开云体育

I Googled the SmartSDR documentation, but find no reference to Baud rate/parity/etc. of the serial port. What speed settings are available, and what are you configured for? Both Logger32 and SmartSDR

? 73 de aki JA1NLX

Thanks, Aki. That makes prefect sense. It's even in the manual! I couldn't find it when I first looked, though... :) 73 John G4DRS

John If "Contemporaneous user input sequence" option is checked (in UDP BandMap, Config/Logging option), this message is displayed. If this option is checked, QSO is logged automatically in Logger32

During Logger32 start-up, various little windows pop up on the screen, including one that says something like "User Input Key Clicks Saved". What is that telling me, exactly? At this point, I have

Hi Hamalert.org is a nice feature who can do the filtering for u. It can grab you stats from clublog and filter your telnet connection based on that. /David - SM3ULU Den 7 maj 2025 00:22 skrev "ZL2iFB

Thanks Sir. Yes i did try the poll settings and I did change it to 200ms but still happens sometimes... 73 Groete uit Kaapstad

Jiean-Jose Please read USB driver install manual provided by Yaesu. 73 de aki JA1NLX

Hi Aki, It seems I have some problem to install the driver. When I connect the USB Cable the unit is not known. So the two serial port as you said doesn't appear. De : [email protected]

Jiean-Jose You need following steps. 1. Download and install USB driver (Yaesu web site) 2. Connect USB cable. 3. Look at Windows device manager. You see two serial port"'Enhanced" and "Standard") 4.

Hi, I just received my new YAESU FT-710 could you please help me to have it connected to Logger32. I have the USB Cable but seems to have some matter with the USB Driver. Thank you for your answer. 73

Hi Neil. The table on page 355 shows telnet.reversebeacon.net:7001 for RBN. By all means connect directly to RBN to give it a go ... provided you are ready for the veritable *tsunami *of robotic

Is it possible that you have the polling set too fast. On the Logger32 radio config, set polling to 200ms, the slowly decrease it 10ms at a time until oyu will reach a point where the connection

I have the latest Logger32. How do I get RBN connected to Logger32? The manual page 304 section 13.7 doesn't tie up with the tabs on Logger32. Neil G3RIR

Sometimes the communication between Flex 8400 and Logger32, lose connection. I will change bands on Flex but Logger32 just display previous frequency I then restart SmartSDR and the most times it

Yes, that's the way to do it -- thanks a lot. Best 73s, Peter OZ1LFI

I'm afraid I do not understand your position. You said that you are happy with the 30 chars but you already implemented the possibility to send up to 60 chars by flagging the "long line" option,

Set/Show width on DX Clusters is an interesting subject. I have checked several, and they all show a default width of 75. The minimum setting allowed is 45. Just for fun, I set the width to 46. Only

Would it be possible to increment this limit, if it doesn't bother you too much? Maybe it had a sense at the epoc of the packet cluster but nowadays the limit of 30 characters is a bit anachronistic.

Logger32 limits DX Spot comments to 30 characters. SeventyThree(s).