开云体育

Icom IC-7610 - radio setup

Vince Shirley All Messages By This Member #85141 Hi all, With my beloved Yaesu FTdx5000 residing in that part of the Bermuda Triangle called Yaesu UK for a warranty repair for 6 covid weeks and counting, I have recently acquired an Icom IC-7610. This, after nearly 40 years in the hobby, is my first serious Icom radio and I'm very much aware that they tend to do things differently to other manufacturers. However, I have set the radio up with no issue at all, thanks to the set by step guide in the manual (thanks Gary) with only one slight issue. When I engage Split and Dual Watch manually on the radio the "Operating Split" box in the Logbook entry window flashes along with the split offset in the band map window and RCP.? I don't recall this happening with other radios. I recollect reading somewhere about the sub-RX frequency of Icom radios not being transferred via CAT - or did I imagine that. Is this intended behaviour? Vince G0ORC ?
Dave Colliau #85142 My 7300 did that also. If you havent got a cure yet let me know and I will look . Its simple but I cant remember what I changed ;) Dave N8DC toggle quoted message Show quoted text On 07/23/2021 4:48 PM Vince Shirley <vince.g0orc@...> wrote: ? ? Hi all, ? With my beloved Yaesu FTdx5000 residing in that part of the Bermuda Triangle called Yaesu UK for a warranty repair for 6 covid weeks and counting, I have recently acquired an Icom IC-7610. ? This, after nearly 40 years in the hobby, is my first serious Icom radio and I'm very much aware that they tend to do things differently to other manufacturers. However, I have set the radio up with no issue at all, thanks to the set by step guide in the manual (thanks Gary) with only one slight issue. ? When I engage Split and Dual Watch manually on the radio the "Operating Split" box in the Logbook entry window flashes along with the split offset in the band map window and RCP.? I don't recall this happening with other radios. ? I recollect reading somewhere about the sub-RX frequency of Icom radios not being transferred via CAT - or did I imagine that. ? Is this intended behaviour? ? Vince G0ORC ? ?
John Munton - G7SSE All Messages By This Member #85144 Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE
Vince Shirley All Messages By This Member #85146 John,? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. I've tried with both Legacy Poll on and off and that doesn't make any difference either. Thanks - take care Vince G0ORC toggle quoted message Show quoted text On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE <johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE
Dave Colliau #85147 In the radio setup try set DTR high. I thaink that fixes it. My 7300 is in the pickup so I wont get out to the garage till tomorrow. Dave N8DC ? toggle quoted message Show quoted text On 07/23/2021 5:59 PM Vince Shirley <vince.g0orc@...> wrote: ? ? John,? ? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference ? When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. ? I've tried with both Legacy Poll on and off and that doesn't make any difference either. ? Thanks - take care ? Vince G0ORC On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE < johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE ? ?
John Munton - G7SSE All Messages By This Member #85148 Vince, apologies, I copied the image from the Help Guide. My actual setting is SO2V, like your self. 73 John - G7SSE toggle quoted message Show quoted text ------ Original Message ------ From: "Vince Shirley" <vince.g0orc@...> To: [email protected] Sent: 23/07/2021 22:59:03 Subject: Re: [hamlogger] Icom IC-7610 - radio setup John,? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. I've tried with both Legacy Poll on and off and that doesn't make any difference either. Thanks - take care Vince G0ORC On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE <johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE -- 73, John - G7SSE
Vince Shirley All Messages By This Member #85149 Dave, Again, thanks but no joy.? I've set it up both as a 7300 or a 7800 but that doesn't seem to make a difference either. V toggle quoted message Show quoted text On Fri, 23 Jul 2021 at 23:05, DAVID COLLIAU <n8dc-8@...> wrote: In the radio setup try set DTR high. I thaink that fixes it. My 7300 is in the pickup so I wont get out to the garage till tomorrow. Dave N8DC ? On 07/23/2021 5:59 PM Vince Shirley <vince.g0orc@...> wrote: ? ? John,? ? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference ? When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. ? I've tried with both Legacy Poll on and off and that doesn't make any difference either. ? Thanks - take care ? Vince G0ORC On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE < johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE ? ?
ja1nlx All Messages By This Member #85150 Vince Check this, Read VFO-B Macro. 73 de aki JA1NLX toggle quoted message Show quoted text ------ Original message ------ From: "Vince Shirley" <vince.g0orc@...> To: "DAVID COLLIAU" <n8dc-8@...> Cc: [email protected] Date: 2021/07/24 7:16:00 Subject Re: [hamlogger] Icom IC-7610 - radio setup Dave, Again, thanks but no joy.? I've set it up both as a 7300 or a 7800 but that doesn't seem to make a difference either. V On Fri, 23 Jul 2021 at 23:05, DAVID COLLIAU <n8dc-8@...> wrote: In the radio setup try set DTR high. I thaink that fixes it. My 7300 is in the pickup so I wont get out to the garage till tomorrow. Dave N8DC ? On 07/23/2021 5:59 PM Vince Shirley <vince.g0orc@...> wrote: ? ? John,? ? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference ? When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. ? I've tried with both Legacy Poll on and off and that doesn't make any difference either. ? Thanks - take care ? Vince G0ORC On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE < johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE ? ?
Vince Shirley All Messages By This Member #85151 Thank you Aki that cured it Very grateful for everyone's help. Now another question..... When using the macro? ?$QSY #Split+01q#$ I get a response from Logger32 "The BandPlan has no entries that match a frequency of? 18099.0 MHz" -? which is true if it really did mean 18099 MHz but it should be 18099.0 kHz Its clearly saying MHz instead of kHz? Odd? Vince toggle quoted message Show quoted text On Sat, 24 Jul 2021 at 00:03, ja1nlx <ayoshida0205@...> wrote: Vince Check this, Read VFO-B Macro. 73 de aki JA1NLX ------ Original message ------ From: "Vince Shirley" <vince.g0orc@...> To: "DAVID COLLIAU" <n8dc-8@...> Cc: [email protected] Date: 2021/07/24 7:16:00 Subject Re: [hamlogger] Icom IC-7610 - radio setup Dave, Again, thanks but no joy.? I've set it up both as a 7300 or a 7800 but that doesn't seem to make a difference either. V On Fri, 23 Jul 2021 at 23:05, DAVID COLLIAU <n8dc-8@...> wrote: In the radio setup try set DTR high. I thaink that fixes it. My 7300 is in the pickup so I wont get out to the garage till tomorrow. Dave N8DC ? On 07/23/2021 5:59 PM Vince Shirley <vince.g0orc@...> wrote: ? ? John,? ? Thank you but that doesn't seem to work.? "Split Operation" is still flashing away to itself.? I'm running SO2V and I see you are set up for SO2R, I don't know if that makes a difference ? When the "Split Operation" box is flashing it makes it impossible to actually make any adjustments in Logger32 as the window focus appears to change.? I have to take the radio out of split, make the change and put it back into split again. ? I've tried with both Legacy Poll on and off and that doesn't make any difference either. ? Thanks - take care ? Vince G0ORC On Fri, 23 Jul 2021 at 22:43, John Munton - G7SSE < johng7sse@...> wrote: Vince The settings I've circled in the screen shots below might be what you need to look at; ? -- 73, John - G7SSE ? ?

Previous Topic Next Topic