¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Shift or CTL Click on DX Spot


 

Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?


 

That really was supposed to be shift click.


On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?


 

Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?

On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?


 

Here's the picture again
?
?
SeventyThree(s)

On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?


 

... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).

On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?


 

Bob did you mean the IC-7000 rather than 73000?

Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?

73
John - G7SSE


------ Original Message ------
From "Bob via groups.io" <k4cy@...>
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot

... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?


--
73, John - G7SSE


 

I meant IC-7300, is there an IC-7000?. Maybe IC-7xxx covers all the bases.
?
If there is something special about the IC-7610 CAT control that warrants it's own code, I'd be happy to add it. Other than that, use a compatible IC-7xxx setup (whatever that maybe). 73.

On 04/20/2025 6:08 PM EDT John Munton - G7SSE via groups.io <johng7sse@...> wrote:
?
?
Bob did you mean the IC-7000 rather than 73000?
?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
?
73
John - G7SSE
?
?
------ Original Message ------
From "Bob via groups.io" <k4cy@...>
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
?
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?

?

?


--
73, John - G7SSE


 

I dont know what the difference in command sets is, but its likely to be in the detail.
?
As suggested, if I select the IC-7600 then all seems to work as expected - I hadn't realised I had the generic Icom selected.?
?
All working a treat - thanks as ever for the fast input :-)
?
Mark
G0MGX


 

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE


 

John
I am using ic7610 and set ic7800 as radio.
Shift+Clicking on DX spot moves VFO-B to his frequency.

73 de aki
JA1NLX

On 2025-04-21 ÔÂ 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote:

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE


 

Thanks aki

I've tried as IC-7800 but no luck!

I must be missing a setting somewhere, either in Logger32 or in the 7610.

Hope both you and your good lady are well.

73, John - G7SSE


------ Original Message ------
From "ja1nlx via groups.io" <ayoshida0205@...>
To "Hanlogger" <[email protected]>
Date 21/04/2025 09:58:35
Subject Re: [hamlogger] Shift or CTL Click on DX Spot

John
I am using ic7610 and set ic7800 as radio.
Shift+Clicking on DX spot moves VFO-B to his frequency.

73 de aki
JA1NLX

On 2025-04-21 ÔÂ 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote:

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE

--
73, John - G7SSE


 

this is my working setup:
?
?
?


 

Thanks Mark.

I have this working partially now and I'm using IC-7300 from the list in the setup window.

I have just emailed Bob to see if he can investigate another related matter.

BTW; I don't know if you use the Voice Keyer in your 7610 but if you do,?
using the 7300 in the L32 radio setup will enable Logger32's DVK to trigger your voice messages stored on the SD card in the 7610.

73
John - G7SSE


------ Original Message ------
From "Mark via groups.io" <mark.g0mgx@...>
Date 21/04/2025 17:43:23
Subject Re: [hamlogger] Shift or CTL Click on DX Spot

this is my working setup:
?
?
?


--
73, John - G7SSE