开云体育

Would it be possible to increment this limit, if it doesn't bother you too much? Maybe it had a sense at the epoc of the packet cluster but nowadays the limit of 30 characters is a bit anachronistic.

Logger32 limits DX Spot comments to 30 characters. SeventyThree(s).

The need is to send spot with more than 30 char comment using a single DX command. No, the cluster will not remove all excess text, as far as you set the width (i.e. set/width 120) 73 Andrea

This will send the DX Spot as a single long line. The cluster will remove all excess text. SeventyThree(s).

You can export your contest log then import it into ADIF Master. Delete the QSO numbers, save it and then import it into Logger32. Jim K2QB

Hi, when I send a spot with a long comment then it is splitted into multiple dxspots. Dxcluster doesn't like this as the multiple dxspots are considered duplicated. Would it be possible to send only

Nope - I was expecting auto populate. I said it would be something very stupid ? Mark ________________________________ Sent: 05 May 2025 12:00 PM To: Hanlogger <[email protected]> Subject: Re:

Mark You need to click the line in popup window to transfer data to Logger32. You did ? 73 de aki JA1NLX

Correction, menu says 8.1 but banner in app says 8.2. Mark ________________________________ Sent: 05 May 2025 10:57 AM To: [email protected] <[email protected]> Subject: Re: [hamlogger] CheckCall

I have 8.1 [email protected]> wrote:

MarK What is the version of CheckCall ? The latest one is ver8.2. If you mean CheckCallMini, then the latest one is ver7.2. 73 de aki JA1NLX

Hi All I'm struggling with something very simple, which usualy means I've missed something very stupid :-( I have CheckCall by JA1NLX on my Utilities menu and it is configured to auto lookup the call

Try this. 1. Backup your Logbook in ADIF. 2. Import your contest log. 3. Reformat QSO number. (Tool/Database meintenance/Reformat QSO number) 73 de aki JA1NLX

Hi Group, Simple question -- hopefully... Is it possible to export a complete logbook to ADIF, but without the QSO numbers. Reason for asking is that I'm using L32 for RTTY contesting -- and yes, it

Hi Bob et al., Thanks for the many constructive suggestions -- unfortunately neither worked, and this problem was therefore gradually driving me crazy. So, this weekend I decided to uninstall L32 and

That pearl of wisdom has been in the manual for at least a year, in section 49.3 for the TS-570 and TS-870 ... 73 Gary ZL2iFB <http://www.g4ifb.com> Logger32 <https://www.logger32.net/> beater/tester

Thanks for posting. I'm sure this pearl of wisdom will make it into the documentation. Don't you just hate it when your radio is smarter than you are? SeventyThree(s).

Dilemma solved. After much research, I found that the TS870 needs to use a straight through serial cable. Once I obtained one and plugged it in, CAT control took right off! Just a note for anyone else

Thanks to all- I really do RTFM but this tidbit eluded several searches. Gary, you are a candidate for Ham Radio Saint Hood for writing and maintaining that incredible manual. I wish that most

Re automatically populating the name, QTH or other fields, you need to use the "QSO mask" feature ... which is described in the manual in section 6.2.15 ... but I agree it is not exactly prominent, or