开云体育

Thanks Dirk on4ct

*** SOLVED *** I found a post on-line from 2018. I had to change a Win10 setting! A setting I did not know even existed!! Search in Windows settings for *Microphone Privacy Settings* Turn on *Allow

Fixes/changes for this release include: Fixed a bug on the WAZ award window where Confirmed/Granted zones were not showing correctly. If the Slave port is configured for Kenwood radio, the FR0;

Sounds to me like the PC periodically needs to take a time out to page fault, swap memory, or do some other high priority housekeeping. Have you tries using MMVari set to RTTY? What is the % memory

Hi Group, Just curious to know... Anyone who have experienced that the software is lagging...?? I have the latest version of the software, and when I'm running RTTY with the MMTTY engine embedded, I

Observant as usual Bob. 4SEC is a bit slow but there are times when its nice to have it slow, like when it keeps interrupting something. normally I set it to 1sec. Damian

Polling looks a little slow to me. SeventyThree(s).

Screenshot of config for my FTdx1200 73 Damian

Hi Link? at top of page seems to be broken but the one below may be helpfull. https://radioddity.s3.amazonaws.com/Radioddity%20-%20Xiegu%20G90,%20CAT%20and%20Digital%20modes%20V1.0_20210623.pdf I

Hi, you can try connecting to my cluster. I'm using it with logger32 and never had any issues. dxcluster.iz2lsc.eu port: 7373 Andrea iz2lsc [email protected]> ha scritto:

Enjoy.

Hello Bob, Just wanted to notify you that, suggested by you uninstall/reinstall Logger32 simply did the trick and completely cured the problem! Now all works as it should be. THANK YOU very much for

Thank you so much Bob for your support and advice. I will do it. 73 Avi 4X1WQ

Looks like you've done everything as suggested. Before you attempt to uninstall/reinstall Logger32, be sure to save all your logbooks safely in ADIF format. Check that all QSOs have been saved, and

[email protected]> wrote:

Hello Bob, I also check disk space, as you suggested, just forget to attach...... here it is: [image: image.png] [image: image.png] 73 Avi [email protected]> wrote:

Hello Bob, Following your suggestion I performed *CHKDSK c: /f - *I hope and assume I did it correctly: *a) Command Prompt with Admin privileges.* [image: image.png] *STEP 1*: Restarted the PC, and on

Thanks Damien. Will be noted in the manual: [image: image.png] 73 Gary ZL2iFB <http://www.g4ifb.com> Logger32 <https://www.logger32.net/> beater/tester & scribe

A bit more grist for the mill. I have 3 sound cards on my Win10 machine. One is built-in and the other include 2 external USB types (1 for the Navigator interface and a 2nd for CW Skimmer). As

First let me state that I do not think this is a Logger32 issue! I thought I'd poll the group for some advice! I have been using a Navigator interface in the same configuration for digital modes