|
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing. I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|
Thanks Rick, and all the best to your YF.
73 Gary? ?beater/tester &?
Honor Roll &? checker
I have had a number of people ask me to release an update. I have just
been lacking time due to taking care of my wife. Today I had my
Grand-daughter come sit with her so I could build an update. There are a
few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog
login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
|
Hello Rick,
I got the message to update the program, but it wont install due
to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure or
remove the? existing version of this product, use Add/Remove
programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison via
groups.io wrote:
toggle quoted message
Show quoted text
I
have had a number of people ask me to release an update. I have
just been lacking time due to taking care of my wife. Today I had
my Grand-daughter come sit with her so I could build an update.
There are a few things I was going to finish working on but this
fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News
Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu
tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party
app.
It now gives a tooltip explaining this and only takes you to the
Clublog login page.
E. Many users complained that windows were causing errors when
resizing. I have now locked the sizing of the main form to stop
this.
You should get a notice in the next 24hrs when update routine
runs.
73 Rick N2AMG
|
Hi Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files after the upload, maybe you don't remember, i aked you a long time ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
toggle quoted message
Show quoted text
-----Message d'origine----- De : [email protected] < [email protected]> De la part de Rick Ellison Envoyé : mardi 29 octobre 2024 02:52 ? : [email protected]Objet : [hamlogger] LogSync Update. I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following: v2.0.19.8 A. When LOTW is not enabled stops TQSL Update checks and News Checks. B. When LOTW is disabled hide Update TQSL Menu from Info menu tree. C. Changed LOTW URL's to log into LOTW website. D. Clublog no longer allows logging into Clublog from a 3rd party app. It now gives a tooltip explaining this and only takes you to the Clublog login page. E. Many users complained that windows were causing errors when resizing. I have now locked the sizing of the main form to stop this. You should get a notice in the next 24hrs when update routine runs. 73 Rick N2AMG -- This email has been checked for viruses by Avast antivirus software. www.avast.com
|
TO N2AMG Rick
Hello Rick,
I don't want to bother you much, because I know that your free time is very short. First of all, I want to take advantage of the fact that you and your wife's health problems get better quickly.
I just have a quick question,
I configured logger32 to automatically send e-qsl and LOTW.
For the e-qsl there is no problem, the procedure is done perfectly.
For the LOTW, the qso arrives at LOTW but it is not noted in logger32 as confirmed by LOTW as it should be. However, I did write: ''perform the flag in logger32''.
Please tell me if this function works correctly again.
73 F5JVP Didier
toggle quoted message
Show quoted text
------ Message d'origine ------ De "F4FQH Olivier via groups.io" <unit365@...> ? [email protected]Date 29/10/2024 08:37:23 Objet Re: [hamlogger] LogSync Update. Hi Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files after the upload, maybe you don't remember, i aked you a long time ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really want
to make sure copy L32Logsync.ini another directory so it is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie wrote:
Hello Rick,
I got the message to update the program, but it wont install
due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure or
remove the? existing version of this product, use Add/Remove
programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison
via groups.io wrote:
I
have had a number of people ask me to release an update. I have
just been lacking time due to taking care of my wife. Today I
had my Grand-daughter come sit with her so I could build an
update. There are a few things I was going to finish working on
but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News
Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu
tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to the
Clublog login page.
E. Many users complained that windows were causing errors when
resizing. I have now locked the sizing of the main form to stop
this.
You should get a notice in the next 24hrs when update routine
runs.
73 Rick N2AMG
|
Oliver..
Click Open LOTW setup look at the Left side first checkbox I think this is what you are looking for.
73 Rick N2AMG
toggle quoted message
Show quoted text
On 10/29/2024 3:37 AM, F4FQH Olivier via groups.io wrote: Hi Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files after the upload, maybe you don't remember, i aked you a long time ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
|
Didier..
It should work correctly I did not touch any of the code in that routine. If you would Turn Debug on and the next time you log a qso? the info should be written to the debug file. after a couple qso's you can turn Debug off and then send me the file called DebugLog.txt and results.txt Both files will be in the directory where Logsync is installed. Just send them as attachments.
73 Rick N2AMG
toggle quoted message
Show quoted text
On 10/29/2024 4:30 AM, DIDIER DIENNE wrote: TO N2AMG? Rick
Hello Rick,
I don't want to bother you much, because I know that your free time is very short. First of all, I want to take advantage of the fact that you and your wife's health problems get better quickly.
I just have a quick question,
I configured logger32 to automatically send e-qsl and LOTW.
For the e-qsl there is no problem, the procedure is done perfectly.
For the LOTW, the qso arrives at LOTW but it is not noted in logger32 as confirmed by LOTW as it should be. However, I did write: ''perform the flag in logger32''.
Please tell me if this function works correctly again.
73 F5JVP Didier
------ Message d'origine ------
De "F4FQH Olivier via groups.io" <unit365@...>
? [email protected]
Date 29/10/2024 08:37:23
Objet Re: [hamlogger] LogSync Update.
Hi? Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files after the upload, maybe you don't remember, i aked you a long time ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
|
Thanks Rick,
Uninstalled the current version via add and remove programs, went
to your website & downloaded the version listed as the latest,
& installed it. I now have version 2.0.19.8 is this the
correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison
via groups.io wrote:
toggle quoted message
Show quoted text
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really want
to make sure copy L32Logsync.ini another directory so it is
safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie
wrote:
Hello Rick,
I got the message to update the program, but it wont install
due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure or
remove the? existing version of this product, use Add/Remove
programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison
via groups.io wrote:
I
have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to finish
working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News
Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu
tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors when
resizing. I have now locked the sizing of the main form to
stop this.
You should get a notice in the next 24hrs when update routine
runs.
73 Rick N2AMG
|
I'm pretty sure it is, Ken.
Item E on Rick's update list gives the main form a letterbox shape with bank space on the right quarter, and it cannot be narrowed.? Although the double-headed arrow still appears when I click the right edge, and I can move it left or right, the edge just flickers a bit and stays in the same place.
73 Gary? ?beater/tester &?
Honor Roll &? checker
Thanks Rick,
Uninstalled the current version via add and remove programs, went
to your website & downloaded the version listed as the latest,
& installed it. I now have version 2.0.19.8 is this the
correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison
via wrote:
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really want
to make sure copy L32Logsync.ini another directory so it is
safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie
wrote:
Hello Rick,
I got the message to update the program, but it wont install
due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure or
remove the? existing version of this product, use Add/Remove
programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison
via wrote:
I
have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to finish
working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News
Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu
tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors when
resizing. I have now locked the sizing of the main form to
stop this.
You should get a notice in the next 24hrs when update routine
runs.
73 Rick N2AMG
|
Thanks Gary, It's just that when I tried to update it threw up
the message that it couldn't. So I did what Rick said but wasn't
sure if the version on his website was the latest.
73
Ken ZL4NR
On 30/10/2024 4:56 pm, ZL2iFB via
groups.io wrote:
toggle quoted message
Show quoted text
I'm pretty sure it is, Ken.
Item E on
Rick's update list gives the main form a letterbox shape
with bank space on the right quarter, and it cannot be
narrowed.? Although the double-headed arrow still appears
when I click the right edge, and I can move it left or
right, the edge just flickers a bit and stays in the same
place.
73
Gary?
?beater/tester &?
Honor Roll &? checker
Thanks Rick,
Uninstalled the current version via add and remove
programs, went to your website & downloaded the
version listed as the latest, & installed it. I now
have version 2.0.19.8 is this the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison via wrote:
Remove the current installed version and then install
the new one. It wont do anything to your settings but if
you really want to make sure copy L32Logsync.ini another
directory so it is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie wrote:
Hello Rick,
I got the message to update the program, but it wont
install due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To
configure or remove the? existing version of this
product, use Add/Remove programs on the control panel
If I do this, will I lose all my current installed
info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison via wrote:
I have had a number of people
ask me to release an update. I have just been lacking
time due to taking care of my wife. Today I had my
Grand-daughter come sit with her so I could build an
update. There are a few things I was going to finish
working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks
and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from
Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from
a 3rd party app.
It now gives a tooltip explaining this and only takes
you to the Clublog login page.
E. Many users complained that windows were causing
errors when resizing. I have now locked the sizing of
the main form to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
|
Yes it is...
On 10/29/2024 11:32 PM, Ken McVie
wrote:
toggle quoted message
Show quoted text
Thanks Rick,
Uninstalled the current version via add and remove programs,
went to your website & downloaded the version listed as the
latest, & installed it. I now have version 2.0.19.8 is this
the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison
via groups.io wrote:
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really
want to make sure copy L32Logsync.ini another directory so it
is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie
wrote:
Hello Rick,
I got the message to update the program, but it wont
install due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure
or remove the? existing version of this product, use
Add/Remove programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick
Ellison via groups.io wrote:
I
have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to
finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and
News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info
menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors
when resizing. I have now locked the sizing of the main form
to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
|
I didn't edit the website yet.. Will do that tomorrow..
73 Rick N2AMG
On 10/30/2024 12:03 AM, Ken McVie
wrote:
toggle quoted message
Show quoted text
Thanks Gary, It's just that when I tried to update it threw up
the message that it couldn't. So I did what Rick said but wasn't
sure if the version on his website was the latest.
73
Ken ZL4NR
On 30/10/2024 4:56 pm, ZL2iFB via
groups.io wrote:
I'm pretty sure it is, Ken.
Item E on
Rick's update list gives the main form a letterbox shape
with bank space on the right quarter, and it cannot be
narrowed.? Although the double-headed arrow still
appears when I click the right edge, and I can move it
left or right, the edge just flickers a bit and stays in
the same place.
73
Gary?
?beater/tester
&?
Honor Roll &?
checker
Thanks Rick,
Uninstalled the current version via add and remove
programs, went to your website & downloaded the
version listed as the latest, & installed it. I now
have version 2.0.19.8 is this the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison via
wrote:
Remove the current installed version and then install
the new one. It wont do anything to your settings but
if you really want to make sure copy L32Logsync.ini
another directory so it is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie wrote:
Hello Rick,
I got the message to update the program, but it
wont install due to the following error message--
Another version of this product is already
installed. Installation of this version cannot
continue. To configure or remove the? existing
version of this product, use Add/Remove programs on
the control panel
If I do this, will I lose all my current installed
info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison via
wrote:
I have had a number of people
ask me to release an update. I have just been
lacking time due to taking care of my wife. Today I
had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going
to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks
and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from
Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog
from a 3rd party app.
It now gives a tooltip explaining this and only
takes you to the Clublog login page.
E. Many users complained that windows were causing
errors when resizing. I have now locked the sizing
of the main form to stop this.
You should get a notice in the next 24hrs when
update routine runs.
73 Rick N2AMG
|
toggle quoted message
Show quoted text
Yes it is...
On 10/29/2024 11:32 PM, Ken McVie
wrote:
Thanks Rick,
Uninstalled the current version via add and remove programs,
went to your website & downloaded the version listed as the
latest, & installed it. I now have version 2.0.19.8 is this
the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison
via wrote:
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really
want to make sure copy L32Logsync.ini another directory so it
is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie
wrote:
Hello Rick,
I got the message to update the program, but it wont
install due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure
or remove the? existing version of this product, use
Add/Remove programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick
Ellison via wrote:
I
have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to
finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and
News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info
menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors
when resizing. I have now locked the sizing of the main form
to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
|
Bonjour Rick, merci de prendre un peu de temps pour me dépanner ... je ne peux pas lancer le mode? ''debug'' car mon PC ne veux pas enregistrer la commande? \debug
mon problème est:? par exemple cet enregistrement de QSO
Ce QSO s'enregistre bien chez LOTW?
Mais il ne ''flag'' pas la ligne ''Confirmation envoyée par LOTW
comme il le fait très bien pour e-qsl
------ Message d'origine ------
Date 30/10/2024 05:42:04
Objet Re: [hamlogger] LogSync Update.
Yes it is...
On 10/29/2024 11:32 PM, Ken McVie
wrote:
Thanks Rick,
Uninstalled the current version via add and remove programs,
went to your website & downloaded the version listed as the
latest, & installed it. I now have version 2.0.19.8 is this
the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison
via
wrote:
Remove the current installed version and then install the new
one. It wont do anything to your settings but if you really
want to make sure copy L32Logsync.ini another directory so it
is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie
wrote:
Hello Rick,
I got the message to update the program, but it wont
install due to the following error message--
Another version of this product is already installed.
Installation of this version cannot continue. To configure
or remove the? existing version of this product, use
Add/Remove programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick
Ellison via
wrote:
I
have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to
finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and
News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info
menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors
when resizing. I have now locked the sizing of the main form
to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
|
1/ Ecrivez en angalis
2/ Vérifieez ce que vous avez taper comme cible...
Bonjour Rick,
merci de prendre un peu de temps pour me dépanner ...
je ne peux pas lancer le mode? ''debug''
car mon PC ne veux pas enregistrer la commande? \debug
mon problème est:? par exemple cet enregistrement de QSO
Ce QSO s'enregistre bien chez LOTW?
Mais il ne ''flag'' pas la ligne ''Confirmation envoyée par LOTW
comme il le fait très bien pour e-qsl
toggle quoted message
Show quoted text
------ Message d'origine ------
Date 30/10/2024 05:42:04
Objet Re: [hamlogger] LogSync Update.
Thanks Rick!
73
Ken ZL4NR?
Yes it is...
On 10/29/2024 11:32 PM, Ken McVie wrote:
Thanks Rick,
Uninstalled the current version via add and remove programs, went to your website & downloaded the version listed as the latest, & installed it. I now have version 2.0.19.8 is this the correct version?
73
Ken ZL4NR
On 30/10/2024 12:12 am, Rick Ellison via wrote:
Remove the current installed version and then install the new one. It wont do anything to your settings but if you really want to make sure copy L32Logsync.ini another directory so it is safe..
73 Rick N2AMG
On 10/29/2024 2:22 AM, Ken McVie wrote:
Hello Rick,
I got the message to update the program, but it wont install due to the following error message--
Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the? existing version of this product, use Add/Remove programs on the control panel
If I do this, will I lose all my current installed info??
73
Ken ZL4NR
On 29/10/2024 2:51 pm, Rick Ellison via wrote:
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things
I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing. I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
|
Reply to N2AMG Rick
HelloRick,
thank you for taking a little time to help me out...
I can't start the ''debug'' mode
because my PC doesn't want to register the command \debug
To see doc1
my problem is: for example this QSO recording
To see doc2
ThisQSO registers well at LOTW
To see doc3
But he did not ''flag'' la line ''Confirmation envoyée par LOTW ''
As it does very well for E-QSL
Thank you
73
F5JVP
Didier
toggle quoted message
Show quoted text
------ Message d'origine ------ De "Ken McVie" <kenmcvie2@...> ? [email protected]Date 30/10/2024 05:42:04 Objet Re: [hamlogger] LogSync Update. ------ Message d'origine ------ De "Rick Ellison" <rellison@...> ? [email protected]Date 29/10/2024 12:22:59 Objet Re: [hamlogger] LogSync Update. Didier..
It should work correctly I did not touch any of the code in that routine. If you would Turn Debug on and the next time you log a qso the info should be written to the debug file. after a couple qso's you can turn Debug off and then send me the file called DebugLog.txt and results.txt Both files will be in the directory where Logsync is installed. Just send them as attachments.
73 Rick N2AMG
On 10/29/2024 4:30 AM, DIDIER DIENNE wrote:
TO N2AMG Rick
Hello Rick,
I don't want to bother you much, because I know that your free time is very short. First of all, I want to take advantage of the fact that you and your wife's health problems get better quickly.
I just have a quick question,
I configured logger32 to automatically send e-qsl and LOTW.
For the e-qsl there is no problem, the procedure is done perfectly.
For the LOTW, the qso arrives at LOTW but it is not noted in logger32 as confirmed by LOTW as it should be. However, I did write: ''perform the flag in logger32''.
Please tell me if this function works correctly again.
73 F5JVP Didier
------ Message d'origine ------
De "F4FQH Olivier via groups.io" <unit365@...>
? [email protected]
Date 29/10/2024 08:37:23
Objet Re: [hamlogger] LogSync Update.
Hi Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files after the upload, maybe you don't remember, i aked you a long time ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
-- This email has been checked for viruses by Avast antivirus software.
|
Didier
The debug is in the Logsync itself.
Go to Info and the choose Debug. Then choose Debug on
The debug file can be found in the directory where you installed
Logsync.
73
Jan
PA4JJ
Op 30-10-2024 om 11:44 schreef DIDIER
DIENNE:
Reply
to N2AMG Rick
HelloRick,
thank you for taking a little time to help me out...
I can't start the ''debug'' mode
because my PC doesn't want to register the command? \debug
To see doc1
my problem is:? for example this QSO recording
To see doc2
ThisQSO registers well at LOTW
To see doc3
But he did not ''flag'' la line ''Confirmation envoyée par LOTW ''
As it does very well for E-QSL
Thank you
73
F5JVP
Didier
------ Message d'origine ------
De "Ken McVie" <kenmcvie2@...>
? [email protected]
Date 30/10/2024 05:42:04
Objet Re: [hamlogger] LogSync Update.
------ Message d'origine ------
De "Rick Ellison" <rellison@...>
? [email protected]
Date 29/10/2024 12:22:59
Objet Re: [hamlogger] LogSync Update.
Didier..
It should work correctly I did not touch any of the code in that
routine. If you would Turn Debug on and the next time you log a
qso? the info should be written to the debug file. after a
couple qso's you can turn Debug off and then send me the file
called DebugLog.txt and results.txt Both files will be in the
directory where Logsync is installed. Just send them as
attachments.
73 Rick N2AMG
On 10/29/2024 4:30 AM, DIDIER DIENNE wrote:
TO N2AMG? Rick
Hello Rick,
I don't want to bother you much, because I know that your free
time is very short. First of all, I want to take advantage of
the fact that you and your wife's health problems get better
quickly.
I just have a quick question,
I configured logger32 to automatically send e-qsl and LOTW.
For the e-qsl there is no problem, the procedure is done
perfectly.
For the LOTW, the qso arrives at LOTW but it is not noted in
logger32 as confirmed by LOTW as it should be. However, I did
write: ''perform the flag in logger32''.
Please tell me if this function works correctly again.
73 F5JVP Didier
------ Message d'origine ------
De "F4FQH Olivier via groups.io"
<unit365@...>
? [email protected]
Date 29/10/2024 08:37:23
Objet Re: [hamlogger] LogSync Update.
Hi? Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds
downloaded files after the upload, maybe you don't remember,
i aked you a long time ago. (asked for lotw but maybe
usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la
part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to
finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and
News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info
menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors
when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
-- This email has been checked for viruses by Avast
antivirus software.
--
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
|
to PA4JJ Jan
Hello Jan, Thank you very much for your help, I found it and I will be able to send my file to Rick. 73 F5jvp Didier
------ Message d'origine ------
Date 30/10/2024 11:49:07
Objet Re: [hamlogger] LogSync Update.
Didier
The debug is in the Logsync itself.
Go to Info and the choose Debug. Then choose Debug on
The debug file can be found in the directory where you installed
Logsync.
73
Jan
PA4JJ
Op 30-10-2024 om 11:44 schreef DIDIER
DIENNE:
Reply
to N2AMG Rick
HelloRick,
thank you for taking a little time to help me out...
I can't start the ''debug'' mode
because my PC doesn't want to register the command? \debug
To see doc1
my problem is:? for example this QSO recording
To see doc2
ThisQSO registers well at LOTW
To see doc3
But he did not ''flag'' la line ''Confirmation envoyée par LOTW ''
As it does very well for E-QSL
Thank you
73
F5JVP
Didier
------ Message d'origine ------
De "Ken McVie" <kenmcvie2@...>
? [email protected]
Date 30/10/2024 05:42:04
Objet Re: [hamlogger] LogSync Update.
------ Message d'origine ------
De "Rick Ellison" <rellison@...>
? [email protected]
Date 29/10/2024 12:22:59
Objet Re: [hamlogger] LogSync Update.
Didier..
It should work correctly I did not touch any of the code in that
routine. If you would Turn Debug on and the next time you log a
qso? the info should be written to the debug file. after a
couple qso's you can turn Debug off and then send me the file
called DebugLog.txt and results.txt Both files will be in the
directory where Logsync is installed. Just send them as
attachments.
73 Rick N2AMG
On 10/29/2024 4:30 AM, DIDIER DIENNE wrote:
TO N2AMG? Rick
Hello Rick,
I don't want to bother you much, because I know that your free
time is very short. First of all, I want to take advantage of
the fact that you and your wife's health problems get better
quickly.
I just have a quick question,
I configured logger32 to automatically send e-qsl and LOTW.
For the e-qsl there is no problem, the procedure is done
perfectly.
For the LOTW, the qso arrives at LOTW but it is not noted in
logger32 as confirmed by LOTW as it should be. However, I did
write: ''perform the flag in logger32''.
Please tell me if this function works correctly again.
73 F5JVP Didier
------ Message d'origine ------
De "F4FQH Olivier via groups.io"
<unit365@...>
? [email protected]
Date 29/10/2024 08:37:23
Objet Re: [hamlogger] LogSync Update.
Hi? Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds
downloaded files after the upload, maybe you don't remember,
i aked you a long time ago. (asked for lotw but maybe
usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la
part de Rick Ellison
Envoyé : mardi 29 octobre 2024 02:52
? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I
have just been lacking time due to taking care of my wife.
Today I had my Grand-daughter come sit with her so I could
build an update. There are a few things I was going to
finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and
News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info
menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd
party app.
It now gives a tooltip explaining this and only takes you to
the Clublog login page.
E. Many users complained that windows were causing errors
when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update
routine runs.
73 Rick N2AMG
-- This email has been checked for viruses by Avast
antivirus software.
--
____________________________________________________
my dxspider clusters running on a raspberry pi:
pa4jj-2 77.174.195.163 port 7300
pa4jj-3 77.174.195.163 port 7388
|
Hi Rick
Yes this is already checked.
I speak about the REPORTS.ADI files downloaded each time we download LOTW
Look in the pic i join.
Lotwdownloadqsoreport.adi
If the sync is completed successfuly, the prog. delete this file automaticaly if the user have chosen to do it.
A checkbox to choose to delete or not.
Of course if it's possible.....
Look for this when you have free time, the family first before the rest.
Thanks a lot
73
Olivier
F4FQH
toggle quoted message
Show quoted text
-----Message d'origine----- De : [email protected] < [email protected]> De la part de Rick Ellison Envoyé : mardi 29 octobre 2024 12:18 ? : [email protected]Objet : Re: [hamlogger] LogSync Update. Oliver.. Click Open LOTW setup look at the Left side first checkbox I think this is what you are looking for. 73 Rick N2AMG On 10/29/2024 3:37 AM, F4FQH Olivier via groups.io wrote: Hi Rick,
Thanks for the job even with the hard life.
Try also to make a checkbox to delete or not the olds downloaded files
after the upload, maybe you don't remember, i aked you a long time
ago. (asked for lotw but maybe usefull for the others too)
Big thanks
73
Olivier
F4FQH
-----Message d'origine-----
De : [email protected] <[email protected]> De la part de Rick
Ellison Envoyé : mardi 29 octobre 2024 02:52 ? : [email protected]
Objet : [hamlogger] LogSync Update.
I have had a number of people ask me to release an update. I have just been lacking time due to taking care of my wife. Today I had my Grand-daughter come sit with her so I could build an update. There are a few things I was going to finish working on but this fixes the following:
v2.0.19.8
A. When LOTW is not enabled stops TQSL Update checks and News Checks.
B. When LOTW is disabled hide Update TQSL Menu from Info menu tree.
C. Changed LOTW URL's to log into LOTW website.
D. Clublog no longer allows logging into Clublog from a 3rd party app.
It now gives a tooltip explaining this and only takes you to the Clublog login page.
E. Many users complained that windows were causing errors when resizing.
I have now locked the sizing of the main form to stop this.
You should get a notice in the next 24hrs when update routine runs.
73 Rick N2AMG
--
This email has been checked for viruses by Avast antivirus software.
ast.com%2F&data=05%7C02%7C%7C668eb73d733b4003509008dcf7ec6c2a%7C84df9e
7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638657841994476126%7CUnknown%7CTW
FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
Mn0%3D%7C0%7C%7C%7C&sdata=D3n1emMVxM45pl%2B1RHJ%2BQ5CgzQgpFkfLXqjkNmai
QSw%3D&reserved=0
-- This email has been checked for viruses by Avast antivirus software. www.avast.com
|
ZL2iFB
Jan
