Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Hamlogger
- Messages
Search
|
Re: column layout !!!!!!
SV1CRX
thank you for the answer i try to do the same with qsl_via in that
place but still the same , after one qso with a qsl manager the program puts the previews qsl man and to the other qso ,my english is not very good but i hope to understand this. 73,s SV1CRX - In hamlogger@..., wb4mle@s... wrote: athe problem here is with the field in the logbook page <QSLMSG> isqslmanager callsing from another qso and i must go to corect itThe QSLMSG field is QSL MESSAGE not qsl manager. The QSL_VIA field for qsl manager, route etc. Notes may also be used. QSLMSG is forinfo printed on the qsl card such as "Thanks for the XXX contest qso". |
|
Re: Setup
Gary and Julie Burow
Geoff, as per the original e-mail, the setup program said that some of my
toggle quoted message
Show quoted text
system files needed to be updated and offered to do it for me if I shut down the computer and re-started. I HAD to try again to see what had happened. As it turnes out, nothing happened and I was no furthed down the track. Fortunately, I had an image of an earlier version of a Win 2000 installation and reverted back to that and it worked so obviously something had gone wrong with the system. Tnx fer reply Gary VK4GCB -------Original Message-------
From: hamlogger@... Date: Wednesday, 18 June 2003 09:23:28 AM To: hamlogger@... Subject: Re: [hamlogger] Setup I have a couple of questions here:- 1) Logger32 was (and is) being developed on a Win98SE system so the included files would be from that era. Now what its the announcement actually saying/ Is it the the files you have already are more up to date that those provided or is it the other way round? If your files are more current, then keep them. 2) You say that when you run setup AGAIN .... Why do this? Is Logger32 not running for you - and if so, what is the problem? 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message ----- From: "Gary and Julie Burow" <vk4gcb@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 10:51 PM Subject: [hamlogger] Setup I have had Logger 32 running under Windoze 2000 successfully.Unfortunately I had a hard drive problem and had to re-install everything. Now, Setupit gives the same result. Am I doing something wrong? ------------------------ Yahoo! Groups Sponsor ---------------------~--> Get A Free Psychic Reading! Your Online Answer To Life's Important Questions ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to . |
|
Re: LOGGER32 FILE BACKUP
Fabio IZ4AFW
At 00:33 18/06/2003 -0400, you wrote:
I have the following questions:I don't know, but I think that this could be a bug... 2. Is it not necessary to copy the Copy of xxxxxx files? Apparently not as they are contained in the User Files Zip file.I think that the "Copy of xxxxxxxxx" files are not part of the Logger32 "original" distribution but created by a copy&paste action, maybe to have another copy. Are you sure that the "Copy of ...." files are identical to the corresponding files? I think they are not updated...so they could be an old copy of your logbook. 3. Whay are the Stats32.xxx files not included in the User Files Zip file?I think because they can be recalculated from the menu (Tools/Maintenance/Recalc stats) Ciao & 73 Fabio IZ4AFW |
|
Re: Setup
Hi Gary,
toggle quoted message
Show quoted text
W2000 does not allow you to overwrite DLL's (thank god) so it will replace the overwritten systemfiles with the original ones and nothing changes... maybe you should try to install w2k service pack first. In general I will not install software that tries to overwrite system DLL's with W95/W98 trash. It is not a recommendation that L32 is developed for W98... there are better Windows versions around today. Don't think that most HAM's stick with W98.... most visitors to my web pages use XP already. 73, Arend ----- Original Message -----
From: "Gary and Julie Burow" <vk4gcb@...> To: <hamlogger@...> Sent: Wednesday 18 June 2003 00:51 Subject: [hamlogger] Setup I have had Logger 32 running under Windoze 2000 successfully.Unfortunately I had a hard drive problem and had to re-install everything. Now, Setupit gives the same result. Am I doing something wrong? |
|
US Counties - minor bug and QSL sent/received defaults
Hello all,
1), There is a minor bug when entering US county, nothing major, but needs to be addressed at some stage. Pick two US callsigns in the logbook. In the "STATE" field change/add state for the first one (let's say TN), then change/add state for the second callsign (let's say CA). Then move back to the first callsign and enter county "Hamilton" in the "COUNTY" field (valid county for TN). I got a message "HAMILTON does not appear to be a valid county in CA". The county is entered then with no problem. For some reason when entering a county Logger32, when checking the county, ignores the state in the "STATE" field for the callsign and looks at the last entered state, hence the message. Hope I explained the issue. 2). It would be nice to have "QSL sent" and "QSL received" fields to be populated automatically with "N" when QSO is entered. Currently they are blank and to change them to "N" I have to either manually enter "N" or use "Edit QSL info". 73! Andrei, de ZL1TM |
|
Re: LOGGER32 FILE BACKUP
Mecozzi, Al
Geoff:
toggle quoted message
Show quoted text
Below is a comparison of the files I copy to my Iomega Zip drive and the files that are contained in the Logbook Zip and User Files Zip files produced by Logger32. In the column on the right, the files that are blank do not exist in the Logger32 zipped backup files. Also, below are some questions I have. I am not trying to be picky, I am just trying to understand the process. Thanks for bearing with me. THE FILES I COPY LOGGER32 ZIP FILES 01. ADIF.txt 01. ADIF.txt 02. ADIFBands.txt 02. ADIFBands.txt 03. ADIFModes.txt 03. ADIFModes.txt 04. ADIFSubModes.txt 04. ADIFSubModes.txt 05. Alias32.isd 05. Alias32.isd 06. Alias32.isf 06. Alias32.isf 07. Alias32.isl 07. 08. Alias32.ism 08. Alias32.ism 09. Arrlsect.db 09. Alias32.ism 10. BandMode32.db 10. BandMode32.db 11. ChildFormsOpen.ini 11. ChildFormsOpen.ini 12. Copy of Alias32.isd 12. 13. Copy of Alias32.isf 13. 14. Copy of Alias32.isl 14. 15. Copy of Alias32.ism 15. 16. Copy Arrlsect.db 16. 17. Copy of ChildFormsOpen.ini 17. 18. Copy of Country32.isd 18. 19. Copy of Country32.isf 19. 20. Copy of Country32.isl 20. 21. Copy of Country32.ism 21. 22. Copy of County32.isd 22. 23. Copy of County32.isf 23. 24. Copy of County32.isl 24. 25. Country32.isd 25. Country32.isd 26. Country32.isf 26. Country32.isf 27. Country32.isl 27. 28. Country32.ism 28. Country32.ism 29. County32.isd 29. County32.isd 30. County32.isf 30. County32.isf 31. County32.isl 31. 32. County32.ism 32. County32.ism 33. Cw.ini 33. Cw.ini 34. IOTA32.isd 34. IOTA32.isd 35. IOTA32.isf 35. IOTA32.isf 36. IOTA32.isl 36. 37. IOTA32.ism 37. IOTA32.ism 38. IOTAIsland32.isd 38. IOTAIsland32.isd 39. IOTAIsland32.isf 39. IOTAIsland32.isf 40. IOTAIsland32.isl 40. 41. IOTAIsland32.ism 41. IOTAIsland32.ism 42. Logbook32.isd 42. Logbook32.isd 43. Logbook32.isf 43. Logbook32.isf 44. Logbook32.isl 44. 45. Logbook32.ism 45. Logbook32.ism 46. Logger32.ini 46. Logger32.ini 47. Mmtty.ini 47. Mmtty.ini 48. Offset32.isd 48. Offset32.isd 49. Offset32.isf 49. Offset32.isf 50. Offset32.isl 50. 51. Offset32.ism 51. Offset32.ism 52. Stats32.isd 52. 53. Stats32.isf 53. 54. Stats32.isl 54. 55. Stats32.ism 55. 56. UserPara.ini 56. UserPara.ini TOTAL 56 FILES TOTAL 32 FILES I have the following questions: 1. The help files and frequent mentions on the reflector state that all four of the ISD, ISF, ISL and ISM files should be kept together. Why are the ISL misssing from from the Logbook Zip and User Files Zip files? 2. Is it not necessary to copy the Copy of xxxxxx files? Apparently not as they are contained in the User Files Zip file. 3. Whay are the Stats32.xxx files not included in the User Files Zip file? 73...Al...WA8LBZ amecozzi@... ----- Original Message -----
From: Geoff Anderson To: hamlogger@... Sent: Tuesday, June 17, 2003 7:32 PM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP Al, I don't know that you are missing anything. What I'm interested in is the list of files you are recording which Logger32 doesn't. Now I know I should be in a position to do this comparison, but the truth is that I have so many files in my logger directory from trying to sort out other peoples problems that I don't have a "virgin" set either in the main directory or in the zipped files. The only way I could get back to this is to clear everything out and do a re-install - and I really don't want to do that at the moment!! So if you could tell me what the differences are please, I can then tell you if you need to save them of not. If Bob has forgotten to include some essential files, then I would like to know and the matter can be corrected. 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message ----- From: "Mecozzi, Al" <amecozzi@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 8:43 PM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > Geoff: > > When I use the Zip Logbook and Zip User Files icons I get two zip files. The file for the Logbook contains 3 files. Is the ISL not needed? The file for the User Files contains 30 files. For a total of 33 files. When I copy all the ISD, ISL, ISM, INI and DB files, I get a total of 52 files. Maybe it is not necessary to copy the COPY OF XXXX.ISL, etc. files. What am I missing here? > > 73...Al...WA8LBZ > ----- Original Message ----- > From: Geoff Anderson > To: hamlogger@... > Sent: Tuesday, June 17, 2003 1:30 PM > Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > > > Al, > > Are you SERIOUSLY telling me that on your machine if you use the two icons > for backing up the log and other important files that these are NOT > zipped???? Are you absolutely sure about this??? Are you looking in the > right place for them? You should generate two Zip files, one containing > three log files (.isf, .ism and .isd) and the other all the INI and config > type files as well as the various databases. > > I would be grateful if you would check again please > > 73 de Geoff > G3NPA > Geoff.Anderson@... > > > > ----- Original Message ----- > From: "Mecozzi, Al" <amecozzi@...> > To: <hamlogger@...> > Sent: Tuesday, June 17, 2003 12:51 AM > Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > > > > Geoff: > > > > The files are not zipped but are copied as is. Secondly, unless I missed > something when I used the icons you mentioned, I did not get all the files I > am now copying. That is precisely why I use the procedure that I do. To > insure that I backup all necessary files. Thanks for the prompt reply. Keep > the good work. > > > > 73...Al...WA8LBZ > > ----- Original Message ----- > > From: Geoff Anderson > > To: hamlogger@... > > Sent: Monday, June 16, 2003 5:47 PM > > Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > > > > > > I assume you realise that the first two icons on the icon bar will do > this > > for you! Ok - so the files are Zipped - but apart from that everything > you > > need to keep is catered for here. > > > > 73 de Geoff > > G3NPA > > Geoff.Anderson@... > > > > > > > > ----- Original Message ----- > > From: "Mecozzi, Al" <amecozzi@...> > > To: <hamlogger@...> > > Sent: Monday, June 16, 2003 5:05 AM > > Subject: [hamlogger] LOGGER32 FILE BACKUP > > > > > > > For my convenience I have generated a batch file to run when I click a > > Logger32 Backup icon on the desktop. It copies all ISD, ISF, ISL, ISM, > INI > > and DB files to my Iomega Zip drive. This is my preferred method of > backing > > up the Logger 32 files. My question is, Are there any other files that > > should be backed up (copied in my case) besides the ones specified > above? > > > > > > 73...Al...WA8LBZ > > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > hamlogger-unsubscribe@... > > > > > > Visit these sites for Logger and other downloads: > > > and... > > > > > > Asst. Moderator: dwmcclure@... > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > > > > > > > > > > > > > > > Yahoo! Groups Sponsor > > > > > > > > To unsubscribe from this group, send an email to: > > hamlogger-unsubscribe@... > > > > Visit these sites for Logger and other downloads: > > and... > > > > Asst. Moderator: dwmcclure@... > > > > > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > hamlogger-unsubscribe@... > > > > Visit these sites for Logger and other downloads: > > and... > > > > Asst. Moderator: dwmcclure@... > > > > > > > > Your use of Yahoo! Groups is subject to > > > > > > > Yahoo! Groups Sponsor > > > > To unsubscribe from this group, send an email to: > hamlogger-unsubscribe@... > > Visit these sites for Logger and other downloads: > and... > > Asst. Moderator: dwmcclure@... > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > To unsubscribe from this group, send an email to: > hamlogger-unsubscribe@... > > Visit these sites for Logger and other downloads: > and... > > Asst. Moderator: dwmcclure@... > > > > Your use of Yahoo! Groups is subject to > > > Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Re: Automatic filling ?
Hal Miller
Sorry misunderstood the question
toggle quoted message
Show quoted text
Hal, KB1ZQ -----Original Message-----
From: Didier Juges [mailto:didier@...] Sent: Tuesday, June 17, 2003 8:07 PM To: hamlogger@... Subject: [hamlogger] RE: Automatic filling ? Yes and yes, I agree, but that was not the question I believe. The question was about populating these fields for QSOs ALREADY IN THE LOG and which do not have these fields populated. I do not use the CD, but I sometimes operate battery in the yard with my FT-817 and the laptop on battery too, without an internet connection. It would be nice to be able to populate these fields after the fact, when I am back in the shack and the computer is hooked up to the network and the internet. 73, Didier/KO4BB At 05:42 PM 6/17/2003 -0500, you wrote: >Didier, > >If the field such as Address, State, County, Grid Square and a few others do >populate if the info is there from previous QSOs. > >I do not use QRZ CD but do use QRZ.com (DSL connection) and most of these >populate upon entry of a callsign into the Logbook entry window, you will >need to check your options for the QRZ CD. > >Hal, KB1ZQ Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Re: Automatic filling ?
Didier Juges
Yes and yes, I agree, but that was not the question I believe.
toggle quoted message
Show quoted text
The question was about populating these fields for QSOs ALREADY IN THE LOG and which do not have these fields populated. I do not use the CD, but I sometimes operate battery in the yard with my FT-817 and the laptop on battery too, without an internet connection. It would be nice to be able to populate these fields after the fact, when I am back in the shack and the computer is hooked up to the network and the internet. 73, Didier/KO4BB At 05:42 PM 6/17/2003 -0500, you wrote:
Didier, |
|
Re: LOGGER32 FILE BACKUP
Geoff Anderson
Al,
toggle quoted message
Show quoted text
I don't know that you are missing anything. What I'm interested in is the list of files you are recording which Logger32 doesn't. Now I know I should be in a position to do this comparison, but the truth is that I have so many files in my logger directory from trying to sort out other peoples problems that I don't have a "virgin" set either in the main directory or in the zipped files. The only way I could get back to this is to clear everything out and do a re-install - and I really don't want to do that at the moment!! So if you could tell me what the differences are please, I can then tell you if you need to save them of not. If Bob has forgotten to include some essential files, then I would like to know and the matter can be corrected. 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message -----
From: "Mecozzi, Al" <amecozzi@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 8:43 PM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP Geoff:The file for the Logbook contains 3 files. Is the ISL not needed? The file for the User Files contains 30 files. For a total of 33 files. When I copy all the ISD, ISL, ISM, INI and DB files, I get a total of 52 files. Maybe it is not necessary to copy the COPY OF XXXX.ISL, etc. files. What am I missing here? icons for backing up the log and other important files that these are NOTthe right place for them? You should generate two Zip files, onecontaining three log files (.isf, .ism and .isd) and the other all the INI andconfig type files as well as the various databases.missed something when I used the icons you mentioned, I did not get all thefiles I am now copying. That is precisely why I use the procedure that I do. ToKeep the good work.do thiseverything youclick a > Logger32 Backup icon on the desktop. It copies all ISD, ISF, ISL,ISM, INIthat > should be backed up (copied in my case) besides the ones specified > |
|
Re: Request for addition
Geoff Anderson
John,
toggle quoted message
Show quoted text
I don't think I'm quite in tune with you on this one John. What comments are you wanting to add during an ADI load?. Are you referring to the Logger16 NOTES? If so, there is a utility for converting Logger16 "notes" to Logger32 format called ConvertNotesToLogger32.exe. Now my memory is a little lacking on this one but I think this did not get sent out with the original set of files - but I believe you can grab a copy from the reflector files area if you need it. Does this cover you question? If not, try me again. 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message -----
From: "John" <vk4wpx@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 10:18 PM Subject: Re: [hamlogger] Request for addition Hello Geoff... to be honest, I have imported several logs and until youstill stands..furtherHave you actually looked at the ADI import? If you set about loading anADIimport, after you have defined the file to use, you will see a windowthatnot only shows the actual entry BUT allows you to import CONTEST logs...Itis the lowest of the three options. When you select this option a recordedwindow opens allowing you to enter the contest name ( which gets incomment' -the Contest_ID column of the log. Iaskshave noticed that logger32 does not have this (if it does, it never importedreinstatedme when I import).... Would it be possible to have this feature'contest_id'and additionally, where an imported ADIF log does not have acould logger32 ask you for this info. (I have recently several contest logs from Writelog and would have liked to either put |
|
Re: Setup
Geoff Anderson
I have a couple of questions here:-
toggle quoted message
Show quoted text
1) Logger32 was (and is) being developed on a Win98SE system so the included files would be from that era. Now what its the announcement actually saying/ Is it the the files you have already are more up to date that those provided or is it the other way round? If your files are more current, then keep them. 2) You say that when you run setup AGAIN .... Why do this? Is Logger32 not running for you - and if so, what is the problem? 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message -----
From: "Gary and Julie Burow" <vk4gcb@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 10:51 PM Subject: [hamlogger] Setup I have had Logger 32 running under Windoze 2000 successfully.Unfortunately I had a hard drive problem and had to re-install everything. Now, Setupit gives the same result. Am I doing something wrong? |
|
Setup
Gary and Julie Burow
I have had Logger 32 running under Windoze 2000 successfully. Unfortunately
I had a hard drive problem and had to re-install everything. Now, Setup tells me that some of my System files are out of date and offers to update them if I select yes then shut down and restart. when I run Setup again, it gives the same result. Am I doing something wrong? Gary |
|
Re: Automatic filling ?
Hal Miller
Didier,
toggle quoted message
Show quoted text
If the field such as Address, State, County, Grid Square and a few others do populate if the info is there from previous QSOs. I do not use QRZ CD but do use QRZ.com (DSL connection) and most of these populate upon entry of a callsign into the Logbook entry window, you will need to check your options for the QRZ CD. Hal, KB1ZQ -----Original Message-----
From: Andrei [mailto:zl1tm@...] Sent: Monday, June 16, 2003 3:04 AM To: hamlogger@... Subject: Re: [hamlogger] Re: Automatic filling ? Hi Didier, Well, I must be wrong, but I understood the original question as how to automatically populate the fields if the contact was in the log already. Sorry for causing the confusion. I personnally do not use QRZ lookup, as it doesn't give the name in 90% of the callsigns (just the first letter of the name), I don't really care about street address and not all the callsigns are in QRZ database. 73! Andrei, de ZL1TM ----- Original Message ----- From: "Didier Juges" <didier@...> To: <hamlogger@...> Sent: Monday, 16 June 2003 5:02 a.m. Subject: [hamlogger] Re: Automatic filling ? > Andrei, > > The question as I understand it was "how to retroactively (after the fact) > update QSO's that are already in the logbook but don't have the address > field filled up". For instance, I work a number of stations while portable > (no internet and no QRZ.COM). Once back in the shack, I would like to > connect the PC to the internet and batch update these QSOs automatically > from QRZ.COM. That would be a nice feature, similar to what you do to flag > for QSLs. > > 73, > Didier/KO4BB > > ----- Original Message ----- > From: "Andrei" <zl1tm@...> > To: <didier@...> > Sent: Saturday, June 14, 2003 5:20 PM > Subject: [personal] Re: [hamlogger] Automatic filling ? > > > > Hi Didier, > > > > In logbook entry window right mouse click -->Setup --> Set up QSO mask. > > Select what you want and click Apply. > > > > Is that what you want? > > > > 73! > > Andrei, de ZL1TM > > > > > > ----- Original Message ----- > > From: "Didier Juges" <didier@...> > > To: <hamlogger@...> > > Sent: Sunday, 15 June 2003 12:33 a.m. > > Subject: Re: [hamlogger] Automatic filling ? > > > > > > > I asked that question before and the answer was no. > > > I am not sure if there are any plans to add that feature, but it sure > > would > > > be nice. > > > > > > Right now, when I want to do that, I create a new QSO with the same > > station > > > then change the date/time/frequency to match the old QSO, then delete > the > > > old QSO. I found it faster and less error prone than copying the name > and > > > address fields into the old QSO. > > > > > > Didier/KO4BB > > > > > > At 12:18 PM 06/14/2003 +0200, you wrote: > > > >Hi again. > > > >Sorry for my multiple questions... > > > >I'd like to know if it is possible, if a contact were already done, to > > > >automatically fill the already informed fields like Name or QTH without > > > >using autolookup feature. > > > >-- > > > >F8DQL - UFT 1116 > > > >K2/100 #3249 > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > hamlogger-unsubscribe@... > > > > > > Visit these sites for Logger and other downloads: > > > and... > > > > > > Asst. Moderator: dwmcclure@... > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > hamlogger-unsubscribe@... > > Visit these sites for Logger and other downloads: > and... > > Asst. Moderator: dwmcclure@... > > > > Your use of Yahoo! Groups is subject to > > > Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Re: Request for addition
John
Hello Geoff... to be honest, I have imported several logs and until you
mentioned it, I never even noticed the little box that you click on for 'contest logs'. Thank you for pointing this out... However, if this is not another thing that I have missed, my request for adding comments still stands.. Have you actually looked at the ADI import? If you set about loading anADI import, after you have defined the file to use, you will see a windowthat not only shows the actual entry BUT allows you to import CONTEST logs...It is the lowest of the three options. When you select this option a furtherin the Contest_ID column of the log.I reinstatedhave noticed that logger32 does not have this (if it does, it never asks 'contest_id'and additionally, where an imported ADIF log does not have a could logger32 ask you for this info. (I have recently imported |
|
Re: Mode
K8NKE
that is Logger 16 but version 7.09
At 11:10 AM 6/17/03 -0700, you wrote: No I am not using logger16, I am using Logger 7.09. ---------- --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (). Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/03 |
|
Re: LOGGER32 FILE BACKUP
Mecozzi, Al
Geoff:
toggle quoted message
Show quoted text
When I use the Zip Logbook and Zip User Files icons I get two zip files. The file for the Logbook contains 3 files. Is the ISL not needed? The file for the User Files contains 30 files. For a total of 33 files. When I copy all the ISD, ISL, ISM, INI and DB files, I get a total of 52 files. Maybe it is not necessary to copy the COPY OF XXXX.ISL, etc. files. What am I missing here? 73...Al...WA8LBZ ----- Original Message -----
From: Geoff Anderson To: hamlogger@... Sent: Tuesday, June 17, 2003 1:30 PM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP Al, Are you SERIOUSLY telling me that on your machine if you use the two icons for backing up the log and other important files that these are NOT zipped???? Are you absolutely sure about this??? Are you looking in the right place for them? You should generate two Zip files, one containing three log files (.isf, .ism and .isd) and the other all the INI and config type files as well as the various databases. I would be grateful if you would check again please 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message ----- From: "Mecozzi, Al" <amecozzi@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 12:51 AM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > Geoff: > > The files are not zipped but are copied as is. Secondly, unless I missed something when I used the icons you mentioned, I did not get all the files I am now copying. That is precisely why I use the procedure that I do. To insure that I backup all necessary files. Thanks for the prompt reply. Keep the good work. > > 73...Al...WA8LBZ > ----- Original Message ----- > From: Geoff Anderson > To: hamlogger@... > Sent: Monday, June 16, 2003 5:47 PM > Subject: Re: [hamlogger] LOGGER32 FILE BACKUP > > > I assume you realise that the first two icons on the icon bar will do this > for you! Ok - so the files are Zipped - but apart from that everything you > need to keep is catered for here. > > 73 de Geoff > G3NPA > Geoff.Anderson@... > > > > ----- Original Message ----- > From: "Mecozzi, Al" <amecozzi@...> > To: <hamlogger@...> > Sent: Monday, June 16, 2003 5:05 AM > Subject: [hamlogger] LOGGER32 FILE BACKUP > > > > For my convenience I have generated a batch file to run when I click a > Logger32 Backup icon on the desktop. It copies all ISD, ISF, ISL, ISM, INI > and DB files to my Iomega Zip drive. This is my preferred method of backing > up the Logger 32 files. My question is, Are there any other files that > should be backed up (copied in my case) besides the ones specified above? > > > > 73...Al...WA8LBZ > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > hamlogger-unsubscribe@... > > > > Visit these sites for Logger and other downloads: > > and... > > > > Asst. Moderator: dwmcclure@... > > > > > > > > Your use of Yahoo! Groups is subject to > > > > > > > > > Yahoo! Groups Sponsor > > > > To unsubscribe from this group, send an email to: > hamlogger-unsubscribe@... > > Visit these sites for Logger and other downloads: > and... > > Asst. Moderator: dwmcclure@... > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > > > To unsubscribe from this group, send an email to: > hamlogger-unsubscribe@... > > Visit these sites for Logger and other downloads: > and... > > Asst. Moderator: dwmcclure@... > > > > Your use of Yahoo! Groups is subject to > > Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
Re: Mapping data path to other pc
Geoff Anderson
AH - this is something I have not tried before but having now had a go I
toggle quoted message
Show quoted text
find that it works ok - for me at least! Running Logger32 on one machine and mapping a drive from the other across my network which contains a valid logbook set ( of four files) then it works just fine.. What are we doing differently? 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message -----
From: "truckcamper" <truckcamper@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 10:22 AM Subject: [hamlogger] Mapping data path to other pc I was wondering whether it is possible to use a different PC for logfiles. I have a number of PC's, and would like to use one particular PC for thea different PC on my network, but Logger seems to choke. Is it notpossible?
|
|
Re: MixW to LOGGER32 Interface
Geoff Anderson
Until MixW places a band field a lot of logging programsNo - not so. Logger32 does accept Mix2.xx files ( just tried it). The initial release version of Logger32 you have may not do so BUT the version I have under test certainly DOES accept Mix ADI files.. (even though the ADI file does not have a BAND field). A quote from the list of changes made - recently put onto this reflector stated:- ADIF import - now includes a calculator to determine the BAND from the frequency if the BAND field does not exist in the imported file. So - it's just a question of waiting for the next beta release. 73 de Geoff G3NPA Geoff.Anderson@... |
|
Re: Mode
john walsh
No I am not using logger16, I am using Logger 7.09.
Thanks for the input and info John WA1LSH Peter Eckersberger <oe3epw@...> wrote: Hi John, If I'm not mistaken you are still talking about "LOGGER16". In this case you have to go to "Utilities > Band/Mode" and make the changes in the BAND PLAN. 73 de Pez, OE3EPW Andrew J O'Brien schrieb: Click on tools. select "edit bands/modes" , on the window that is Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: hamlogger-unsubscribe@... Visit these sites for Logger and other downloads: and... Asst. Moderator: dwmcclure@... Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. --------------------------------- Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! |
|
Re: LOGGER32 FILE BACKUP
Geoff Anderson
Al,
toggle quoted message
Show quoted text
Are you SERIOUSLY telling me that on your machine if you use the two icons for backing up the log and other important files that these are NOT zipped???? Are you absolutely sure about this??? Are you looking in the right place for them? You should generate two Zip files, one containing three log files (.isf, .ism and .isd) and the other all the INI and config type files as well as the various databases. I would be grateful if you would check again please 73 de Geoff G3NPA Geoff.Anderson@... ----- Original Message -----
From: "Mecozzi, Al" <amecozzi@...> To: <hamlogger@...> Sent: Tuesday, June 17, 2003 12:51 AM Subject: Re: [hamlogger] LOGGER32 FILE BACKUP Geoff:something when I used the icons you mentioned, I did not get all the files I am now copying. That is precisely why I use the procedure that I do. To insure that I backup all necessary files. Thanks for the prompt reply. Keep the good work. this for you! Ok - so the files are Zipped - but apart from that everythingyou need to keep is catered for here.INI and DB files to my Iomega Zip drive. This is my preferred method ofbacking up the Logger 32 files. My question is, Are there any other files thatabove? > > |
to navigate to use esc to dismiss