开云体育

Unfortunately that does not work on some machines.? My MacAir with an M2 and Sonoma does the same thing.? This appears to be a change in the microphone security policy.? Totally anal.

I am investigating.

73, David, W1HKJ

I downloaded 4.2.05 on my Mac M1 (Sonoma 14.4.1) today and when I go to open it I keep receiving a dialog box asking for permission to access the microphone. ?When I click allow the dialog box just keeps popping up endlessly. ?Tried restarting and same issue.

4.2.03 still works fine.

开云体育

posted at

and at

Corrects bandwidth selections.

Thank you Mike, W9MDB.

73, David, W1HKJ

Hi David

Sorry, forget to said my work on MS Window 10.

Yip
VR2VRC?

开云体育

Hi.

Fldigi ver4.2.05 successfully built and running here on LMDE 5 64 bit, all OK.

I still see, that I can't see the rx IMD figures for PSK modes other than PSK31.



For all the higher PSK modes (PSK61 and faster) it shows a "Phase" figure in %.
I.e.

(Yes, it's not a PSK63 signal under the cursor, I know that.)


Is this a "Feature" or a "Bug"?? (If "Feature", why?)

I've asked this before when a previous release came out, but never seen an answer.
(If it was sent, It got likely got lost in the noise of other stuff...)


73.

Dave G0WBX.




--

Sent from a Micro$oft free zone:

开云体育

Repeating what Joel Black just told y'all.

Open the MacOS Finder

Press and hold the Cmd key
Press and hold the Shift key
Press the period '.' key

Your Finder window should now show hidden files and folders.? One of which should be named ".fldigi", that is DOT FLDIGI.

Double click on that folder and the Finder will display the hidden folders contents.

This book available on Amazon has great reviews:



David, W1HKJ

On Wed, Apr 17, 2024 at 01:42 AM, Dave, W1HKJ wrote:

where the path of folder??

VR2VRC

开云体育

If you execute the following: CMD+SHIFT+. (hold them all down at the same time) you will display hidden files on a Mac. That is CMD+SHIFT+[period] in case that “.” is ambiguous. You can issue the same command to re-hide files and folders if you like.

Thanks for the suggestion, David. I've done a few very minor things in Terminal, but I'm not real experienced at all. I tried just entering what you did, but couldn't get past the second line. I don't know how to search for hidden files.

Yes, I've tried them both. Neither will open. Interestingly, FLAMP and FLMSG will both open, but not FLDIGI.

开云体育

The VN dmg is built on a Mac mini / M2 / 14.4.1, and then tested on a Mac mini / i7 / 14.4.1.? It should run OK on an M1 based machine.

Open a terminal window:

$ cd
$ ls -a
look for hidden folder .fldigi? (dot fldigi)

if found:

$ cd .fldigi

and then delete these two files "fldigi_def.xml" "fldigi.prefs"

then

$ cd /Applications

$ ls fldigi*

if found:

$ cd fldigi*app
$ cd Contents
$ cd MacOS

$ ls

you should a a single file "fldigi", execute it from the command line

$ ./fldigi

Does the applcation start ?? If yes, proceed to configure fldigi being sure to select "file only" for the soundcard if you do not have a transceiver connected to the computer.

Report back please.

David

I've been trying for days to get FLDIGI to work on my M1 Mac running Sonoma 14.4.1. But when I try to open it, it closes immediately. Does anyone have a solution? Thanks!

开云体育

posted to Source Forge, and

Index of /files/fldigi

On line help also updated to this version.

Refer to the readme.txt file for a chronological list of changes since 4.2.04.

73, David, W1HKJ

I ran FLRIG from the terminal. It initially followed the rig's tuning, but when I tuned the rig to exactly 14.200.00, it disagreed. This is repeatable At 14.200.00. It doesn't do that at frequencies above or below that.
Grig doesn't do that.
Starting FLRIG with the rig set to 14.200.00 causes the rig not found pop-up. The init button does the same. I can change the frequency slightly to fix this.
---
Using VFO A, the rig was tuned to 14.200.00 and FLRIG displayed 14200.02
The terminal displayed
Info: 0D 15 AA E2 00 00 02 04 05 09 0A CB 48 00 00 01 04 85
?? A: 14200020, AM
?? B: 7074000, CW
Flag Bytes??? 80 00 00 08 50
? Split:????? OFF? Active vfo: B? PTT:??????? OFF

failed to read VFO status bytes (18)
failed to read VFO status bytes (18) ...repeating...
---

The yellow light in the PTT button lights when the rig is transmitting.

* Read/Set VFO A
I can set the frequency from FLRIG or the rig (except as noted above)

* Read/Set VFO B
When I click vfoB, FLRIG displays the vfoB frequency from the rig. FLRIG display follows the rig's VFO, but I cannot change the rig's frequency by changing vfoB on FLRIG. FLRIG just reverts back to the rig's frequency.
vfoB does not have the problem with 14.200.00 that vfoA has.

* Read/Set VFO A/B active
The FLRIG highlight follows the VFO A/B setting from the rig.
The rig switches to the VFO that FLRIG requests.

* Read/Set Split
The yellow light in FLRIG's Split button does not change when split mode is changed from the rig.
The rig and the split button light agree when set from FLRIG.

* Read Smeter
S meter follows the rig's meter relative to the signal, however FLRIG reads lower.

* Read power out
On the FLRIG 100 watt scale, with 100 watts on the rig, FLRIG showed 55 watts and changes with power output.
The FT-890 needs 50 watt and 150 watt scales.

The modulation mode menu puts the rig into the correct mode, but the menu changes to read something else:
LSB reads LSB
USB reads CW
CW reads AM
CW-N reads AM
AM reads FM
AM-N reads FM
FM reads LSB
FM-N reads LSB

Sometimes when FLRIG is started or quit, changes the rig to a frequency and mode other than it was set to.
It seems to eventually leave the frequency unchanged when I keep setting it back to the desired frequency.
Maybe mode problem could be from the mode menu issue.

The Country (CTY) Files were updated on 20 April 2024:



For installation instructions, start at:



Hover your mouse over the word Contest in the menu, then select the
software you are using.

To install the file, follow the link to your software at the top of the page.

If you are interested in a bigger CTY.DAT for everyday logging, you can get
it here:



Note that the release notes (and Version Entity) for this larger file are
different than what is shown below. There is a separate link to them.

As a reminder, there is an RSS feed of the latest country file announcements:



Here are the release notes:

20 April 2024 (CTY-3414)
VER20240420, Version entity is Kyrgyzstan, EX

Added/changed Entities/Prefixes/Callsigns:

* 3D2CCC is Conway Reef, 3D2/c
* TO2FY is French Guiana, FY
* GB8DDY is Northern Ireland, GI
* GB1FT, GB6DD and GB8VED are all Scotland, GM
* GB0ILB is Wales, GW
* IT9PQJ/0 is Italy, I
* IQ0SS/P is Sardinia, IS
* K1GJQ, K3EYJ, N4CUC, N5DIM, NO5O, W0MOT, W5BMO, W9PDC, W9SSS, WA0RMW,
WA1NHZ and WE4BY are all United States, K in CQ zone 3, ITU zone 6
* K7AER is United States, K in CQ zone 3, ITU zone 7
* K7SWS and N6IGA are both United States, K in CQ zone 4, ITU zone 6
* K7MOE, K8VH, K9TWW, KB9TYC, KC9CSQ, KC9LBO, KD2CFD, KE7RTB, KF7ZYV,
KJ4EBE, KN4SLP, N6TCO, N7TBU, N9JNQ, N9ZW, NA7XX, ND9M, W2HK, W2RPC, W6EHY,
W6NJB, WB9WKT and WJ9H are all United States, K in CQ zone 4, ITU zone 7
* AA4QM, AD5IT, K0BBQ, K4HHA, K4IDT, K4JW, K4TEP, KA0S, KB4IY, KD4BWM,
KD5UVV, KD5YBE, KG5EG, KI4ZRH, KI5HVD, KI5VNB, KJ4DVR, KJ5AZV, KJ6XC, KK4EM,
KK4VPT, KK4XA, KN4JGH, KO4IDC, KO4TNK, KO4TUP, KO4UFD, KQ4AHO, KQ4AZN,
KQ4IMY, N0KWA, N0XMD, N0XOH, N1RIP, N2CCG, N2GSB, N4BCD, N4EJW, N4RRW,
N6XBP, W0CGC, W1WWA, W4JGD, W4PGM, W4YEM, W5LNX, W5OBM, W5SPH, WA4III,
WB4KUU, WM4U, WV4E and WX7AA are all United States, K in CQ zone 4, ITU zone 8
* AJ6TE, K5NT, K5YDR, K8II, K9KA, KA8VZB, KB0NVR, KE8TEH, KM6UH, KU8V,
KW5DRE, N0TR, NA5Y, NQ8C, W0GZR, W0RMX, W5MPB, W6ALG, W6GOK, W8ANT, W8DOF,
W8QI, W9JJ, W9MGB, W9NWY, WB7RAV, WB8WUP, WG9X, WJ0J, WN8KXY and WO0M
are all United States, K in CQ zone 5, ITU zone 8
* K6KOA is Hawaii, KH6
* AG7XM and KE5APD are both Alaska, KL
* KD2RCT is Puerto Rico, KP4
* LU1EQF/D and LW2EDM/D are both Argentina, LU
* LU1XA/XA is Argentina, LU in ITU zone 16
* 5P0WARD/D, 5P0WARD/E, 5P0WARD/H, 5P0WARD/I, 5P0WARD/U, 5P0WARD/W,
5P0WARD/X and 5P0WARD/Z are all Denmark, OZ
* R1961AG, R1961GP, R1994YU, R1996VK, R2014NC, R80SEV, R9KC/6, R9XD/6,
RN2F/1, RW6MD/1 and UA0QNI/3 are all European Russia, UA
* R4WAN/P, UA9SY/4 and UG4I/P are all European Russia, UA in ITU zone 30
* RI0POL is European Russia, UA in CQ zone 40
* UA9AR/P is Asiatic Russia, UA9
* R2ET/9 is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31
* R3DFE/9/P and RA1WS/0 are both Asiatic Russia, UA9 in CQ zone 18, ITU zone 32
* VI60ATZ is Australia, VK

Removed Entities/Prefixes/Callsigns:

* 4UNR in Vienna Intl Ctr, *4U1V
* 3D2CR in Conway Reef, 3D2/c
* VP8CP in Antarctica, CE9
* TO4A in Martinique, FM
* TX0QRP in French Polynesia, FO
* GB0DS in Wales, GW
* AG1RL, AL4B, KD9ATF, KL4J, KN0A, KY0W, N1IPB, NK9I, WB2UBW and WB5NHL
in United States, K
* KC8UHF in Hawaii, KH6
* AC5D and N7DKL in Alaska, KL
* LU1HAK/H, LU2AJG/K, LU5EFG/D, LU5YBJ/V, LU6HL/H, LU7HCH/H, LU9EKQ/D,
LW5DHG/D, LW5DIT/D and LW9EUE/D in Argentina, LU
* 4UNR in Austria, OE
* R35AFC, R35AFQ and R35DRA in European Russia, UA
* R35AFA, R35AFZ and RX9WT/P in Asiatic Russia, UA9

Though I am subscribed to this reflector so that I can make these
announcements, I do not see most messages posted to it. If you have
any comments or corrections to the country file, please contact me
directly.

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>,

开云体育

开云体育

at

See readme.txt for list of changes.

73, David, W1HKJ

开云体育

Steve,

Substitute the attached two files for the ones of the same name in the flrig source tree.? Rebuild and then run from a command line terminal.

Test: Read/Set VFO A
????? Read/Set VFO B
????? Read/Set VFO A/B active
????? Read/Set Split
????? Read Smeter
????? Read power out

73, David