Re: Logger Radio Configuration for Yaesu FT-891
For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.
|
Re: Logger 32 telnet problem
I connect to the VE7CC cluster, using the internal telnet and have no problems. Was working fine the other day anyway.
|
Re: Logger 32 telnet problem
Had the same problem changed to another cluster all ok and yet to change back? Ron G6GA?
toggle quoted message
Show quoted text
On 24 Apr 2025, at 8:14?pm, n5kd via groups.io <n5kd@...> wrote:
?
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
toggle quoted message
Show quoted text
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Check with your Internet service provider, maybe they have started blocking telnet due to it being insecure.
?
Good luck, N0NC
?
|
Hi all
Has anyone had any issues with losing telnet connection using logger 32 ? I have tried various servers but still cannot get a connection on the bottom task bar i have previously never had any issues but now i am racking my brains and can¡¯t find an answer, it maybe firewall related but i have changed nothing on my laptop it also does not work on my back up laptop neither which also used to work with no problem
Any ideas welcome
Regards
Mark
M0UTD
|
Re: How to get the State field to automatically capitalize
Isn't he STATE field in the Logbook Entry automagically all CAPS? You are in NJ, not Nj. SeventyThree(s).
On 04/24/2025 10:18 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I've forgotten the way to get the entry in the STATE field to automatically capitalize like the first letter in the name and QTH fields.??
?
Also, FWIW a recent Win 10 update required that I run Logger32 as ADMIN and also in Win 8 Compatibility mode.? Just sayin.
?
Thanks,
?
Dave WB2PJH
?
|
How to get the State field to automatically capitalize
I've forgotten the way to get the entry in the STATE field to automatically capitalize like the first letter in the name and QTH fields.??
?
Also, FWIW a recent Win 10 update required that I run Logger32 as ADMIN and also in Win 8 Compatibility mode.? Just sayin.
?
Thanks,
?
Dave WB2PJH
?
|
Re: Call Sign Not Appearing In Previous QSOs Window
Bob,
?
Yes, they are at the end of the ADIF file. Thanks again!!
?
73,
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
Yes, manually add the missing Qs. Are they listed at the end of the ADIF file you made?? SeventyThee(s).
On 04/24/2025 9:48 AM EDT N4JRZ via groups.io <n4jrz@...> wrote:
?
?
Bob,?
?
Thanks, that seemed to work with the exception that my log now is missing my last 5 QSOs. My guess is that I should manually add the QSOs now? Thanks for your help!!!
?
73,
?
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
Bob,?
?
Thanks, that seemed to work with the exception that my log now is missing my last 5 QSOs. My guess is that I should manually add the QSOs now? Thanks for your help!!!
?
73,
?
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
First things first -- Make an ADIF backup of all your logbooks, and hide them somewhere safe off the computer.
?
From your description you have?either inadvertently changer OPERATOR name in your logbook, and the previous QSOs window is configured to show only QSOs with the current operator.
?
Or your logbook dataset is broken. Click TOOLS | DATABASE MAINTENANCE | REBUILD xxxx LOGBOOK. Logger32 will now attempt to reconstruct your logbook. This could take a while.
?
SeventyThree(s).
On 04/24/2025 1:12 AM EDT N4JRZ via groups.io <n4jrz@...> wrote:
?
?
I have worked HD8G a total of 20 times. Previously all of my QSOs with HD8G were showing up in the previous QSOs window when I typed the call sign into the QSO window. Now as of about 1 hour ago, only 2 QSOs are showing up in the previous QSOs window and these QSOs took place after all of the other QSOs stopped showing up in the previous QSOs window. All QSOs with HD8G still appear in the logbook, worked/confirmed window, and show with an X as being previously worked in the DX Spot window. All other call signs appear to show up in the previous QSOs windows as they should.?
?
Could anyone give me any ideas as to why these QSOs aren't showing up in the previous QSOs windows like the rest??
?
Thanks for your help.
?
73,
Todd
N4JRZ
|
Call Sign Not Appearing In Previous QSOs Window
I have worked HD8G a total of 20 times. Previously all of my QSOs with HD8G were showing up in the previous QSOs window when I typed the call sign into the QSO window. Now as of about 1 hour ago, only 2 QSOs are showing up in the previous QSOs window and these QSOs took place after all of the other QSOs stopped showing up in the previous QSOs window. All QSOs with HD8G still appear in the logbook, worked/confirmed window, and show with an X as being previously worked in the DX Spot window. All other call signs appear to show up in the previous QSOs windows as they should.?
?
Could anyone give me any ideas as to why these QSOs aren't showing up in the previous QSOs windows like the rest??
?
Thanks for your help.
?
73,
Todd
N4JRZ
|
Re: Logger Radio Configuration for Yaesu FT-891
toggle quoted message
Show quoted text
On 04/23/2025 3:52 PM EDT ZL2iFB via groups.io <zl2ifb@...> wrote:
?
?
So, in case of CAT troubles, it's worth searching the manual for your radio model.? ?It may not be purrrrrfect but it should work OK.
?
73
Gary?
?beater/tester &?
Honor Roll &? checker
Because the command list must be same not just the hardware config.
On Wed, Apr 23, 2025, 2:36 PM Andreas Paulick via <andreas.paulick= [email protected]> wrote:
Hi,
?
the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface parameters set are identical.
?
73, DL5CW
Andreas Paulick via <andreas.paulick= [email protected]> schrieb am Mi., 23. Apr. 2025, 17:33:
Hello everyone,
?
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
?
Thank you very much!
?
Andy, DL5CW
?
?
|
Re: Logger Radio Configuration for Yaesu FT-891
So, in case of CAT troubles, it's worth searching the manual for your radio model.? ?It may not be purrrrrfect but it should work OK.
73 Gary? ?beater/tester &?
Honor Roll &? checker
Because the command list must be same not just the hardware config.
On Wed, Apr 23, 2025, 2:36 PM Andreas Paulick via <andreas.paulick= [email protected]> wrote: Hi,
the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface parameters set are identical.
73, DL5CW
Andreas Paulick via <andreas.paulick= [email protected]> schrieb am Mi., 23. Apr. 2025, 17:33: Hello everyone,
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
Thank you very much!
Andy, DL5CW
|
Re: Logger Radio Configuration for Yaesu FT-891
Because the command list must be same not just the hardware config.
On Wed, Apr 23, 2025, 2:36 PM Andreas Paulick via <andreas.paulick= [email protected]> wrote: Hi,
the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface parameters set are identical.
73, DL5CW
Andreas Paulick via <andreas.paulick= [email protected]> schrieb am Mi., 23. Apr. 2025, 17:33: Hello everyone,
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
Thank you very much!
Andy, DL5CW
|
Re: Logger Radio Configuration for Yaesu FT-891
toggle quoted message
Show quoted text
On 04/23/2025 2:36 PM EDT Andreas Paulick via groups.io <andreas.paulick@...> wrote:
?
?
Hi,
?
the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface parameters set are identical.
?
73, DL5CW
Andreas Paulick via <andreas.paulick= [email protected]> schrieb am Mi., 23. Apr. 2025, 17:33:
Hello everyone,
?
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
?
Thank you very much!
?
Andy, DL5CW
?
?
|
Re: Logger Radio Configuration for Yaesu FT-891
Hi,
the problem is solved. Because there is no FT-891 in the radio interface in Logger32, I had set the FT-890 instead. However, the field must contain the Yaesu FT-991, although all other interface parameters set are identical.
73, DL5CW Andreas Paulick via <andreas.paulick= [email protected]> schrieb am Mi., 23. Apr. 2025, 17:33:
Hello everyone,
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
Thank you very much!
Andy, DL5CW
|
Re: Display: Dark Mode for Logger32?
Well done, Bob. I'd prefer to be able to slide the input window out of the main window. 73 Chris F5ind?
toggle quoted message
Show quoted text
Le 23 avr. 2025 ¨¤ 19:22, Bob via groups.io <k4cy@...> a ¨¦crit?:
?
On 04/20/2025 7:20 AM EDT Bob <k4cy@...> wrote:
?
?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
<Screenshot 2025-04-20 192419.png>
|
Re: Display: Dark Mode for Logger32?
On 04/20/2025 7:20 AM EDT Bob <k4cy@...> wrote:
?
?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
|
DamianM0BKV
Mark M0UTD
ZL2iFB
jean-Christophe