开云体育

KISS. I took the easy way out. ADIFModes.txt has been removed from auto-update files. SeventyThree(s).

Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by

My sentiments too Bill. 73 Ian G4GIR

As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the

Cheers

Yes, be my guest. 73.

Bob Is it safe to Re-name a good working ***MyBandMode32 Database file to be used with a different configuration? i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I

as everybody and heir granny moves 1khz up, why the need for a macro? Your split shpuld be determined by the width and direction of the pile up? No?? Tom GM4FDM -- I thought growing old would take

Thanks Bob it wasn't in the text file must try harder 73 Ian G4GIR

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital

Found it. Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release

... and the BandPlan is a text file called MyBandPlan.db 73.

All your colors/fonts/etc. is inthe INI files. As far as logbooks are concerned, KISS and make an ADIF backup. 73.

Hi Bob I have just carried out a rebuild of the log, re-calculation and still no QSO'S shown in the Generic QSO window. Down loaded the full version. and installed it. Run the re-install and still no

Blush blush blush Op 24-7-2021 om 15:40 schreef Bob:

Thanks Bill. 73 Ian

The rotator debug window is empty Op 24-7-2021 om 15:40 schreef Bob:

Ian - Yes, works for all awards including IOTA. Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something! I'll try adding Q65 to

What do you see on the rotor debug window? Is there a Rotator seected (are you on a band with a rotator)? What is the text in the rotator pane in the lower status bar? What is the tooltip of the

Bob OK about the first one. I have to install Logsync. But about the rotator there is no error message, Com 3 is figured. Op 24-7-2021 om 15:21 schreef Bob: --