Keyboard Shortcuts
Likes
- K-Bar-A
- Messages
Search
|
Re: HF radio and ACFI Breakers
Daniel J Mattingly, N0FQN
开云体育Here's an article from the ARRL addressing ACFI breakers. Not sure if it will help. They keep coming up with more dumb stuff claiming it's for your safety. More like it's for your money.
73 Dan N0FQN On 9/5/2021 3:54 PM, Michael F Pearson,
KJ7VXX wrote:
So I have found out that my house has 4 ACFI Breakers for Eaton that are susceptible to RF interference. I have sent an email to Eaton to see if they have a suitable replacement. What other things can I try? What are some acceptable grounding practices I should put in place to reduce RFI? |
|
HF radio and ACFI Breakers
So I have found out that my house has 4 ACFI Breakers for Eaton that are susceptible to RF interference. I have sent an email to Eaton to see if they have a suitable replacement. What other things can I try? What are some acceptable grounding practices I should put in place to reduce RFI?
Current set up is a Yaesu FT-890 (borrowing from Al, thank you), 20Meter Dipole antenna handing off the side of my house.? I see there is a grounding pin on the back of the radio that could be attached to something??? I also tired to find my houses grounding rod near the power meter to no avail, so I don't know how the house is bonded to ground (maybe water pipe?).? Any suggestions would be appreciated.? -- Mike Pearson KJ7VXX |
|
Re: Introduction to WINLINK
Count me in today! On Wed, Sep 1, 2021 at 1:31 PM DAVID L BELL, N2RSN <N2rsn@...> wrote:
|
|
Introduction to WINLINK
? Hello all, ??????????????? We are hosting another introduction to Winlink Zoom meeting? All are welcome to join the meeting. Saturday Sept 4th at 4 PM (1600 L hrs) ??????????????? The object is to introduce the function and uses of WINLINK and get some sessions scheduled following for actual set up and operations. Please sign in with your name and call sign to the following link: ?????????????????????????????????? ? Please address any questions to:? David Bell N2RSN?? KBARA BOARD MEMBER |
|
Re: The Tech Net Tonight
开云体育About I am hearing is ground wave.? WO7V, AG7FR, weak signal from a others. David N2RSN ? ? From: [email protected] <[email protected]> On Behalf Of Dennis Worden, N7DHW
Sent: August 30, 2021 20:05 To: [email protected] Subject: Re: [k-bar-a] The Tech Net Tonight ? couldn't hear a word out in Sprague. ? On 8/30/2021 17:02, Jim English, WO7V wrote:
|
|
Re: The Tech Net Tonight
Dennis Worden, N7DHW
toggle quoted message
Show quoted text
|
|
Re: Introduction to WINLINK
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> on behalf of DAVID L BELL, N2RSN <N2rsn@...>
Sent: Friday, August 27, 2021 2:58:36 PM To: [email protected] <[email protected]> Subject: Re: [k-bar-a] Introduction to WINLINK ?
Time for the meeting is? Saturday 4 PM? (1600 hrs) ? From: [email protected] <[email protected]> On Behalf Of
DAVID L BELL, N2RSN ? ? Hello all, ??????????????? We are hosting an introduction to Winlink Zoom Meeting tomorrow.? All are welcome to join the meeting. ??????????????? The object is to introduce the function and uses of WINLINK and get some sessions scheduled following for actual set up and operations. Please sign in with your name and call sign to the following link: ??????????????? ?????????????????? ? Please address any questions to? w7vw-10@... David Bell N2RSN?? KBARA BOARD MEMBER |
|
The Tech Net Tonight
Hello Everybody, Tonight? K-BAR-A in Klamath Falls will hold their second Tech Net.? This net is for everybody but specifically?those local hams that hold a technician class license.? On 10m they are allowed to operate SSB on the frequency that the net is operating; 28.375MHz at 20:00 (8:00 pm) local time.? Tonight we will be discussing some of the interesting?and obscure?aspects of the amateur radio service hobby.? 73, Jim WO7V |
|
Re: Introduction to WINLINK
开云体育Time for the meeting is? Saturday 4 PM? (1600 hrs) ? From: [email protected] <[email protected]> On Behalf Of DAVID L BELL, N2RSN
Sent: August 27, 2021 12:04 To: [email protected] Subject: [k-bar-a] Introduction to WINLINK ? ? Hello all, ??????????????? We are hosting an introduction to Winlink Zoom Meeting tomorrow.? All are welcome to join the meeting. ??????????????? The object is to introduce the function and uses of WINLINK and get some sessions scheduled following for actual set up and operations. Please sign in with your name and call sign to the following link: ??????????????? ?????????????????? ? Please address any questions to? w7vw-10@... David Bell N2RSN?? KBARA BOARD MEMBER |
|
Introduction to WINLINK
? Hello all, ??????????????? We are hosting an introduction to Winlink Zoom Meeting tomorrow.? All are welcome to join the meeting. Saturday 4 PM (1600) ??????????????? The object is to introduce the function and uses of WINLINK and get some sessions scheduled following for actual set up and operations. Please sign in with your name and call sign to the following link: ??????????????? ?????????????????? ? Please address any questions to? w7vw-10@... David Bell N2RSN?? KBARA BOARD MEMBER |
|
Re: The K-BAR-A tech net.
Daniel J Mattingly, N0FQN
开云体育I will reiterate what Dave, N2RSN, stated. Getting a "cheap" rig
is near impossible these days. And, this holds true for many
hobbies. A IC-718, TS-430, FT-857, FT-897 and, several others, are
fine 160 to 10 meters rigs. there's quit a list of used rigs to
fit your budget. You have to look for them and, when found, jump
on it. They won't last more than a couple of hours at best. If
possible there are several models with built-in or attachable auto
tuners. A manual tuner is cheaper in some cases. After 40 years in
the hobby and, having my own shop. I've refurbished, repaired more
rigs than I care to mention. I only bring this up if you want the
rig you choose to be tested. I have a full bench more than capable
of testing it for you for no charge. Many older rigs will need
more TLC than the newer ones. Parts change value over the years. I
just finished aligning a IC-7600 that's not that old but, it was
out of tolerance. I'm more of a tech guy. I get my thrill watching
the needle rise, as they say. And, my bench is never clean. Think
about why. My days are getting numbered at 73 years of age. I
can't do the new SMT. Even with the binocular scope and soldering
equipment it's become way too, small and crowded for me. As far as antennas go, you're going to have a tough time with an HOA. As we hams know, they think they own you and, your property. You may get a OFC antenna up and they won't mind. I suspect otherwise but, hope for the best. I'm trying to be realistic and not rain on your parade. Depending on how adamant the HOA is, you may end up going mobile HF. I know of several hams in your situation that did just that. It's a bummer to have to go out to your vehicle in the winter to talk on HF but, it is what it is. We hams are here to help. Any advice or help you need just give a
shout. 73 Dan N0FQN On 8/17/2021 8:15 AM, Michael F
Pearson, KJ7VXX wrote:
I would love to join. Any suggestions?on a 10M rig that is inexpensive and HOA?/ Wife approved antenna. I only have 2M radios currently.? |
|
Re: The K-BAR-A tech net.
开云体育Good Morning Michael, ??????????????? I am happy to see you asking for inputs and as things develop you will see many opinions.? ??????????????? My first suggestion is not to get JUST a 10 M rig, there are some out there but will only be in the outdated used market, and when you get your general ticket it will sit on the bench not ?used for a few more years until the bands open up more. ??????????????? Second suggestion to ?look around for a second hand 100 watt rig such as an IC-718, and have another HAM friend help you proof it before you buy.? The IC-718 has been around for ever and is still on the production line and sells new for around $600.00 so watch for over priced used ones. ??????????????? Third suggestion you can make a 10M dipole for near nothing and is only just under 17 feet long and can be very wife/HOA friendly with optional configurations.? With a resonant antenna you will not need a tuner at this point. ? Here to help David N2RSN?? n2rsn@... ? ??????????????? ? From: [email protected] <[email protected]> On Behalf Of Michael F Pearson, KJ7VXX
Sent: August 17, 2021 08:16 To: [email protected] Subject: Re: [k-bar-a] The K-BAR-A tech net. ? I would love to join. Any suggestions?on a 10M rig that is inexpensive and HOA?/ Wife approved antenna. I only have 2M radios currently.? ? My intent is to get an ICOM (or something) and build an offset Dipole or test out my Rain Gutter Antenna idea, once I have some free cash. Hoping to make General before the end of the year.? ? Michael Pearson KJ7VXX |
|
Re: The K-BAR-A tech net.
I would love to join. Any suggestions?on a 10M rig that is inexpensive and HOA?/ Wife approved antenna. I only have 2M radios currently.?
?
My intent is to get an ICOM (or something) and build an offset Dipole or test out my Rain Gutter Antenna idea, once I have some free cash. Hoping to make General before the end of the year.? ?
Michael Pearson
KJ7VXX
|
|
Re: The K-BAR-A tech net.
Thank you, Jim, for hosting the net tonight!! Jordan KD7JJJ? On Mon, Aug 16, 2021 at 7:42 PM Jim English, WO7V <jamesdenglish@...> wrote:
|
|
Re: The K-BAR-A tech net.
开云体育Well I missed the notice. Give me a chance to figure out my HF radio and get it on and dialed in and I'll join you.? Lisa * The rules are a good place to hide if you don't have a better idea and the talent to execute it. -------- Original message -------- From: "Jim English, WO7V" <jamesdenglish@...> Date: 8/16/2021 7:41 PM (GMT-08:00) To: K-BAR-A W7VW <[email protected]> Subject: [k-bar-a] The K-BAR-A tech net. Hello Everybody,
Well all you techs.? Let's try the first tech net tonight 28.375MHz at 20:00 hours local time; that would be 8:00 pm DST to you 12 hour klutz's.?? 73, Jim WO7V - " |
|
Re: The K-BAR-A tech net.
开云体育I’ll be there David n2rsn ? From: [email protected] <[email protected]> On Behalf Of Jim English, WO7V
Sent: August 16, 2021 19:42 To: K-BAR-A W7VW <[email protected]> Subject: [k-bar-a] The K-BAR-A tech net. ? Hello Everybody, ? Well all you techs.? Let's try the first tech net tonight 28.375MHz at 20:00 hours local time; that would be 8:00 pm DST to you 12 hour klutz's.?? ? 73, ? Jim WO7V |
|
Re: The Local 10m Tech net
开云体育All, I can be on it and help. ? David Bell N2RSN?? ? ? ? From: [email protected] <[email protected]> On Behalf Of Jim English, WO7V
Sent: August 16, 2021 10:56 To: K-BAR-A W7VW <[email protected]> Subject: [k-bar-a] The Local 10m Tech net ? Hello Everybody, ? When I was living in the Portland?area about 10 years ago one of the local hams held a weekly net on 10 meters.? The main purpose was to encourage the local hams that held a Tech license to get on HF.? Did you know that it is legal for a person holding a Technician class license to operate on 10 meters using? the SSB phone mode between 28.3MHz and 28.5MHz?? The discussions were mainly technical?related to some aspect of the ham radio hobby; mostly with information for persons?wanting to upgrade to General.? I was a regular participant and even though I didn't need to upgrade I found the discussions quite interesting.?? ? I was wondering if there is any interest in starting a similar net here in the Klamath Falls area?? I was thinking 8 pm local time on Mondays but am open to suggestions. ? 73, ? Jim WO7V ? |