开云体育

FT8 QSOs not logged automatically

Arturo LU6ETB All Messages By This Member #96275 Hi, ? FT8 QSOs some times are not logged autimatically. I am prompted to log the qso. ? As I said it doesn't happen always. ? See below my WSJT-X and Logger configurations. ? What am I doing wrong? Thanks 73 de Arturo, LU6ETB ? ? ? ?
ja1nlx All Messages By This Member #96277 Arturo Check here. 73 de aki JA1NLX toggle quoted message Show quoted text On 2024/10/07 13:41:01, Arturo LU6ETB via groups.io <lu6etb@...> wrote: Hi, ? FT8 QSOs some times are not logged autimatically. I am prompted to log the qso. ? As I said it doesn't happen always. ? See below my WSJT-X and Logger configurations. ? What am I doing wrong? Thanks 73 de Arturo, LU6ETB ? ? ? ?
Arturo LU6ETB All Messages By This Member #96278 Hi Aki, ? I will give a try :) ? Thanks for the tip 73 de Arturo, LU6ETB
R1FZ All Messages By This Member #96281 Hello Arturo, In fact, I have encountered this many times in WSJT-X. In the settings in Log, I have automatic recording in the log, but sometimes this does not happen and I have to enter it manually. Monday, October 7, 2024, 8:38:09 AM, you wrote: toggle quoted message Show quoted text Hi Aki, I will give a try :) Thanks for the tip 73 de Arturo, LU6ETB -- Best regards, Eugene Ermakov R1FZ
Arturo LU6ETB All Messages By This Member #96296 Hi Aki, ? I changed the setting to "Promt me to log QSO" It worked fine for a few QSOs. Later, I was prompted to log them. ? 73 Arturo, LU6ETB
ja1nlx All Messages By This Member #96297 Arturo Is this option checked ? If this does not solve your problem, then temporally uncheck "Enable PSK Reporter Spotting" 73 de aki JA1NLX toggle quoted message Show quoted text On 2024-10-08 火曜日 14:10:26, Arturo LU6ETB via groups.io <lu6etb@...> wrote: Hi Aki, ? I changed the setting to "Promt me to log QSO" It worked fine for a few QSOs. Later, I was prompted to log them. ? 73 Arturo, LU6ETB
ja1nlx All Messages By This Member #96313 Arturo If you run wsjtx directly, then try to run wsjtx from UDP BandMap Start menu.
Arturo LU6ETB All Messages By This Member #96606 Hi Aki, ? Thanks for the tips. I think, I have tried all the combinations without luck. On each combination, I start calling CQ and all the QSOs are logged automatically. ? After some time, the WSJT-X window requesting to to press ok? to log the qso appears. If I don't press ok, the qso is not transferred to Logger. ? Same behavour when using Cherry Picking. ? 73 de Arturo, LU6ETB
ja1nlx All Messages By This Member #96607 I do not remember your original message. When QSO is logged in wsjtx, this QSO is not logged automatically in Logger32. Is this your problem ? Run wsjtx always from UDP BandMap.? Check "Enable contemporaneous user input sequence" option. Uncheck "TCP/ADIF logging" option Otherwise it does not work correctly. 73 de aki JA1NLX toggle quoted message Show quoted text On 2024-11-06 水曜日 9:27:19, Arturo LU6ETB via groups.io <lu6etb@...> wrote: Hi Aki, ? Thanks for the tips. I think, I have tried all the combinations without luck. On each combination, I start calling CQ and all the QSOs are logged automatically. ? After some time, the WSJT-X window requesting to to press ok? to log the qso appears. If I don't press ok, the qso is not transferred to Logger. ? Same behavour when using Cherry Picking. ? 73 de Arturo, LU6ETB
Bob All Messages By This Member #96608 Try using JTDX. SeventyThree(s). toggle quoted message Show quoted text On 11/05/2024 7:27 PM EST Arturo LU6ETB <lu6etb@...> wrote: ? ? Hi Aki, ? Thanks for the tips. I think, I have tried all the combinations without luck. On each combination, I start calling CQ and all the QSOs are logged automatically. ? After some time, the WSJT-X window requesting to to press ok? to log the qso appears. If I don't press ok, the qso is not transferred to Logger. ? Same behavour when using Cherry Picking. ? 73 de Arturo, LU6ETB
Arturo LU6ETB All Messages By This Member #96625 Hi Bob, ? Today, I tried with JTDX v2.2.159 Same issue. I did 22 qsos and they were logged automatically. At qso nr 23, I was prompted to log the qso manually. ? What I see is that if I do not press the ok, it is not logged neither in Logger nor in wsjtx_log.adi nor wsjtx.log ? Exiting the JTDX and starting it again, does not solve the issue. To have it working back it is needed to exit Logger32 and restart it. ? I oppened the UDP message debug window. The only difference ?I was able to notice between both cases is that the red "QSO log request" message is not showed. ? Now, I did 32 qsos with no failure. ? 73 ? ?
ja1nlx All Messages By This Member #96626 Did you start JTDX from UDP BandMap Start menu ? 73 de aki JA1NLX toggle quoted message Show quoted text On 2024-11-11 月曜日 10:16:28, Arturo LU6ETB via groups.io <lu6etb@...> wrote: Hi Bob, ? Today, I tried with JTDX v2.2.159 Same issue. I did 22 qsos and they were logged automatically. At qso nr 23, I was prompted to log the qso manually. ? What I see is that if I do not press the ok, it is not logged neither in Logger nor in wsjtx_log.adi nor wsjtx.log ? Exiting the JTDX and starting it again, does not solve the issue. To have it working back it is needed to exit Logger32 and restart it. ? I oppened the UDP message debug window. The only difference ?I was able to notice between both cases is that the red "QSO log request" message is not showed. ? Now, I did 32 qsos with no failure. ? 73 ? ?
Bob All Messages By This Member #96627 I have no idea. There is no code in Logger32 that keeps count of the number of contacts that are automatically logged. ? I use the cherry picker, but have only made a hand full of contacts. It has worked as expected.? ? You have tried WSJT-X and JTDX with the same result. Maybe time to try another cherry-picker. ? SeventyThree(s. toggle quoted message Show quoted text On 11/10/2024 8:16 PM EST Arturo LU6ETB via groups.io <lu6etb@...> wrote: ? ? Hi Bob, ? Today, I tried with JTDX v2.2.159 Same issue. I did 22 qsos and they were logged automatically. At qso nr 23, I was prompted to log the qso manually. ? What I see is that if I do not press the ok, it is not logged neither in Logger nor in wsjtx_log.adi nor wsjtx.log ? Exiting the JTDX and starting it again, does not solve the issue. To have it working back it is needed to exit Logger32 and restart it. ? I oppened the UDP message debug window. The only difference ?I was able to notice between both cases is that the red "QSO log request" message is not showed. ? Now, I did 32 qsos with no failure. ? 73 ? ?

Previous Topic Next Topic