----- Original Message ----- From: "Marty Hartwell, KD8BJ via groups.io" <mhartwe@...> To: "Linuxham Mail List" <[email protected]> Sent: Wednesday, November 20, 2024 10:44:16 AM Subject: [linuxham] link to CHIRP
Hi
I am having a hard time updating my CHIRP (radio programing) application on my Xubuntu system. Anyone have a link I can use to download the latest version?
I am having a hard time updating my CHIRP (radio programing) application on my Xubuntu system. Anyone have a link I can use to download the latest version?
I am looking for signed and notarized versions of GridTracker and JS8call for use on a Mac.
I have a Mac computer with an M2 chip currently running MacOS 14. Since Apple is requiring Apps to be signed and notarized before they can be opened on MacOS 15, I am holding off a bit on upgrading to MacOS 15.
I have already been able to download Flrig, Fldigi, Flarq, and WSJT-X that will work on MacOS15.
I am looking for GridTracker that will work on MacOS 15 before I take the plunge and upgrade to it.
I use Fldigi to control my radio, then WXJT-X (or Fldigi or JS8call), then feed that into GridTracker2 with the output of GridTracker2 going into RUMlogNG, my logging program.
RUMlogNG is already in the Apple App store.
So I am looking for GridTracker and JS8call. GridTracker being a higher priority at this point for me.
Does anyone have any information about these two programs re MacOS 15??
On Nov 19, 2024, at 2:19?PM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Philip, latest version of Flrig (that I have) is here:
I should state that I am just signing and notarizing the Fldigi apps that have already been compiled by David until he can get his Apple Developer ID.
WSJT-X_Improved apps that are notarized and compiled for Apple chips can be found at:
Look for the files that end in M1.zip. The Plus version is most like WSJT-X in terms of layout. AL_Plus is optimized for laptops (which is what I use) and Widescreen is optimized for large monitors.
For JS8Call and Gridtracker, I would approach their developers directly. Both programs are on?. I¡¯m willing to help out but don¡¯t want to get crosswise with those developers.
On Nov 19, 2024, at 12:37?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:
Gary,
Hello. I was very happy to see your email.
I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the ¡°side loading¡± issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?
Is there anything I can do to help??
Thanks,
Philip
AC4O
On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note: ? - added SCAMP mode ? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution. ?????Should only require a single response to the "use microphone" dialog.
On Tue, Nov 19, 2024, 8:42?AM Dave, W1HKJ via <w1hkj=[email protected]> wrote:
?Turn off all other serial
access to the transceiver/digirig before starting and
configuraing flrig.? Suggest rebooting the computer before
starting flrig.
reboot computer
turn on transceiver
start flrig
configure flrig
start WSJT-X and set up
to use "flrig" as the transceiver interface
start JS8Call and
configure similar to WSJT-X
The will allow fldigi,
JS8Call, and WSJT-X to operate simultaneously, all with
transceiver control via flrig.
73, David, W1HKJ
On 11/16/24 09:13, Riley Gossling,
KF0QMQ via wrote:
Yeah the strangest thing is that I have cat control through
JS8Call and WSJT-X working fine?
Philip, latest version of Flrig (that I have) is here:
I should state that I am just signing and notarizing the Fldigi apps that have already been compiled by David until he can get his Apple Developer ID.
WSJT-X_Improved apps that are notarized and compiled for Apple chips can be found at:
Look for the files that end in M1.zip. The Plus version is most like WSJT-X in terms of layout. AL_Plus is optimized for laptops (which is what I use) and Widescreen is optimized for large monitors.
For JS8Call and Gridtracker, I would approach their developers directly. Both programs are on?. I¡¯m willing to help out but don¡¯t want to get crosswise with those developers.
On Nov 19, 2024, at 12:37?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:
Gary,
Hello. I was very happy to see your email.
I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the ¡°side loading¡± issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?
Is there anything I can do to help??
Thanks,
Philip
AC4O
On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note: ? - added SCAMP mode ? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution. ?????Should only require a single response to the "use microphone" dialog.
Try this, see if there is another process using the default local address. I do not know if the 127.0.02 address is used by your system you may need to change it to something else.
I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the ¡°side loading¡± issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?
On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note: ? - added SCAMP mode ? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution. ?????Should only require a single response to the "use microphone" dialog.
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and
48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the
"malicious" software warning during first execution.
???? Should only require a single response to the "use
microphone" dialog.
Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and
48 hour
? -? MacOS users on MacOS > 13.x.x will have to ignore the
"malicious" software warning during first execution.
???? Should only require a single response to the "use
microphone" dialog.
?Turn off all other serial
access to the transceiver/digirig before starting and
configuraing flrig.? Suggest rebooting the computer before
starting flrig.
reboot computer
turn on transceiver
start flrig
configure flrig
start WSJT-X and set up
to use "flrig" as the transceiver interface
start JS8Call and
configure similar to WSJT-X
The will allow fldigi,
JS8Call, and WSJT-X to operate simultaneously, all with
transceiver control via flrig.
73, David, W1HKJ
On 11/16/24 09:13, Riley Gossling,
KF0QMQ via groups.io wrote:
On Tue, Nov 19, 2024, 7:21?AM N5VMO Pat via <n5vmo00=[email protected]> wrote:
Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =)
Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =)
I have not tried that. I would like to exhaust all other options before opening it up and modifying it, since the logic levels selection works fine with other software.
A note, the tiny10 installation was on the same computer I had been trying to get working with linux, the windows 11 installation was a different computer.
Alright I've tried installing the latest flrig software on both tiny10 (a stripped-down version of windows 10) and actual windows 11 and I get the same errors.
?
This leads me to believe the issue is with my Digirig setup, but I know others have used their digirig with flrig and I don't have any issues with WSJT-X or JS8Call.
Sorry... I'm trying to write a script that starts a program that was installed in a CrossOver Bottle. I can get the script to start CrossOver but I cannot get the script to start the program that's been installed in the Bottle.