开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Hamlogger
  2. Messages
Expanded Topics Messages Polls
Date
Re: Shift or CTL Click on DX Spot

 

this is my working setup:
?
?
?
Re: Shift or CTL Click on DX Spot

 

Thanks aki

I've tried as IC-7800 but no luck!

I must be missing a setting somewhere, either in Logger32 or in the 7610.

Hope both you and your good lady are well.

73, John - G7SSE


------ Original Message ------
From "ja1nlx via groups.io" <ayoshida0205@...>
To "Hanlogger" <[email protected]>
Date 21/04/2025 09:58:35
Subject Re: [hamlogger] Shift or CTL Click on DX Spot

John
I am using ic7610 and set ic7800 as radio.
Shift+Clicking on DX spot moves VFO-B to his frequency.

73 de aki
JA1NLX

On 2025-04-21 月 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote:

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE

--
73, John - G7SSE
Re: Shift or CTL Click on DX Spot

 

John
I am using ic7610 and set ic7800 as radio.
Shift+Clicking on DX spot moves VFO-B to his frequency.

73 de aki
JA1NLX

On 2025-04-21 月 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote:

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE
Re: Shift or CTL Click on DX Spot

 

Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE
Re: Shift or CTL Click on DX Spot

 

I dont know what the difference in command sets is, but its likely to be in the detail.
?
As suggested, if I select the IC-7600 then all seems to work as expected - I hadn't realised I had the generic Icom selected.?
?
All working a treat - thanks as ever for the fast input :-)
?
Mark
G0MGX
Re: Shift or CTL Click on DX Spot

 

I meant IC-7300, is there an IC-7000?. Maybe IC-7xxx covers all the bases.
?
If there is something special about the IC-7610 CAT control that warrants it's own code, I'd be happy to add it. Other than that, use a compatible IC-7xxx setup (whatever that maybe). 73.

On 04/20/2025 6:08 PM EDT John Munton - G7SSE via groups.io <johng7sse@...> wrote:
?
?
Bob did you mean the IC-7000 rather than 73000?
?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
?
73
John - G7SSE
?
?
------ Original Message ------
From "Bob via groups.io" <k4cy@...>
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
?
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?

?

?


--
73, John - G7SSE

Re: Shift or CTL Click on DX Spot

 

Bob did you mean the IC-7000 rather than 73000?

Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?

73
John - G7SSE


------ Original Message ------
From "Bob via groups.io" <k4cy@...>
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot

... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?


--
73, John - G7SSE
Re: Shift or CTL Click on DX Spot

 

... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).

On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?
Re: Shift or CTL Click on DX Spot

 

Here's the picture again
?
?
SeventyThree(s)

On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?
Re: Shift or CTL Click on DX Spot

 

Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?

On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.

On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?

?

?
Re: Shift or CTL Click on DX Spot

 

That really was supposed to be shift click.


On Sun, 20 Apr 2025, 15:53 Mark via , <mark.g0mgx=[email protected]> wrote:
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
Shift or CTL Click on DX Spot

 

Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
Re: Display: Dark Mode for Logger32?

 

开云体育

Bon.!!!

May the Force be with you!!!
Little Padawan
Hi?

Le 20 avr. 2025 à 13:20, Bob via groups.io <k4cy@...> a écrit?:

?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that’s indeed the case.

<Screenshot 2025-04-20 192419.png>
Re: Display: Dark Mode for Logger32?

 

There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).

On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that’s indeed the case.

Re: Display: Dark Mode for Logger32?

 

开云体育


Hello Mike;?
And everybody from France.

Personally, all these modes, "dark", "sombre" or all these fashionable values, I don't see what this software can really bring to the table. If we consider the fact that we watch more radio or the cascade screen of full SDR, or "flex radio" type versions.

However, I'd happily admit that I'm not the ideal mind of today's radio amateur, who installs colored LED strips under their desk to brighten up the atmosphere...
Oh, that's my opinion, even though no one asked me.... HI..
73 chris f5ind.

Le 20 avr. 2025 à 11:28, Mike VK4DX via groups.io <sivcevic@...> a écrit?:

?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that’s indeed the case.

<Screenshot 2025-04-20 192419.png>
Re: Display: Dark Mode for Logger32?

 

Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that’s indeed the case.

Re: DX Spot Blues

 

开云体育

Hello Mark.

Try with sh/fdx/10

Fabián Malnero Maccari, EB1TR

El 15 abr 2025, a las 16:06, Mark via groups.io <mark.g0mgx@...> escribió:

Hi All
?
When I connect via telnet to my local cluster, as spots roll in automatically all is well, however, when I do a sh/dx/10 the columns seem messed up:
?
<inline.0.part>
?
Anyone got any idea - RH6B came in as normal then the rest is the result of sh/dx/10. Clearly the callsigns are in the comment field and the rest is also out of bonk somehow.
?
Mark
G0MGX
Re: recalculate Prefixes

 

I assume that you imported your logbook into Logger32 the records did not include a PFX field.(PFX being ADIF speak for WPX).?There's an option when importing an ADIF file to use the PFX field in the ADIF record or to use the default Logger32 WPX calculation.
?
I don't recall any batch feature/function that will fill in the blanks for you. SeventyThree(s).

On 04/19/2025 2:53 PM EDT Michal Horecky via groups.io <michal.om2dx@...> wrote:
?
?
Hi all,
?
another question .. Many of my PFX fields?are empty. How can I force Logger to fill the prefix in the column? from the callsign?
?
thanks in advance
?
Michal OM2DX
?
image.png

Re: recalculate Prefixes

 

The solution is in the FAQ at the bottom of page 230 of the Logger32 User Manual, Michal.

Export your complete log as an ADIF, then import it into a fresh log, ticking the import option <Ignore PFX field> which tells Logger32 to ignore the [mostly empty] PFX field in your ADIF, calculating and filling it one QSO at a time.??

73
Gary?
?beater/tester &?
Honor Roll &? checker


PS? There are many such solutions in the manual.? It's worth searching there for whatever needs solving.? In respect of Logger32, that is.? The manual cannot solve climate change, ballistic wars or trade wars, unfortunately.?



On Sun, 20 Apr 2025 at 06:53, Michal Horecky via <michal.om2dx=[email protected]> wrote:
Hi all,

another question .. Many of my PFX fields?are empty. How can I force Logger to fill the prefix in the column? from the callsign?

thanks in advance

Michal OM2DX

image.png
Re: recalculate Prefixes

 

I know this is not answering your specific question, but I don't see the need to do it exactly the way you suggest. There might be a way to do it in L32, but I am not aware of why L32 doesn't show all prefixes in your example.
?
You could use this display to show all of the prefixes that you have worked.
?
?
And here is an example partial output showing the prefixes that you have worked by band.
?
?
?
--
Gerald, VE1DT
261 - 280 of 98178