开云体育

Precious little information ....I'll assume you're using UDP logging. I'll further assume the Logger32 UDP BandMap is alive as well, and showing decoded stations callsigns. If my assumptions are

Anyone had any problems today as regard to logging FT8 and FT4 qso’s direct into to logger32 none of qso’s were logged into my logbook using JTDX WSJTX luck has if the went info there respective

GE Bob, I have learned another possibility : SPLIT how did I live without it till today ... hehe Incidentally I had an old L32 manual so I did not find your references, now is ok. TNX x help 73 Phil

AHHH! So you are the ONE !!!! ? 73 de Larry K8YYY [email protected]> wrote:

If I needed to do that, I would use macros I already have ... a) Split up 5 b) Tune c) Split off. SeventyThree(s). PS. I always tune on the TX frequency. It gives the other station warning to turn

HI Gary, John et All. Thank you for the advices, after 20 et more years of L32 use I have learned more options I never used HI. Both options the Scratchpad and the DX-Spot_History relate to the SPOTs

Thanks Rick ! 73 de IK6CGO

There is no column for OQRS on the Logger32 Logbook Page or Previous QSOs windows. SeventyThree(s).

On Logsync you will need to use the dropdown on the LOTW tab and select the call you want to upload under. That dropdown is filled by reading the station_data file that is created by Tqsl. If you

Sorry for the mistake, I've send this email to a wrong group. 73's Lenio IZ5ILJ.

HI John, once I did the OQRS request I flag also the QSL sent and this will write the date in the QSL_SENT field. I guess that if you request a QSL online, you are not going to send also paper QSL.

Hello everyone, can anyone tell me the name of the font used for the frequency? Some font must be corrupted on my PC because I can see like this! Thanks in advance to anyone who can help me, 73's

Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ? Thanks

Hi to all, I'm using L32LogSinch v2.0.19.8 and I have to say a *big thank* to Rick N2AMG, the program works great. Now, before I have possible problems, I ask your opinion. On TQSL I have two

Hi all New screeshot by Felix, EA4HOS has been added in the gallery. https://ja1nlx.web.fc2.com/L32Screenshot/screenshot3.html [https://ja1nlx.web.fc2.com/L32Screenshot/screenshot3.html] 73 de aki

Congratulations. Refreshingly open about it, many are not so and leave us wondering. Regards, Mike VP8NO

Sorry for my first message. I found what I was looking for. The very bottom of the log has a square button that lets me drag horizontally to the right or back to the left. At the end of screen, there

Hi Gary, I will try this and let you by direct email. 73 Andrea iz2lsc [email protected]> ha scritto:

Section 14.5 DX spot history on page 346 might also prove useful too. -- 73, John - G7SSE

... or look at the last paragraph on page 309 of the help file. SeventyThree(s).