开云体育

Error also for me, here the error message, maybe the same of KE5HDF: qsstv: error while loading shared libraries: libhamlib.so.2: cannot open shared object file: No such file or directory It looks

oooops silly me ! I forgot activating tooltips ! it's OK using shift+click on A/B button does the job (right click seems to do nothing, no problem my rig is coninuously in CW) Thank you so much Cliff

Paul, The power level is basically an audio drive level. Normally Wsjtx remembers what it was last set to and comes up with that setting. At least it does that here. No setting I know of to preset to

Giorgio, Do you have "Tooltips" on in flrig. On my 7300, which is very similar to the 7610 I get this by hovering over the A/B button: A/B button: Left click - Swap A/B as active vfo. Right Click -

I;m not seeing any power indication when I transmit. I need to manually enter the power after checking it on Flrig or my radio. IS there an option I'm missing? Attached a .png of what I see. 73 Paul

Hello. To make equals (in terms of QRG and Mode) VfoA and VfoB (or better Main and Sub) the 7610 asks for a SPLIT button long press. In consequence of this if (for example) your rig currently have

Execute in terminal cqrlog debug=1 and paste here your error. El dom, 3 dic 2023 a las 22:52, Dan KC2STA (<dan.ziolkowski@...>) escribió:

Ralph can you open them in a terminal? Thanks Dan KC2STA wrote: -- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX

I also found it easy to use, but QSSTV recently quit working. It will not even open. Several of my apps have recently stopped working ...CQRLOG, FLDIGI, and QSSTV I click on the icon and nothing

Great ! I've got the image on a 6tb usb drive. I'll just burn it to the ssd and be done. I used Gparted to expand to 256gb drive. Thanks Cliff Stan W8SRD

The way I do it to a USB to an SSD is to boot to the SD Card and use the utility in the Accessories menu called SD Card Copier. It just images what's on the SD Card to the SSD. As I recall the SSD

woops, spoke too soon. Now it does not work, again. Even toggling the wayland setting did not work. First time it ran great. guess running off ssd on usb port is the next thing to try. if i can find

James, It depends on the radio. The 7300, for instance, can be turned on and off by commands. Flrig does that if the user sets it up. Whether it can be done via some RigCat command I don't know, but

Thanks I'll check it outKN6ZVI

Hello I am working on a xml file for RigCAT. I would like to know if there is anyway to send commands to the radioon startup? Thanks for the help James KC6UCN.

I have tried several ways to get my G90 using the DE 19 box to do WSJTX/FT8? with my Inovato Quadra a Linux machine and I all I is the radio locked on transmit and nothing else. I presume it is

FIXED !!! Installed raspi-config sudo apt install raspi-config then run as admin sudo raspi-config go to advanced settings choose to run wayland experimental done Xwayland was what was sucking down

open pavucontrol. you may need to changes some audio routing Thanks Dan KC2STA -- Dan Ziolkowski KC2STA SKCC #4290T Ubuntu LINUX

I have the latest linux mint, installed wine, and CwSkimmer seems to be running just fine....EXCEPT The only Audio I/O device it lets me select is '01 Pulseaudio' and that seems to be incorrect as my

"Dave, W1HKJ" <w1hkj@...> wrote: Thanks, that nailed it. Luckily it was a fairly small change. -- Brian G8SEZ