开云体育

I received this message at 13:00 local time. Then I received a message at 13:06 referring you having done a recalc and it made no difference ... Unless it takes 6 minutes or less for you to do a

Vince The settings I've circled in the screen shots below might be what you need to look at; -- 73, John - G7SSE

GARY - From the screen view you posted, I think your beta crew member is still running Windows 7.? Yes, some MS upgrades to Win10 did allow the user to incorrectly retain the previous Win7 control

My 7300 did that also. If you havent got a cure yet let me know and I will look . Its simple but I cant remember what I changed ;) Dave N8DC

Hi all, With my beloved Yaesu FTdx5000 residing in that part of the Bermuda Triangle called Yaesu UK for a warranty repair for 6 covid weeks and counting, I have recently acquired an Icom IC-7610.

Hello again all, I have narrowed the problem down to 3 Awards, DXCC, DXCC Challenge and IOTA, all other Award windows work OK in the rogue GENERIC QSO WINDOW, i.e QSO's are shown in the GENERIC QSO

I just did the re-calc see my earlier Post, it didn't make any difference. Yes it works for me in all my other configs !! 73 Ian

The DXCC award report works as expected for me e.g. If your award reports are empty or incomplete, the usual cure is to recalculate statistics

Well John I thought you had cracked it, the Band/Mode map in the rouge config was full of N's in the Stats column but when looking at the other config's Band/Mode Map they were the same, I changed all

Not quite as long as I thought it would take 23 minutes. But still misbehaving. Will try that after what John has suggested re Bands/Mode Table. Last time I did a re-build It all went haywire lol. 73

Ian, a long shot; I believe each configuration will have its own Band Mode Table. Compare the table for the rogue config with the other working ones and look for any anomalies / variations. -- 73,

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).

Started the re-calc will let you know in about an hour or so. However the totals in the DXCC Awards window are spot on! 73 Ian

You might try recalc of your stats. 73.

Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook. Bill K5DHY

L32 friends, One of the beta crew has solved his autoupdate failures by selecting TLS 1.2 (specifically) under Internet Properties (from the Windows Control Panel): Something else to check if your

:)

I find it a harmless, inoffensive and quite useful definite article. How has it upset you? Sent: 23 July 2021 01:50 To: [email protected] Subject: [hamlogger] Generic QSO Window Problem I have a

Cheers Bob 73

I have no idea. Maybe someone else has the answer. Good luck. 73.