|
Rebuilt the logbook and did a recalc - still no entries when I click on an award grid.? Also tried a fresh .INI, but no luck.
So I thought I would delete all the award files and recalc, but I went too far and deleted some essential files. Back to ground zero, I downloaded the full installation from the web, reloaded my log, did the autoupdate and all is well.
Bill K5DHY
|
Bill, ? It is my great pleasure to present you with this week’s L32 Serendipitous Success Award. ? Please would you choose my NZ Lotto numbers for this evening’s $15m draw? ? 73 Gary? ZL2iFB ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Bill Engel
Sent: 24 July 2021 13:24
To: [email protected]
Subject: Re: [hamlogger] Generic QSO Window? Rebuilt the logbook and did a recalc - still no entries when I click on an award grid.? Also tried a fresh .INI, but no luck.
So I thought I would delete all the award files and recalc, but I went too far and deleted some essential files. Back to ground zero, I downloaded the full installation from the web, reloaded my log, did the autoupdate and all is well.
Bill K5DHY
|
Bill,
?
Could you check all the award options to make sure you get QSO's showing in the Generic QSO window when clicking on a slot please. Assuming you have IOTA references stored etc?
Thanks
73
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 02:24:20
Subject: Re: [hamlogger] Generic QSO Window
Rebuilt the logbook and did a recalc - still no entries when I click on an award grid.? Also tried a fresh .INI, but no luck.
So I thought I would delete all the award files and recalc, but I went too far and deleted some essential files. Back to ground zero, I downloaded the full installation from the web, reloaded my log, did the autoupdate and all is well.
Bill K5DHY
|
Hi? Bill. I had a similar problem in past when I have added a new mode (Q65). Did you did something like that recently? 73
|
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
All your colors/fonts/etc. is inthe INI files. As far as logbooks are concerned, KISS and make an ADIF backup. 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
... and the BandPlan is a text file called MyBandPlan.db 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Thanks Bob it wasn't in the text file must try harder
?
73
????Ian G4GIR
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 16:13:35
Subject: Re: [hamlogger] Generic QSO Window
Yes, be my guest. 73.
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
Bob
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
73
Ian G4GIR?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
My sentiments too Bill.
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 16:54:18
Subject: Re: [hamlogger] Generic QSO Window
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).
On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
KISS. I took the easy way out. ADIFModes.txt has been removed from auto-update files. SeventyThree(s).
On 07/24/2021 12:56 PM Bob <k4cy@...> wrote:
?
?
Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).
On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
OK Ian. ? I’m revisiting the Manual’s advice in this area and will see if I can make it clearer-er, provided I understand what’s required anyway! ? 73 Gary? ZL2iFB ? PS? Too late for the Lotto Ian: the $15m went to some lucky bugger in Auckland last night.? Mind you, $7?m each would have been ‘sufficient’. ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of g4girhb0 via groups.io
Sent: 25 July 2021 02:17
To: [email protected]
Subject: Re: [hamlogger] Generic QSO Window? Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!! Thanks all for your patience and help. Oh, Garry, I don't mind choosing your numbers for next weeks draw :) ----- Original Message ----- Sent: 24/07/2021 14:50:49 Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Bill Engel K5DHY
Panos