¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

GB7UJS - British Telecom - FAIL

 

Hi all,

I know many L32 users use Dx Cluster GB7UJS.

at the moment due to a monumental cock up from British Telecom I have no internet connection.

the best brains in the UK and India are working on it.

Help,

back as soon as possible

73 de Rob G4UJS


Re: FTdx10 and Bands & Modes table

 

As a cerebral exercise, temporarily change the 20m CW row to be from 14.00 to 14.35 MHz. SeventyThree(s).

On 08/03/2021 4:20 PM John, G4DRS via groups.io <g4drs@...> wrote:
?
?
When I have my FTdx10 set to CW or USB and tune to 14.080 (FT4 frequency), the correct antenna is selected automatically by my antenna switching arrangement. However, when I have the radio set to DATA-U, no antenna is selected.
Aha! I thought, I know what it is, there is no setting for that frequency in the B&M Table.
Then I thought 'Yes, there is'. It works with the other radio (FTdx5000). It used to work with the IC7300, too.
I have the FTdx10 set up as a FT101D in Logger32.
This:

is my bands and modes table for the frequency in question.

This:



is my phone/digital mode setup.

I read the help and I felt I may need to add the little vertical line and 'DATA-USB' to the bands & modes table, so I tried that.

That made no difference.
Watching the OTRSP traffic between Logger32 and my YCCC SO2R box, I see that Logger32 sends 'AUX25' to select radio and antenna 5 when I switch to CW, but sends 'AUX20', thus selecting antenna 0, when I switch to DATA-U.?

I have reached the limit of my own incompetence now.

Has anyone the solution to this conundrum? I'm probably doing something simple wrong.

Cheers,

John
G4DRS




FTdx10 and Bands & Modes table

 

When I have my FTdx10 set to CW or USB and tune to 14.080 (FT4 frequency), the correct antenna is selected automatically by my antenna switching arrangement. However, when I have the radio set to DATA-U, no antenna is selected.
Aha! I thought, I know what it is, there is no setting for that frequency in the B&M Table.
Then I thought 'Yes, there is'. It works with the other radio (FTdx5000). It used to work with the IC7300, too.
I have the FTdx10 set up as a FT101D in Logger32.
This:

is my bands and modes table for the frequency in question.

This:



is my phone/digital mode setup.

I read the help and I felt I may need to add the little vertical line and 'DATA-USB' to the bands & modes table, so I tried that.

That made no difference.
Watching the OTRSP traffic between Logger32 and my YCCC SO2R box, I see that Logger32 sends 'AUX25' to select radio and antenna 5 when I switch to CW, but sends 'AUX20', thus selecting antenna 0, when I switch to DATA-U.?

I have reached the limit of my own incompetence now.

Has anyone the solution to this conundrum? I'm probably doing something simple wrong.

Cheers,

John
G4DRS




Re: IC-7300 One Way Communication

 

... pages 703/704 of the current Help documentation enumerate the internal IC-7300 menu settings ... The one in question is CI-V USB Echo Back must be on. SeventyThree(s).

On 08/03/2021 2:54 PM Bob <k4cy@...> wrote:
?
?
If I remember any of the numerous postings on the reflector about this subject is that the key to success is an internal menu setting on the IC-7300 ... ECHO must be ON (or something). SeventyThree(s).
On 08/03/2021 2:41 PM Panos <sv1grn@...> wrote:
?
?
Hi these are my settings I hope helps 73


Re: IC-7300 One Way Communication

 

If I remember any of the numerous postings on the reflector about this subject is that the key to success is an internal menu setting on the IC-7300 ... ECHO must be ON (or something). SeventyThree(s).

On 08/03/2021 2:41 PM Panos <sv1grn@...> wrote:
?
?
Hi these are my settings I hope helps 73


Re: IC-7300 One Way Communication

 

Hi these are my settings I hope helps 73


Re: IC-7300 One Way Communication

Gerard Arsenault
 

Hey Paul, I just purchased an IC-7300 and have the same rig control problem with Logger32 using Version 272. Works fine on my IC-7000 and other digital modes, N1MM, WSJT, and FLDIGI. Would you mind telling me what settings you are using in "Rig Configuration" and in the "Band Mode Selection" panel of Logger32?

73,

Jerry VE9CD


Re: v4.0.272 is on-line ...

Kenneth Hansen
 

Ok, thanks Bob, it¡¯s not an issues at all

On Tue, Aug 3, 2021 at 9:09 AM Bob <k4cy@...> wrote:
By design. You can still customize the results by saving the DoNoDelete.xls file somewhere, and modifying the results to suit your needs. SeventyThree(s).
On 08/03/2021 8:55 AM Kenneth Hansen <khansen@...> wrote:
?
?
Quick question, in Awards, Simple, Primary and Secondary Awards the option to select Excel Template it not available.
Is that by design?
?

On Tue, Aug 3, 2021 at 8:48 AM Bob < k4cy@...> wrote:
Maintenance release (bug fixes) v4.0.272 is on-line. SeventyThree(s).

?

?

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: v4.0.272 is on-line ...

 

By design. You can still customize the results by saving the DoNoDelete.xls file somewhere, and modifying the results to suit your needs. SeventyThree(s).

On 08/03/2021 8:55 AM Kenneth Hansen <khansen@...> wrote:
?
?
Quick question, in Awards, Simple, Primary and Secondary Awards the option to select Excel Template it not available.
Is that by design?
?

On Tue, Aug 3, 2021 at 8:48 AM Bob < k4cy@...> wrote:
Maintenance release (bug fixes) v4.0.272 is on-line. SeventyThree(s).

?

?

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: v4.0.272 is on-line ...

Kenneth Hansen
 

Quick question, in Awards, Simple, Primary and Secondary Awards the option to select Excel Template it not available.
Is that by design?


On Tue, Aug 3, 2021 at 8:48 AM Bob <k4cy@...> wrote:
Maintenance release (bug fixes) v4.0.272 is on-line. SeventyThree(s).

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: v4.0.272 is on-line ...

Kenneth Hansen
 

Thanks Bob

On Tue, Aug 3, 2021 at 8:48 AM Bob <k4cy@...> wrote:
Maintenance release (bug fixes) v4.0.272 is on-line. SeventyThree(s).

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


v4.0.272 is on-line ...

 

Maintenance release (bug fixes) v4.0.272 is on-line. SeventyThree(s).


Re: Worked/Confirmed Not Populating

 

In an effort to verify it is not your logbook or statistics databases that are broken, try this:
?
a) create a new/empty logbook
b) add a dummy QSO with W3GQ
c) type W3GQ in the logbook?entry window
?
See anything in the worked/confirmed window? If you do, then you have a database problem. If toy do not, you have a configuration problem.
?
d) Switch back?to your 'real' logbook
e) Make an ADIF backup of the logbook and put it under the mattress
?
If you problem appears to be database related, try this:
?
f) Rebuild your logbook
g) Recalculate your statistics.
?
Any better? SeventyThree(s).

On 08/03/2021 8:20 AM Paul Sturpe <sturpe@...> wrote:
?
?
Hi Gary,
Yes (and I should have said this initially)? all the rows in my bands and mode table have the Y in them.? I even rolled back logger32 to earlier versions (no joy.)? ?Then I used an earlier Logger32.ini file (no joy.)

I also read through the help file, searched the groups.io, Googled it and all I came up with was talk about not showing SAT QSOs.? SAT QSOs are not an issue for me.? I also recalculated distance and statistics, and rebuilt my logbook.? Did I miss anything?

This used to work for me.? ?I don't know when it started happening, but I just noticed it yesterday.? So any other suggestions to try?? ?I'm out of ideas!

Paul, W3GQ


Re: Worked/Confirmed Not Populating

 

Hi Gary,
Yes (and I should have said this initially)? all the rows in my bands and mode table have the Y in them.? I even rolled back logger32 to earlier versions (no joy.)? ?Then I used an earlier Logger32.ini file (no joy.)

I also read through the help file, searched the groups.io, Googled it and all I came up with was talk about not showing SAT QSOs.? SAT QSOs are not an issue for me.? I also recalculated distance and statistics, and rebuilt my logbook.? Did I miss anything?

This used to work for me.? ?I don't know when it started happening, but I just noticed it yesterday.? So any other suggestions to try?? ?I'm out of ideas!

Paul, W3GQ


Re: Awards Window and dxcc-4L32F Template

Kenneth Hansen
 

By the way, do you have stats set to Y in Tools-Bands and Modes?
If not, they don¡¯t show up in Awards

On Mon, Aug 2, 2021 at 10:28 AM g4girhb0 via <ian.frith=[email protected]> wrote:
Thanks Bob and Kenneth for the comments.
?
Kenneth if I had 311 on all bands,?MIXED, DIGI, PHONE and CW I probably wouldn't print to much either, as it is, I only have 337 MIXED/CW AND 332 PHONE, Most band countries are a lot less?so a lot of work to get to the top of the tree on the different bands. So being able to see quickly what you need on what bands is still most important. Having played with the dxcc-4L32F, template, it is working and doing what it should as far as I can tell, except for the filling in of Deleted country rows?and the column headers in black, completely obscuring the text. Hope you can fix that Bob.
?
It seems the Template only has enough room for the Valid DXCC award Bands, which is obviously what it? was designed for.?Those bands being selected in the Bands and Modes set up and Y being selected in the STATS COLUMN, if Y is selected in any more bands then the template will add them to the report and screw up.
?
It would be nice to see all the bands you work in one display, albeit some of those bands are not valid for any DXCC Award. One way around the problem would be to create yet another config for Non DXCC Bands i.e MF, LF and the?millimeter bands.
So my original question :- Is anyone able to modify the template to accommodate more bands? Still stands.
?
One other crucial function the dxcc-4L32F Template doesn't have is the ability to differentiate between bands, i.e tell me what countries I need on 160m Phone, again this is not what it intended? to do I guess.
?
?
I am not feeling very hopeful as to date only one person plus myself seems to be using it!! Hi.
?
73
?
Ian G4GIR
?
----- Original Message -----
From: Kenneth Hansen <khansen@...>
Reply-To: <[email protected]>
Sent: 01/08/2021 21:44:07
Subject: Re: [hamlogger] Awards Window and dxcc-4L32F Template

Well, at 311 I don¡¯t to print too often :)

On Sun, Aug 1, 2021 at 3:37 PM Bob <k4cy@...> wrote:
Using DXCC-4L32F I see some gibberish, if that's what you're asking
And, I have fixed the deleted countries highlight color for the next auto-update. V4.0 broke it (shows how often people print their DXCC). SeventyThree(s).
<i.frith=[email protected]> wrote:
Yes? I see that anomaly too with the deleted countries and the column headers all black.
Do you see the Radio Buttons to select Worked, Worked not confirmed, confirmed etc etc? when you use the dxcc-4L32F template, I don't see them in your Screen shot??
73
Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < [email protected]>
Sent: 01/08/2021 19:56:29
Subject: Re: [hamlogger] Awards Window and dxcc-4L32F Template

I see this:
I see no Excel rules filtering/limiting bands. I do see (with both the generic Logger32 doNotDelete.xls and the DXCC-4L32F.xls that 21st Century Excel doesn't like the light gray deleted Country highlight). SeventyThree(s).
On 08/01/2021 1:56 PM G4GIR via <i.frith=[email protected]> wrote:
Ok Bob,
It is a utility on
Would be interested if you could try it out and give me your verdict. It is documented on page 527 of the Version 4 user manual.
73
Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < [email protected]>
Sent: 01/08/2021 18:41:28
Subject: Re: [hamlogger] Awards Window and dxcc-4L32F Template

Never heard of it. 73.
On 08/01/2021 1:36 PM g4girhb0 via <ian.frith=[email protected]> wrote:
Hello Bob,
Yes Bob writing to an Excel file produces the same result here, but using the dxcc-4L32F TEMPLATE to write to doesn't produce the correct results.
Have you used the Template?
73
Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < [email protected]>
Sent: 01/08/2021 17:20:54
Subject: Re: [hamlogger] Awards Window and dxcc-4L32F Template

Set up the DXCC award any way you like. Writing to an Excel file simply reads/writes all columns/rows in the DXCC Award to the Excel file, like this.
.
SeventyThree(s)
On 08/01/2021 11:24 AM G4GIR via <i.frith=[email protected]> wrote:
Hi All

Been trying to get the Template for the Print Awards to Excel working. Finally got it to work but had to remove all bands from the Set up Bands and Mode page Below 1.8 and above 6m.

So none of these bands now show in statistics.

The Template doesn't seem to like any more than 10 bands. I guess only DXCC valid bands are required anyway.

So has anyone else found this to be the case? Does anyone actually use the Template dxcc-4L32F? Is anyone able to modify the template to accommodate more bands?

Big asks I know.

Glad I decided to move to L32.

73

Ian G4GIR

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: Awards Window and dxcc-4L32F Template

 

Ian,

I am a bit busy this morning, I will reply to you, by direct mail, this afternoon. Please be patient, sorry.

73, Dave


Re: Worked/Confirmed Not Populating

 

TOOLS=setup bands and modes...73,john

On 2021-08-03 00:59, Gary Hinson wrote:
Hi Paul.
Chapter 10 of the User Manual covers the worked/confirmed window [1]
¡­ but glancing at it just now, you could argue that its sections
should be in the reverse order. Anyway, take a look at the FAQ at the
end, and the previous section. The main clue you need is to have some
Y¡¯s in the statistics column of your Bands & Modes table ¨C not the
most intuitive function in Logger32, I know, but that¡¯s how Bob
designed and coded it.
I think I ought to add-in advice on how to show selected bands as
well. First I need to remember or figure out how to do it!
73 GL
Gary ZL2iFB
From: [email protected] <[email protected]> On Behalf Of Paul
Sturpe
Sent: 03 August 2021 14:36
To: [email protected]
Subject: [hamlogger] Worked/Confirmed Not Populating
My Worked/Confirmed window is not populating and in fact I can't get
column headers on that window either. Any suggestions to try?
Paul, W3GQ
Links:
------
[1] ;zoom=100,76,146
[2] /g/hamlogger/message/85302
[3] /mt/84629872/796390
[4] /g/hamlogger/post
[5] /g/hamlogger/editsub/796390
[6] /g/hamlogger/leave/8057516/796390/1701416439/xyzzy


Re: Worked/Confirmed Not Populating

Gary Hinson
 

¿ªÔÆÌåÓý

Hi Paul.

?

Chapter 10 of the User Manual covers ¡­ but glancing at it just now, you could argue that its sections should be in the reverse order.? Anyway, take a look at the FAQ at the end, and the previous section.? The main clue you need is to have some Y¡¯s in the statistics column of your Bands & Modes table ¨C not the most intuitive function in Logger32, I know, but that¡¯s how Bob designed and coded it.

?

I think I ought to add-in advice on how to show selected bands as well.? First I need to remember or figure out how to do it!

?

73 GL

Gary? ZL2iFB

?

?

From: [email protected] <[email protected]> On Behalf Of Paul Sturpe
Sent: 03 August 2021 14:36
To: [email protected]
Subject: [hamlogger] Worked/Confirmed Not Populating

?

My Worked/Confirmed window is not populating and in fact I can't get column headers on that window either.? ?Any suggestions to try?

Paul, W3GQ


Worked/Confirmed Not Populating

 

My Worked/Confirmed window is not populating and in fact I can't get column headers on that window either.? ?Any suggestions to try?

Paul, W3GQ


Re: "Checking for Excel"

 

If your PC does not have Excel, or you don't want to use Excel for format/print your awards tables, then you can cancel the check for Excel by doing this:
?
a) Stop Logger32
b) In your Logger32 directory, open the Logger32.INI file with Notepad
c) Find the line [Globals]
d) Add a line under it exactly like this Check For Excel=No
e) Save the change and exit Notepad
f) Run Logger32.
?
SeventyThree(s).

On 08/02/2021 3:21 PM Gerard Arsenault <jerrya@...> wrote:
?
?
When Logger32 is launched, a message comes up "Checking for Excel" which freezes the program while it searches. I have attempted to find this reference within Logger32.INI but it does not exist. Does anyone know how this command gets initialized?