I am setting up fldigi and wstj-x for a friend on his Windows 10 computer connected to an IC-7100. I can't get fldigi to work correctly.
- fldigi is using flrig as its rig control. The controls on flrig seems to work correctly based on 7100 indicators.
- flrig shows no s meter level.
- There is no fldigi decode and a weak looking waterfall. The sound from the IC-7100 speaker appears to be as expected for PSK31. I tried several bands with the same result.
- With a power out setting of 20 watts on flrig the power meter reads 2 watts using fldigi a CQ transmission. No matter the power setting on flrig, the power out is 10% of the setting.
By comparison, WSTJ-X works, decodes etc with the same rig and sound card settings. It is and IC-7100, flrig-2.0.04, fldigi-4.2.03, Windows 10; I'm a Linux not Windows person so I'm struggling with the OS but with WSTJ-X working I suspect an issue with the "fls". What tools are available to diagnose this in Windows 10?
|
Re: Sibtx v3, the open source Hybrid SDR is released
Very nicely done Sir's.
73.
Dave G0WBX.
--
Sent from a MicroSoft free zone:
|
Re: DE19 + Quadra + WSJTX = PROBLEMS
helped a friend with the same issue open alasmixer, select the de19 and unmute it
|
Sibtx v3, the open source Hybrid SDR is released
As some in this group may know, that I have been working on an open source SDR that uses FLDigi in the backend. The sBitx is based on the Raspberry Pi.? The v3 version of the software works even on the Raspberry Zero 2W that costs just $15. It offers many features including N1MM style logging, FT8, CW and supports on-board FLDigi. You can view the source code and the circuit at?, the manual is available on? The interesting part is that I took a different route and implement the SDR using convolution method. I have detailed?this approach on my website at? Here is a video of the sbitx running FT8? Here is a video of the sbitx running CW with?macros, logging, decoding, etc
|
Re: First Post !!! FLDIGI on Raspberry Pi 400
Like that quote !!! As a retired ee i can relate.
|
Re: DE19 + Quadra + WSJTX = PROBLEMS
I used the DE-19 with a Raspberry PI and its version of Ubuntu Linux without any problems. The issue for you may be BRITTY service. BRITTY takes over modem device (cell phone or modem). You may need to disable the BRITTY service. Use dmesg to see if this is happening. If it is then a Internet search for "disable linux britty" should give you the instructions to disable or remove britty.
Enjoy Life, Greg
Live Well, Laugh Often, Love Much
toggle quoted message
Show quoted text
On 12/13/2023 23:48, Bo, W4GHV wrote: I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,
|
Re: First Post !!! FLDIGI on Raspberry Pi 400
Yes, but the dialog shown on StackExchange shows a submenu. First choose 6 the advanced menu, then A6 for the Wayland to X11 conversion...
Then after the X11 setting is active do a reboot and then in a terminal do: sudo apt update && sudo apt dist-upgrade
in order to install all the missing things for X11.
Log off/log on or reboot.
If you did any settings for the Upper screen bar in Wayland:
They will all be lost and you end up with an empty bar.
73,
Peter - PA0PJE
Op 2023-12-13 om 18:08 schreef WF5W:
toggle quoted message
Show quoted text
I second the motion to not use wayland yet.
As bad as X11 is code wise. It just works well for the user.
see this link for how to do that:
extremely easy.
Jerry
----
Extra Ham Radio Operator: WF5W
Registered Linu=x User: 275424
3D CAD designer
The most exciting phrase to hear in science - the one that heralds new
discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov
On Wed, Dec 13, 2023 at 8:19?AM Cliff, AE5ZA <ae5zaham@...> wrote:
The issue is Xwayland. Go back to the last version it runs great with
fldigi etc. Been doing it for years. Xwayland is *not* ready for prime
time on the Pi. I'm running 64bit PiOS on my Pi-400. I also have an install
of Manjaro which runs great as well on the Pi-400. It's very similar to
PiOS, but a bit more refined interface.
73,
Cliff, AE5ZA
On Dec 13, 2023, at 07:30, sdegroff, W8SRD via groups.io <
sdegroff@...> wrote:
Weell. The saga continues...
Installed Ubuntu on ssd. Still slow. Xwayland still hogs cpu.
Then wrote over ubuntu with pi-os. Still same. Xwayland hogging cpu. I
guess I'm about done trying to run fldigi on pi 4.
Will run only wsjtx on it and still run fldigi on lap top(s). Thanks for
your help.
73
W8SRD
|
Re: DE19 + Quadra + WSJTX = PROBLEMS
I found the DE19 does not work with Linux. I resorted to the CE 19 and soundcard,
|
Quadra Armbian audio help
Noted this is the Win fldigi group. Is there a Linux group?
Whoops. I found it and will post there.
Anyhow, a simple question for Linux fans.
fldigi displays the audio connections of the top picture. It does not work.?
Wsjtx, js8call show what's in the second picture. And WORKS.
System is a quadra Armbian 64 bit ?Linux system
 
--?
73, Bo W4GHV since '54
|
Re: First Post !!! FLDIGI on Raspberry Pi 400
I second the motion to not use wayland yet. As bad as X11 is code wise. It just works well for the user.
see this link for how to do that:
extremely easy.
Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer
The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov
On Wed, Dec 13, 2023 at 8:19?AM Cliff, AE5ZA < ae5zaham@...> wrote: The issue is Xwayland. Go back to the last version it runs great with fldigi etc. Been doing it for years. Xwayland is not ready for prime time on the Pi. I'm running 64bit PiOS on my Pi-400. I also have an install of Manjaro which runs great as well on the Pi-400. It's very similar to PiOS, but a bit more refined interface.
On Dec 13, 2023, at 07:30, sdegroff, W8SRD via < sdegroff@...> wrote:
Weell. The saga continues...
Installed Ubuntu on ssd. Still slow.? Xwayland still hogs cpu.
Then wrote over ubuntu with pi-os. Still same.? Xwayland hogging cpu.? I guess I'm about done trying to run fldigi on pi 4.
Will run only wsjtx on it and still run fldigi on lap top(s).? Thanks for your help.
73
W8SRD
|
Re: First Post !!! FLDIGI on Raspberry Pi 400
The issue is Xwayland. Go back to the last version it runs great with fldigi etc. Been doing it for years. Xwayland is not ready for prime time on the Pi. I'm running 64bit PiOS on my Pi-400. I also have an install of Manjaro which runs great as well on the Pi-400. It's very similar to PiOS, but a bit more refined interface.
toggle quoted message
Show quoted text
On Dec 13, 2023, at 07:30, sdegroff, W8SRD via < sdegroff@...> wrote:
Weell. The saga continues...
Installed Ubuntu on ssd. Still slow.? Xwayland still hogs cpu.
Then wrote over ubuntu with pi-os. Still same.? Xwayland hogging cpu.? I guess I'm about done trying to run fldigi on pi 4.
Will run only wsjtx on it and still run fldigi on lap top(s).? Thanks for your help.
73
W8SRD
|
Re: First Post !!! FLDIGI on Raspberry Pi 400
Weell. The saga continues...
Installed Ubuntu on ssd. Still slow.? Xwayland still hogs cpu.
Then wrote over ubuntu with pi-os. Still same.? Xwayland hogging cpu.? I guess I'm about done trying to run fldigi on pi 4.
Will run only wsjtx on it and still run fldigi on lap top(s).? Thanks for your help.
73
W8SRD
|
Re: callook.info on flnet
Thanks for the heads up Cliff.? I will install the update and let you know.??
I wasn't aware it was USA calls only, but for the nets I use it on, that is no problem.
73
Mark Gregory AB9ZA
On Mon, Dec 11, 2023, 10:58 PM Cliff, AE5ZA < ae5zaham@...> wrote: Mark, Dave's fixed it. Give version 7.5.0.13 a go. Go to ?and grab the file you need. I assume you know ?only contains USA call signs.
Cliff,
Thanks for the update.
Mark Gregory AB9ZA On Mon, Dec 11, 2023, 6:24 PM Cliff, AE5ZA < ae5zaham@...> wrote: Mark,
Yes, it doesn't work in flnet. Dave made some change to the lookup in fldigi so it works there, but it needs to be fixed in flnet. I'll let him know and hopefully he'll get it before too long.
I have been using??for call sign lookup in flnet, which works fine but isn't updated regularly.? So new call signs have to be entered manually.? I recently ran across??and I see it is an option in flnet.? After selecting it, flnet doesn't find info on any call sign.? Is there a special setup I need to do to make it work?
Mark AB9ZA
|
Re: callook.info on flnet
Mark, Dave's fixed it. Give version 7.5.0.13 a go. Go to ?and grab the file you need. I assume you know ?only contains USA call signs.
toggle quoted message
Show quoted text
Cliff,
Thanks for the update.
Mark Gregory AB9ZA On Mon, Dec 11, 2023, 6:24 PM Cliff, AE5ZA < ae5zaham@...> wrote: Mark,
Yes, it doesn't work in flnet. Dave made some change to the lookup in fldigi so it works there, but it needs to be fixed in flnet. I'll let him know and hopefully he'll get it before too long.
I have been using??for call sign lookup in flnet, which works fine but isn't updated regularly.? So new call signs have to be entered manually.? I recently ran across??and I see it is an option in flnet.? After selecting it, flnet doesn't find info on any call sign.? Is there a special setup I need to do to make it work?
Mark AB9ZA
|
CTY-3341 Country Files - 12 December 2023
The Country (CTY) Files were updated on 12 December 2023:
For installation instructions, start at:
Hover your mouse over the word Contest in the menu, then select the
software you are using.
To install the file, follow the link to your software at the top of the page.
If you are interested in a bigger CTY.DAT for everyday logging, you can get
it here:
Note that the release notes (and Version Entity) for this larger file are
different than what is shown below. There is a separate link to them.
As a reminder, there is an RSS feed of the latest country file announcements:
Here are the release notes:
12 December 2023 (CTY-3341)
VER20231212, Version entity is Alaska, KL
Added/changed Entities/Prefixes/Callsigns:
* 7O2WX is Yemen, 7O in CQ zone 37, ITU zone 48
* F4IGB/TRC is France, F
* TO5M is St. Martin, FS
* GB5ANT is Wales, GW
* KC9WIB is Hawaii, KH6
* K7DN and KK6IQC are both Alaska, KL
* LU1IG/I is Argentina, LU
* UG4I is in ITU zone 29, not ITU zone 30
* UA4FMQ/P is Asiatic Russia, UA9 in CQ zone 19, ITU zone 33
Removed Entities/Prefixes/Callsigns:
* TO8FH in Mayotte, FH
* GB0FFS, GB0GDS and GB6WLS in Scotland, GM
* GB2GFS in Wales, GW
* IK6FAW/J and IQ5AE/J in Italy, I
* IQ0SS/P in Sardinia, IS
* K7DWJ in Hawaii, KH6
* KP2H in Puerto Rico, KP4
* LU3YZ/Y, LU4HCH/H and LW6EGE/V in Argentina, LU
* LX9S/J in Luxembourg, LX
* PA1AW/J, PC6RH/J, PE1NIL/J, PI4CQ/J and PI4SHV/J in Netherlands, PA
* SV2JAO/J and SX2IMA/J in Greece, SV
* R0CM/4, R75AAR, R8FF/3, RC9WD/6, RN2F/1 and UA4FMQ/P in European Russia, UA
* R2ET/9 and R5AF/0 in Asiatic Russia, UA9
Though I am subscribed to this reflector so that I can make these
announcements, I do not see most messages posted to it. If you have
any comments or corrections to the country file, please contact me
directly.
73 - Jim AD1C
--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>,
|
Re: callook.info on flnet
Cliff,
Thanks for the update.
Mark Gregory AB9ZA
On Mon, Dec 11, 2023, 6:24 PM Cliff, AE5ZA < ae5zaham@...> wrote: Mark,
Yes, it doesn't work in flnet. Dave made some change to the lookup in fldigi so it works there, but it needs to be fixed in flnet. I'll let him know and hopefully he'll get it before too long.
I have been using for call sign lookup in flnet, which works fine but isn't updated regularly.? So new call signs have to be entered manually.? I recently ran across and I see it is an option in flnet.? After selecting it, flnet doesn't find info on any call sign.? Is there a special setup I need to do to make it work?
Mark AB9ZA
|
Re: callook.info on flnet
Mark,
Yes, it doesn't work in flnet. Dave made some change to the lookup in fldigi so it works there, but it needs to be fixed in flnet. I'll let him know and hopefully he'll get it before too long.
toggle quoted message
Show quoted text
I have been using for call sign lookup in flnet, which works fine but isn't updated regularly.? So new call signs have to be entered manually.? I recently ran across and I see it is an option in flnet.? After selecting it, flnet doesn't find info on any call sign.? Is there a special setup I need to do to make it work?
Mark AB9ZA
|
I have been using hamqth.com for call sign lookup in flnet, which works fine but isn't updated regularly.? So new call signs have to be entered manually.? I recently ran across and I see it is an option in flnet.? After selecting it, flnet doesn't find info on any call sign.? Is there a special setup I need to do to make it work?
Mark AB9ZA
|
Re: flrig 2.0.04.17 development test release
All test builds completed for Fedora and EPEL:
Thanks, Richard KF5OIM
|
flrig 2.0.04.17 development test release
at
Index of /alpha/flrig
Date: Sat Dec 9 11:01:00 2023 -0600
alpha
qmx12
* update to AG get/set
* update to MD get/set
Documentation Overhaul
* Change document structure
* Add missing elements
* Change xcvr naming for consistency in a product line
* Update documentation source and source files as required
. add missing transceivers
. organize help files to generate a manual more easily
searched and used by first time users
* edited by Cliff Scott, AE5ZA, and David Freese, W1HKJ
...
73, David, W1HKJ
|
Bruce W4BRU
Greg Majewski, KD1XI
Peter PA0PJE
Bo, W4GHV
Richard Shaw, KF5OIM
Dave, W1HKJ