed it. Luckily it was a fairly small change. -- Brian G8SEZ

Brian, Apply the attached patch (or wait for next source release / push to Source Forge) Dave

"Dave, W1HKJ" <w1hkj@...> wrote: FYI Dave there is a newly created 'feature' in hamlib-4.6~git that caused some problems with compilation in freedv. It seems to be the same with fldigi:

at http://www.w1hkj.com/alpha/fldigi/ Index of /alpha/fldigi * Parent Directory <http://www.w1hkj.com/alpha/> * fldigi-4.2.03.08.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.03.08.tar.gz> *

You should see what we see on 40m and 20m over hear re FT8/JS8 "QRM" leaching over other band segments a lot of the time. Evidence of harmonic distortion in the TX audio stages, as often two or three

I just finished drafting a set of custom forms for use with flmsg (v4.0.17).? The forms were constructed using an external CSS reference (<link rel="stylesheet" href="mycss.css"> inside the HTML

There is a flrig.prefs and a rig.prefs the radio name.prefs is it starts and gets setup. It's created on the first exit so it you're hanging and completing a normal setup and close down then no

I can confirm that transmitting with pulse causes the audio thread to 100% cpu usage and a zombie after exiting the program.? This is on Linux Mint 21.2 64 bit.? No change from earlier version.

Hi, I am having the same problem: 1.4.7 works fine on my M1 MBP, running OSX13.4.1, but upgrading to flrig 2.0.03 or 04 simply won't start. I cannot locate a xiegu.prefs file in my Home directory

See responses in-line - ZZA Sent: 29 November 2023 17:38 To: ham-software@...; ham-mac; winfldigi; [email protected]; [email protected] Subject: [linuxham] #whats wrong with this image My