开云体育

Thanks Paul, If you read all of my post, you will see I made that mistake at first but then corrected it and still suffered the problem. My logger tried to connect to the last rig used regardless as

Both instances of flrig are trying to use the same port for xmlrpc (probably 12345). Only one server can be on the same port at one time. The second one will fail to start. If both could run together,

Thanks.

The sbitx boards are available on www.hfsignals.com

Great work Ashar. Dare I ask if anyone has designed PCB's or offering kits for theSibtx?

So somehow your logger connects to flrig? For me I use Fllog and it connects directly to fldigi and flrig connects directly to fldigi. I suppose your logger has some special features that are helpful

Progress (I hope). I realised my logger is attempting to connect to the rig that was used for the last QSO even if it's not connected. I suffered the hamlib timeout every time I start my logger ?

Hi Cliff, Hamlib has as one of its rigs: FlRig. Hamlib can drive the xmlrpc interface to flrig. I found that easier to use than trying to control the xmlrpc from within my logger. BTW I've made

Phil, Can you help me understand the connection between flrig and Hamlib? If fldigi only one or the other will be operational at any one time. 73, Cliff, AE5ZA

Hi Bruce, A couple of things to check: The Transmit Attenuator for fldigi, lower right hand corner, adjusts the power out, not anything on the rig unless you want to limit the rig. Set the rig to full

I have recently bought a new rig IC705 in addition to the IC7300 I already have. I have created two aliases for flrig to access the two rigs using --config-dir. I have configured each instance of

I am setting up fldigi and wstj-x for a friend on his Windows 10 computer connected to an IC-7100. I can't get fldigi to work correctly. * fldigi is using flrig as its rig control. The controls on

Very nicely done Sir's. 73. Dave G0WBX. -- Sent from a MicroSoft free zone:

helped a friend with the same issue open alasmixer, select the de19 and unmute it

As some in this group may know, that I have been working on an open source SDR that uses FLDigi in the backend. The sBitx is based on the Raspberry Pi. The v3 version of the software works even on the

Like that quote !!! As a retired ee i can relate.

I used the DE-19 with a Raspberry PI and its version of Ubuntu Linux without any problems. The issue for you may be BRITTY service. BRITTY takes over modem device (cell phone or modem). You may need

Yes, but the dialog shown on StackExchange shows a submenu. First choose 6 the advanced menu, then A6 for the Wayland to X11 conversion... Then after the X11 setting is active do a reboot and then in

I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,

Noted this is the Win fldigi group. Is there a Linux group? Whoops. I found it and will post there. Anyhow, a simple question for Linux fans. fldigi displays the audio connections of the top picture.