开云体育

Hello, Asking for your assistance in resolving Pfx?? error, see attached. Restarting L32 and or PC (W10) doesn't cure the problem. Thank you 73 Avi 4X1WQ [image: image.png]

For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.

I connect to the VE7CC cluster, using the internal telnet and have no problems. Was working fine the other day anyway.

Had the same problem changed to another cluster all ok and yet to change back Ron G6GA

Mark, I'd suggest using the VE7CC user program as a front end, then get L32 to connect to VE7CC. 73' Pete, N5KD.

Check with your Internet service provider, maybe they have started blocking telnet due to it being insecure. Good luck, N0NC

Hi all Has anyone had any issues with losing telnet connection using logger 32 ? I have tried various servers but still cannot get a connection on the bottom task bar i have previously never had any

Isn't he STATE field in the Logbook Entry automagically all CAPS? You are in NJ, not Nj. SeventyThree(s).

I've forgotten the way to get the entry in the STATE field to automatically capitalize like the first letter in the name and QTH fields. Also, FWIW a recent Win 10 update required that I run Logger32

Bob, Yes, they are at the end of the ADIF file. Thanks again!! 73, Todd N4JRZ

Yes, manually add the missing Qs. Are they listed at the end of the ADIF file you made? SeventyThee(s).

Bob, Thanks, that seemed to work with the exception that my log now is missing my last 5 QSOs. My guess is that I should manually add the QSOs now? Thanks for your help!!! 73, Todd N4JRZ

First things first -- Make an ADIF backup of all your logbooks, and hide them somewhere safe off the computer. From your description you have either inadvertently changer OPERATOR name in your

I have worked HD8G a total of 20 times. Previously all of my QSOs with HD8G were showing up in the previous QSOs window when I typed the call sign into the QSO window. Now as of about 1 hour ago, only

Roger that!

From the manual: [image: image.png] So, in case of CAT troubles, it's worth searching the manual for your radio model. It may not be purrrrrfect but it should work OK. 73 Gary ZL2iFB

Because the command list must be same not just the hardware config. <andreas.paulick@...> wrote:

Good job. 73.

Hi, the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface

Well done, Bob. I'd prefer to be able to slide the input window out of the main window. 73 Chris F5ind