开云体育

Unfortunately that does not work on some machines.? My MacAir with an M2 and Sonoma does the same thing.? This appears to be a change in the microphone security policy.? Totally anal. I am

You need to grant FLDigi access to the mic through the security control panel. I'm not in front of my machine to give you the steps. [email protected]> wrote:

I downloaded 4.2.05 on my Mac M1 (Sonoma 14.4.1) today and when I go to open it I keep receiving a dialog box asking for permission to access the microphone. ?When I click allow the dialog box just

posted at http://www.w1hkj.com/files/xmls/elecraft/ and at https://sourceforge.net/projects/fldigi/files/xmls/elecraft/ Corrects bandwidth selections. Thank you Mike, W9MDB. 73, David, W1HKJ

Hi David Sorry, forget to said my work on MS Window 10. Yip VR2VRC

Hi. Fldigi ver4.2.05 successfully built and running here on LMDE 5 64 bit, all OK. I still see, that I can't see the rx IMD figures for PSK modes other than PSK31. For all the higher PSK modes (PSK61

Repeating what Joel Black just told y'all. Open the MacOS /Finder / Press and hold the Cmd key Press and hold the Shift key Press the period '.' key Your Finder window should now show hidden files and

VR2VRC

If you execute the following: CMD+SHIFT+. (hold them all down at the same time) you will display hidden files on a Mac. That is CMD+SHIFT+[period] in case that “.” is ambiguous. You can issue the

Thanks for the suggestion, David. I've done a few very minor things in Terminal, but I'm not real experienced at all. I tried just entering what you did, but couldn't get past the second line. I don't

Yes, I've tried them both. Neither will open. Interestingly, FLAMP and FLMSG will both open, but not FLDIGI.

The VN dmg is built on a Mac mini / M2 / 14.4.1, and then tested on a Mac mini / i7 / 14.4.1.? It should run OK on an M1 based machine. Open a terminal window: $ cd $ ls -a look for hidden folder

I've been trying for days to get FLDIGI to work on my M1 Mac running Sonoma 14.4.1. But when I try to open it, it closes immediately. Does anyone have a solution? Thanks!

GD. I really like FLdigi. Tell me, is it possible to add to the Settings menu item “send QSO via the UDP (or TCP)? protocol to an external IP server”, as is done, for example, in WSJT-X.

posted to Source Forge, and http://www.w1hkj.com/files/fldigi/ Index of /files/fldigi * Parent Directory <http://www.w1hkj.com/files/> * AppleAudioCodec.html

I ran FLRIG from the terminal. It initially followed the rig's tuning, but when I tuned the rig to exactly 14.200.00, it disagreed. This is repeatable At 14.200.00. It doesn't do that at frequencies

The Country (CTY) Files were updated on 20 April 2024: https://www.country-files.com/cty-3414-20-april-2024/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse

I was just about to settle down and look at a problem I was having with filter width displays on IC-705. Then this came in, so I recompiled flrig with the latest alpha. The problems I had have gone

at http://www.w1hkj.com/alpha/flrig/ * flrig-2.0.05.45.tar.gz <http://www.w1hkj.com/alpha/flrig/flrig-2.0.05.45.tar.gz> * flrig-2.0.05.45_LI.dmg

Steve, Substitute the attached two files for the ones of the same name in the flrig source tree.? Rebuild and then run from a command line terminal. Test: Read/Set VFO A ????? Read/Set VFO B