Re: Shift or CTL Click on DX Spot
I meant IC-7300, is there an IC-7000?. Maybe IC-7xxx covers all the bases.
?
If there is something special about the IC-7610 CAT control that warrants it's own code, I'd be happy to add it. Other than that, use a compatible IC-7xxx setup (whatever that maybe). 73.
On 04/20/2025 6:08 PM EDT John Munton - G7SSE via groups.io <johng7sse@...> wrote:
?
?
Bob did you mean the IC-7000 rather than 73000?
?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
?
73
John - G7SSE
?
?
------ Original Message ------
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
?
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
?
?
--
73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
Bob did you mean the IC-7000 rather than 73000?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
73 John - G7SSE
------ Original Message ------
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
-- 73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
|
Shift or CTL Click on DX Spot
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
|
Re: Display: Dark Mode for Logger32?
Bon.!!!
May the Force be with you!!! Little Padawan Hi?
toggle quoted message
Show quoted text
Le 20 avr. 2025 ¨¤ 13:20, Bob via groups.io <k4cy@...> a ¨¦crit?:
?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
<Screenshot 2025-04-20 192419.png>
|
Re: Display: Dark Mode for Logger32?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
|
Re: Display: Dark Mode for Logger32?
Hello Mike;? And everybody from France.
Personally, all these modes, "dark", "sombre" or all these fashionable values, I don't see what this software can really bring to the table. If we consider the fact that we watch more radio or the cascade screen of full SDR, or "flex radio" type versions.
However, I'd happily admit that I'm not the ideal mind of today's radio amateur, who installs colored LED strips under their desk to brighten up the atmosphere... Oh, that's my opinion, even though no one asked me.... HI.. 73 chris f5ind.
toggle quoted message
Show quoted text
Le 20 avr. 2025 ¨¤ 11:28, Mike VK4DX via groups.io <sivcevic@...> a ¨¦crit?:
? Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
<Screenshot 2025-04-20 192419.png>
|
Re: Display: Dark Mode for Logger32?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
|
Hello Mark.
Try with sh/fdx/10
Fabi¨¢n
Malnero Maccari, EB1TR
toggle quoted message
Show quoted text
El 15 abr 2025, a las 16:06, Mark via groups.io <mark.g0mgx@...> escribi¨®:
Hi All
?
When I connect via telnet to my local cluster, as spots roll in automatically all is well, however, when I do a sh/dx/10 the
columns seem messed up:
?
<inline.0.part>
?
Anyone got any idea - RH6B came in as normal then the rest is the result of sh/dx/10. Clearly the callsigns are in the comment field and the rest is also out of bonk somehow.
?
Mark
G0MGX
|
I assume that you imported your logbook into Logger32 the records did not include a PFX field.(PFX being ADIF speak for WPX).?There's an option when importing an ADIF file to use the PFX field in the ADIF record or to use the default Logger32 WPX calculation.
?
I don't recall any batch feature/function that will fill in the blanks for you. SeventyThree(s).
On 04/19/2025 2:53 PM EDT Michal Horecky via groups.io <michal.om2dx@...> wrote:
?
?
Hi all,
?
another question .. Many of my PFX fields?are empty. How can I force Logger to fill the prefix in the column? from the callsign?
?
thanks in advance
?
Michal OM2DX
?
|
The solution is in the FAQ at the bottom of page 230 of the Logger32 User Manual, Michal.
Export your complete log as an ADIF, then import it into a fresh log, ticking the import option <Ignore PFX field> which tells Logger32 to ignore the [mostly empty] PFX field in your ADIF, calculating and filling it one QSO at a time.??
73 Gary? ?beater/tester &?
Honor Roll &? checker
PS? There are many such solutions in the manual.? It's worth searching there for whatever needs solving.? In respect of Logger32, that is.? The manual cannot solve climate change, ballistic wars or trade wars, unfortunately.?
On Sun, 20 Apr 2025 at 06:53, Michal Horecky via <michal.om2dx= [email protected]> wrote: Hi all,
another question .. Many of my PFX fields?are empty. How can I force Logger to fill the prefix in the column? from the callsign?
thanks in advance
Michal OM2DX
|
I know this is not answering your specific question, but I don't see the need to do it exactly the way you suggest. There might be a way to do it in L32, but I am not aware of why L32 doesn't show all prefixes in your example.
?
You could use this display to show all of the prefixes that you have worked.
?
?
And here is an example partial output showing the prefixes that you have worked by band.
?
?
?
--
Gerald, VE1DT
|
Hi all,
another question .. Many of my PFX fields?are empty. How can I force Logger to fill the prefix in the column? from the callsign?
thanks in advance
Michal OM2DX
|
Re: Worked/Confirmed window problem
It is possible that the window is opening, but is off the?screen, or hidden behind another window.? Look at section 6.9 (page 181) of the help file.
?
Click the column header on the Worked/Confirmed Window, then see if you can find the lost window.? SeventyThree(s).
On 04/18/2025 3:47 PM EDT Michal Horecky via groups.io <michal.om2dx@...> wrote:
?
?
Hi all,
?
seeking help how to fix the issue when clicking on mode icon in Worked/Confirmed window no popup window with worked/confirmed callsigns on that band shows up.
?
thanks for help
?
Michal OM2DX
?
|
Worked/Confirmed window problem
Hi all,
seeking help how to fix the issue when clicking on mode icon in Worked/Confirmed window no popup window with worked/confirmed callsigns on that band shows up.
thanks for help
Michal OM2DX
|
Does anyone in the group have an FTdx5000 working in conjunction with Fldigi using Rick's N2AMG gateway? I seem to be having some issues with changing frequencies from within Fldigi and having the rig follow and stay in PKT-USB mode. I've tried RIG-CAT, Hamlib and Fldigi control with no success. If you do, I'd love if you could share your settings with me.
?
Thanks, de Jim K2QB
|
Must be a problem here on one of my many computers... I tried a different PC and was able connect via TCP to my host. VPSE worked fine with Logger32!
Case closed!?
73 Tony
toggle quoted message
Show quoted text
On Apr 15, 2025, at 1:06 PM, Bob via groups.io <k4cy@...> wrote:
Mine are by Eltima (or something like that). SeventyThree(s). ?? <Noname.bmp> On 04/15/2025 12:48 PM EDT Anthony Buscaglia via groups.io <gihamgeek@...> wrote:? ?? ?? I¡¯ll test and see if I can connect locally.?I am using VSPE.?? ?? 73? Tony? On Apr 15, 2025, at 12:37 PM, Bob via groups.io <k4cy@...> wrote:? My PC has two virtual ports. They are visible to the CW Machine, and work as expected. They are however local ports, on this PC. SeventyThree(s).? On 04/15/2025 12:17 PM EDT Anthony Buscaglia via groups.io < gihamgeek@...> wrote: ??? ?? I am trying to open a remote port via VSPE.? I have it working fine on N1MM and with WK-Test.? ?? Using a connector and TCP-Client at the client end.? TCP server at the Host.? ?? When I try to start Logger32 I get a com port error.? ?? When I go to Task Mgr, CW Machine is listed as a backround task.? ?? I checked it CW Machine Config and it has the correct Port.? ?? Maybe Logger 32 doesn¡¯t like virtual COM ports?? ?? 73? Tony? K2NV? ?? ??
|
John Munton - G7SSE
Mark
jean-Christophe
Fabian/EB1TR
ZL2iFB
Gerald Boutin
Jim K2QB