开云体育

Hi Neil.

The table on page 355 shows for RBN.? By all means connect directly to RBN to give?it a go ... provided you are ready for the veritable tsunami of robotic?spots, most of which are essentially duplicate spots of the same DX station by different robots e.g. here's part of a minute's worth:

That's really not very useful, especially without filtering down to the few DXstations I'm interested in (i.e. 10m CW this year).???Logger32 has a tough time processing the tsunami, and the don't even try it if you have a slow/costly Internet connection.?

A better option is that some (most?) DXclusters?offer RBN/Skimmer/robotic spots, either on the same port as the manual/human spots (perhaps enabled or disabled with a command) or on a separate port. These may be partially de-duped and sanitised by the DXcluster, depending on how the SysOp has set things up.? You'll have to hunt around on the Web for info from the DXclusters, of which there are hundreds.

Better still, VE7CC's "CC User" program makes it easy to fiddle with the filters and turn Skimmer/robotic spots on or off at each cluster.? See section 13.9 in the manual for details.

I'm not sure what you mean by "The manual page 304 section 13.7 doesn't tie up with the tabs on Logger32.": do you mean the Cluster window tab names?? If so, see page 294, the start of chapter 13.? The first screenshot there shows the default tab names, with a note:?"Once it is connected to DX cluster, a tab takes on the cluster name ..." so a tab that sets out with the name "Telnet" will change to, say, "AE5E" once you connect via Telnet through that tab to AE5E's DXcluster node.?

73

Gary?

?beater/tester &?

Honor Roll &? checker

On Wed, 7 May 2025 at 06:18, Neil, G3RIR via <ackerley.neil=[email protected]> wrote:

I have the latest Logger32. How do I get RBN connected to Logger32?

?

The manual page 304 section 13.7 doesn't tie up with the tabs on Logger32.

?

Neil G3RIR