开云体育

help! PCBs arrived from fabrication but connectors are screwed up!

Fabio Varesano All Messages By This Member #8642 Hi there, I just received the PCBs from fabrication.. unfortunately I have a design flaw.. As I used SIL-6 & SIL-14 they have 0.032" drill holes which don't fit regular 0.1" square pin arrays which would require a 0.04" drill hole. Are those footprints wrong? Or if not, what kind of connector should I use with them? Thank you, Fabio Varesano
Robert All Messages By This Member #8643 With pin headers you need to use modules from the pin_array library. Regards, Robert. toggle quoted message Show quoted text On 24/01/2011 11:45, Fabio Varesano wrote: Hi there, I just received the PCBs from fabrication.. unfortunately I have a design flaw.. As I used SIL-6& SIL-14 they have 0.032" drill holes which don't fit regular 0.1" square pin arrays which would require a 0.04" drill hole. Are those footprints wrong? Or if not, what kind of connector should I use with them? Thank you, Fabio Varesano ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at ! Groups Links --- avast! Antivirus: Inbound message clean. Virus Database (VPS): 110123-1, 23/01/2011 Tested on: 24/01/2011 11:47:40 avast! - copyright (c) 1988-2011 AVAST Software. -- () Plain text email - safe, readable, inclusive. /\
n1ist All Messages By This Member #8648 The pin-array ones are OK; the ribbon headers (both right angle and vertical) are wrong too, I just made my own copies, fixed the holes, and renamed them. /mike toggle quoted message Show quoted text --- In kicad-users@..., Robert <birmingham_spider@...> wrote: With pin headers you need to use modules from the pin_array library. Regards, Robert. On 24/01/2011 11:45, Fabio Varesano wrote: Hi there, I just received the PCBs from fabrication.. unfortunately I have a design flaw.. As I used SIL-6& SIL-14 they have 0.032" drill holes which don't fit regular 0.1" square pin arrays which would require a 0.04" drill hole. Are those footprints wrong? Or if not, what kind of connector should I use with them? Thank you, Fabio Varesano ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at ! Groups Links --- avast! Antivirus: Inbound message clean. Virus Database (VPS): 110123-1, 23/01/2011 Tested on: 24/01/2011 11:47:40 avast! - copyright (c) 1988-2011 AVAST Software. -- () Plain text email - safe, readable, inclusive. /\

Previous Topic Next Topic