开云体育

hey everyone, does anyone have a link to where i can find the sparkfun eagle library converted to kicad? i know i've seen it on the web before, and downloaded it on another computer, but i can't for

Slightly confused about what you are asking.... If you want to add another layout to the board file, so that you can place multiple boards onto one PCB, maybe to get a better deal with production then

Ok .. if I start a board with an existing schematic, then want to add to the schematic and the board layout .. how do I do that .. do I use the append in the board editor? Randy

Sometimes I would like to know center-to-center spacing, and finding the center of an object takes an extra step (or two). Also, if the distance you care about is non-orthogonal you have to run the

Many thanks for the explanation and your time! -- Dio

Sorry about that. Maybe this will help: The "pin properties" within the module definition says "There is nothing connected INSIDE of the module." The "No Connect" on the schematic says "There is no

Thanks Yves for your response, First => I do have the same print layers selected that are the Gerbers were loaded onto. Second 2 => Page Format is 8.5x11" (usually called 'A' I think). For

Yes, this's works prefectly instead the "pin properties" one. This is why I thinked to a bug. Thanks anyway. -- Rollo

Hello Jim, First => Did you select the layer to print ? Second => Select also a page format (i.e. A4) in Preferences/Options/Display not to have your pic cut in the upper left corner. You can also

When printing loaded layers from the Gerber Viewer, the layer images are not printing (neither on the print preview) or the actual print output. I am having difficulty figuring this out. Printing from

In eeschema, choose the 'X' function in the right hand tool menu. Then place the 'X' on a pin to declare it a "no connect". ... Jim H.

Feature measurement is very important (of course). I have found the dx, dy facility in KiCad to be very nice (even maybe optimal). Press the space bar to mark a reference position anywhere. Then move

Very nice! ...I needed that. ...Jim H.

Hi, is it possible to change the default path to the component documentation? Reason: I want to make my own KiCad libs and have already a .pdf document structure on a network share. Regards R??diger

Red == Front (ie Top) Green == Back (ie Bottom) You can rename these layers in Design Rules...Layers Setup. The colours are package-dependent; there is no standard across PCB packages that I have

Hello Dan. Mmmmh. I have a problem to make this connection for busses. Global Labels and hierarchical pins seems to be working. But no Bus at a hierarchical Pin....this leads to no airwires, no

*1) *So my first question is about the layers of PCBnew because usually in that kind of software the *Top layer is green* and the *Bottom layer is red* . I followed the tutorial that i attached.

Yes! Reverting from the latest build to whats in the Ubuntu 10.10 distribution solved hierarchical schematics. Watch out, hierarchical schematics function seems to be broken! //Dan, M0DFI

Hmmm, Interesting! I can't open my old hieararchical sheets? Might there be a bug, or is there a definitive no-no regarding backward compatibility? //Dan, M0DFI

Hello Charles. Thank you. I fear, i did not understand this. I named the labels of the Bus (2 wires, just for testing) Leit0 and Leit1 (both ending with a Number) and lead them into the Bus. Then i