ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
Re: fldigi 4.2.06.09 posted at
Spoke too soon!
The AFC button has been greyed out (in all modes) but from the
behaviour of things, AFC is still active!.
I tried a restart of Fldigi, but it is still disabled.
Just looked again, (flipping between different workspaces) and
the AFC button is no longer greyed out!
I've NOT changed modes or anything, so ????
Is this a new feature, if so where to disable said feature!? ;-)
Oh, there are some truly awful PSK signals about these days.?
"Never mind the quality, just see the width!"? They "sound" wrong
too.? One, sounds like it is being piped down a metal tube, as
well as all the IMD sidebands, plus the third harmonic appearing
in the waterfall.? He's only S5 with me, so must be his end, as
far stronger signals are clean.
73.
Dave G0WBX.
On 22/11/2024 16:11, Dave Baxter wrote:
toggle quoted message
Show quoted text
Hi.
Built locally on a fresh install* of LMDE 6 (Faye) without
issue, (i5 CPU? 8G RAM.)? The potential jump to another distro
was a bit too much to handle at this time!
(I used? ./configure --enable-optimizations=native? of course.)
So far, no oddities found.? Even the Rv button seems to behave
at the moment!
Thanks and 73.
Dave G0WBX.
*? After an unfortunate bit of fat finger trouble a few days
ago!? Resulting in it being far easier to flatten and start
over, than trying to unpick the mess!? So, also had to build as
new Flrig 2.0.05.75 too, and other things...? Most of my backups
worked!? Those that didn't were either not that important or I
had other ways to restore what got trashed or otherwise went
missing.?? The first unrecoverable mess up, for some years!?
What I did loose of course, was a lot of time!
|
Libre Le Potato/Bookworm for HamClock - didn't work
Tried flashing (from Libre website) and building HamClock but it failed.? Got one error message on updating and, when I was in terminal mode, it said "Error loading."? I thought it would work.? Has anyone been able to or does it have to be on a RPi?
|
Re: fldigi 4.2.06.09 posted at
Hi.
Built locally on a fresh install* of LMDE 6 (Faye) without issue,
(i5 CPU? 8G RAM.)? The potential jump to another distro was a bit
too much to handle at this time!
(I used? ./configure --enable-optimizations=native? of course.)
So far, no oddities found.? Even the Rv button seems to behave at
the moment!
Thanks and 73.
Dave G0WBX.
*? After an unfortunate bit of fat finger trouble a few days
ago!? Resulting in it being far easier to flatten and start over,
than trying to unpick the mess!? So, also had to build as new
Flrig 2.0.05.75 too, and other things...? Most of my backups
worked!? Those that didn't were either not that important or I had
other ways to restore what got trashed or otherwise went
missing.?? The first unrecoverable mess up, for some years!? What
I did loose of course, was a lot of time!
|
Those changes were made over 4
years ago.? If you need to reinstall an older version of the
software these are available at
73, David, W1HKJ
On 11/22/24 01:01, Asbesto, IW9HGS via
groups.io wrote:
toggle quoted message
Show quoted text
Hello,?
In FLDigi 4.1.9 that I had on my old computer I was able to
set some things about WEFAX that now are disappeared in the
newer versions...
I have a new laptop, I installed the recent version of my
GNU/Linux OS, and some options are missing.
I don't have anymore the "LPM" setting, the FIR setting nor
the 4 bargraph showing START, PHASE, IMAGE... and I think
also the "skip phase" is missing.?
The
main problem is the "LPM" setting, because I can't set it
correctly to receive Kyodo News from Japan.
Kyodo
News require IOC576 with 60LPM and I can't set it
What
I receive now is basically a half page, the other half is
cut away and I can't solve this problem.
Is there some way to get back those settings for?WeFax? I think now it's unusable
for KYODO NEWS decoding.?
Thank you
--
73 DE IW9HGS
|
Hello,?
In FLDigi 4.1.9 that I had on my old computer I was able to set some things about WEFAX that now are disappeared in the newer versions...
I have a new laptop, I installed the recent version of my GNU/Linux OS, and some options are missing.
I don't have anymore the "LPM" setting, the FIR setting nor the 4 bargraph showing START, PHASE, IMAGE... and I think also the "skip phase" is missing.?
The main problem is the "LPM" setting, because I can't set it correctly to receive Kyodo News from Japan.
Kyodo News require IOC576 with 60LPM and I can't set it
What I receive now is basically a half page, the other half is cut away and I can't solve this problem.
Is there some way to get back those settings for?WeFax? I think now it's unusable for KYODO NEWS decoding.?
Thank you
73 DE IW9HGS
|
Re: fldigi 4.2.06.07 posted at
On Thu, Nov 21, 2024 at 06:43 PM, Dave, W1HKJ wrote:
Fixed in 06.09
Thank you David for your warm wishes. Good health to you. Saw " Fixed in 06.09". 7300 is beautiful in digital.
|
I am running Linux Mint 22 Cinnamon and Fldigi version 4.2.06.09 and I'm running into a problem.
After a bit of operation Fldigi will lock up. When I check top it tells me Fldigi is using more than 100% CPU utilization. I have to kill and restart Fldigi.
This happened with the stable version 4.2.06 and on another Linux Mint computer. I have no problems on the Windows 11 computer.
Does anyone else have this issue and is there a way I can trouble shoot this.
I have 7.7 gig of memory and 1 Terra Byte of storage.
73, Ron NY3J
|
Re: fldigi 4.2.06.09 posted at
Notarized copy of Fldigi-4.2.06.09 for MacOS 15 is here:
|
toggle quoted message
Show quoted text
On Nov 21, 2024, at 1:41?PM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Latest changes:
commit
61d36174e96cb6c5c2d118521036b316b05fdbb2
Author: dave-w1hkj <w1hkj@...>
Date:?? Thu Nov 21 07:55:00 2024 -0500
??? alpha
commit 5b70d60ea16937ab77ed37c9deed8cbf47d6949f
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 11:04:17 2024 -0600
??? band mode
?? ?
????? * fix save/load of tx level
commit 920a1af0c717edce79bbb4a0a3597caaaf11f674
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 07:16:15 2024 -0600
??? fmt time scale
?? ?
????? * add 4, 8, 16, 24 and 48 hour scales
commit ff91d937903ce30cc825d30b6470cc37c5f6f9e4
Author: Daniel Marks <profdc9@...>
Date:?? Tue Nov 12 08:34:18 2024 -0600
??? scamp
?? ?
????? * port SCAMP from github fldigi/scamp repository
73, David, W1HKJ
Re: fldigi 4.2.06.07 posted at
Fixed in 06.09, just posted at
Hello Vlad,
Hope you are enjoying a warm fall with great DX.? I also have a
7300 at the operating position.? It is a wonderful transceiver.
David, W1HKJ
On 11/20/24 08:56, Vladimir, RW6AVK via
groups.io wrote:
toggle quoted message
Show quoted text
Hi David
?
In which version will the saving of fractional value after
the decimal point be fixed? Or has it already been fixed?
?
TNX
|
fldigi 4.2.06.09 posted at
Latest changes:
commit
61d36174e96cb6c5c2d118521036b316b05fdbb2
Author: dave-w1hkj <w1hkj@...>
Date:?? Thu Nov 21 07:55:00 2024 -0500
??? alpha
commit 5b70d60ea16937ab77ed37c9deed8cbf47d6949f
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 11:04:17 2024 -0600
??? band mode
?? ?
????? * fix save/load of tx level
commit 920a1af0c717edce79bbb4a0a3597caaaf11f674
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 07:16:15 2024 -0600
??? fmt time scale
?? ?
????? * add 4, 8, 16, 24 and 48 hour scales
commit ff91d937903ce30cc825d30b6470cc37c5f6f9e4
Author: Daniel Marks <profdc9@...>
Date:?? Tue Nov 12 08:34:18 2024 -0600
??? scamp
?? ?
????? * port SCAMP from github fldigi/scamp repository
73, David, W1HKJ
|
Re: fldigi 4.2.06.07 posted at
FLDIGI 4.2.06.07 VN Alpha running well here on Mac Mini M4 24GB.
No Microphone issue.?
Thanks Dave!
?
|
There is good support on the CHIRP group.
73
Danny, K5CG
HH 550-0609
SKCC 14257
toggle quoted message
Show quoted text
----- Original Message ----- From: "Marty Hartwell, KD8BJ via groups.io" <mhartwe@...> To: "Linuxham Mail List" < [email protected]> Sent: Wednesday, November 20, 2024 10:44:16 AM Subject: [linuxham] link to CHIRP Hi I am having a hard time updating my CHIRP (radio programing) application on my Xubuntu system. Anyone have a link I can use to download the latest version? Marty kd8bj
|
The Chirp website is?
?
73 Bryan K3BRY
|
Hi
I am having a hard time updating my CHIRP (radio programing) application on my Xubuntu system. Anyone have a link I can use to download the latest version?
Marty kd8bj
|
Re: fldigi 4.2.06.07 posted at
Hi David
?
In which version will the saving of fractional value after the decimal point be fixed? Or has it already been fixed?
?
TNX
|
What is the status of GridTracker and JS8call for use on MacOS 15? ie Signed and Notarized
All,
I am looking for signed and notarized versions of GridTracker and JS8call for use on a Mac.
I have a Mac computer with an M2 chip currently running MacOS 14. Since Apple is requiring Apps to be signed and notarized before they can be opened on MacOS 15, I am holding off a bit on upgrading to MacOS 15.
I have already been able to download Flrig, Fldigi, Flarq, and WSJT-X that will work on MacOS15.
I am looking for GridTracker that will work on MacOS 15 before I take the plunge and upgrade to it.
I use Fldigi to control my radio, then WXJT-X (or Fldigi or JS8call), then feed that into GridTracker2 with the output of GridTracker2 going into RUMlogNG, my logging program.
RUMlogNG is already in the Apple App store.
So I am looking for GridTracker and JS8call. GridTracker being a higher priority at this point for me.
Does anyone have any information about these two programs re MacOS 15??
Thanks,
Philip
AC4O
|
Re: fldigi 4.2.06.07 posted at
Gary, Thanks for the zip files of flirig and fldigi apps that will work on MaxOS 15. I understand that David is the key person in all this and I really appreciate his efforts. I know that Apple does not make it easy. I appreciate your efforts to assist in this. Per your note, I have downloaded the WSJT-X Improved apps as well.? The Ham Radio programs are the programs I use most, and I do like my Mac computer. I will try and hold out until a signed and Notarized GridTracker is available before I upgrade to the MacOS 15 though. I will reach out about GridTracker and JS8call. Thanks again, Cheers, Philip
toggle quoted message
Show quoted text
On Nov 19, 2024, at 2:19?PM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Philip, latest version of Flrig (that I have) is here:
|
I should state that I am just signing and notarizing the Fldigi apps that have already been compiled by David until he can get his Apple Developer ID.
WSJT-X_Improved apps that are notarized and compiled for Apple chips can be found at:
Look for the files that end in M1.zip. The Plus version is most like WSJT-X in terms of layout. AL_Plus is optimized for laptops (which is what I use) and Widescreen is optimized for large monitors.
For JS8Call and Gridtracker, I would approach their developers directly. Both programs are on?. I¡¯m willing to help out but don¡¯t want to get crosswise with those developers.
On Nov 19, 2024, at 12:37?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:
Gary,Hello. I was very happy to see your email.
I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the ¡°side loading¡± issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?
Is there anything I can do to help??
Thanks,
Philip
AC4O
On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
?????Should only require a single response to the "use microphone" dialog.
Re: DigiRig, flrig, and a Yaesu FT-747GX
I still have not gotten FLRig to communicate with my radio
?Turn off all other serial
access to the transceiver/digirig before starting and
configuraing flrig.? Suggest rebooting the computer before
starting flrig.
- reboot computer
- turn on transceiver
- start flrig
- configure flrig
- start WSJT-X and set up
to use "flrig" as the transceiver interface
- start JS8Call and
configure similar to WSJT-X
The will allow fldigi,
JS8Call, and WSJT-X to operate simultaneously, all with
transceiver control via flrig.
73, David, W1HKJ
On 11/16/24 09:13, Riley Gossling,
KF0QMQ via wrote:
Yeah the strangest thing is that I have cat control through
JS8Call and WSJT-X working fine?
|
Re: fldigi 4.2.06.07 posted at
Philip, latest version of Flrig (that I have) is here:
|
I should state that I am just signing and notarizing the Fldigi apps that have already been compiled by David until he can get his Apple Developer ID.
WSJT-X_Improved apps that are notarized and compiled for Apple chips can be found at:
Look for the files that end in M1.zip. The Plus version is most like WSJT-X in terms of layout. AL_Plus is optimized for laptops (which is what I use) and Widescreen is optimized for large monitors.
For JS8Call and Gridtracker, I would approach their developers directly. Both programs are on?. I¡¯m willing to help out but don¡¯t want to get crosswise with those developers.
toggle quoted message
Show quoted text
On Nov 19, 2024, at 12:37?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:
Gary,Hello. I was very happy to see your email.
I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the ¡°side loading¡± issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?
Is there anything I can do to help??
Thanks,
Philip
AC4O
On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:
Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:
On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:
Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour
<BkQDYSNrQiHSpWo5.png>
? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
?????Should only require a single response to the "use microphone" dialog.
Re: flamp not connecting to fldigi
Try this, see if there is another process using the default local address. I do not know if the 127.0.02 address is used by your system you may need to change it to something else.
#!/bin/bash
CMDS="--arq-server-address 127.0.0.2 --XMLRPC-server-address 127.0.0.2"
FLDIGI $CMDS &
sleep 4
FLAMP $CMDS &
|
Dave, W1HKJ
Asbesto, IW9HGS
Ron NY3J
Danny K5CG
