Re: COMport: Band tracking data
Hi,
I need Your expertise on the Slave port set-up,?because I feel something I may have set incorrectly.? I have not yet connected?the amplifier to?the port, so its response to the commands is still unknown to me.
The Slave port set-up is as follows:
It resulted in following the frequency changes of VFO A:
and it is how the radio port has been configured:
My questions:
1. Should?  ?show the frequency?data? 2. Is there a way to forward frequency data to the slave port ? ? while using WSJT-x connected to Logger32 via the UDP port and the Radio-port closed, ? ? please?
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 21:32:55
Temat Re[2]: [hamlogger] COMport: Band tracking data
Big thanks, Bob!
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
FYI: CheckSpot ver4.01 available now
|
Re: COMport: Band tracking data
Big thanks, Bob!
Best regards, Alec
------ Wiadomo?? oryginalna ------
Data 15.03.2025 18:24:19
Temat Re: [hamlogger] COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
Re: COMport: Band tracking data
... or, if your amplifier doesn't/cant read CAT frequency commands, then you could use the serial port antenna switch which allows you to program whatever serial data your amplifier needs. SeventyThree(s).
On 03/15/2025 12:32 PM EDT n5kd <n5kd@...> wrote:
?
?
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?
Search for ¡°slave¡± in the help file.
73¡¯ Pete, N(KD.?
Sent from my mobile
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
?
Hi,
?
I had been often asked about that,?and now,?
I am facing the question myself:
?
How to get the band data out from Logger32, so that it can be used for an amplifier
to follow the band the Radio/Logger32 is on?
?
Naturally, getting that directly from the radio is not possible?as there is no such an option,?
so the only way to make it is using a PC's COMport.
?
Perhaps there is some kind of bridge-software or so,
please?
?
Best regards,
Alec SP2EWQ
?
?
?
|
Re: COMport: Band tracking data
Pete,
thank You very much indeed!
It is a 15 pos. D-Sub on the Amplifier?as the Amp can use?some five or six?serial data formats. I have already prepared a COMport-D-Sub interface cable for a Kenwood protocol, which I considered most commonly used on amplifiers.
So, I need to test that configuration...
Big thanks, again, for the hint...
Best regards, Alec?
------ Wiadomo?? oryginalna ------
Data 15.03.2025 17:32:14
Temat Re: [hamlogger] COMport: Band tracking data
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.?Search for ¡°slave¡± in the help file. 73¡¯ Pete, N(KD.? Sent from my mobile On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
Re: COMport: Band tracking data
If your amplifier can read RS232 commands, then Logger32 has a slave port that can pass the CAT commands out on another COM port.? Search for ¡°slave¡± in the help file. 73¡¯ Pete, N(KD.?
toggle quoted message
Show quoted text
On Mar 15, 2025, at 11:26, Alec SP2EWQ via groups.io <aleksander.otulak@...> wrote:
?
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
COMport: Band tracking data
Hi,
I had been often asked about that,?and now,? I am facing the question myself:
How to get the band data out from Logger32, so that it can be used for an amplifier to follow the band the Radio/Logger32 is on?
Naturally, getting that directly from the radio is not possible?as there is no such an option,? so the only way to make it is using a PC's COMport.
Perhaps there is some kind of bridge-software or so, please?
Best regards, Alec SP2EWQ
|
L32 LogSync feature request, QO-100 Dx Club upload
Hello Rick
Sorry for posting this question a second time (first time on your website), but I thought this place might be more suitable for a possible discussion... if you allow it.
I am a short time member of the QO-100 Dx Club and I found a way to automatically upload QSOs to the club website, just like I do on LOTW, QRZ etc. There is an API on the qo100dx.club website that could do this. Is there a chance that this could be implemented in L32 LogSync? Maybe as an extension of the Webside upload function?
API documentation:
An example of how it could look like is Log4om:
Thank you very much for your time and for the great add-on for Logger32, I use it every day... every QSO :-)
?
73, Libor OK1ALX
|
Tnx so much Bob, I've solved!
Il 15/03/2025 14:35, Bob via groups.io
ha scritto:
toggle quoted message
Show quoted text
Do not do
a QRZ lookup for VU4AX.?Or, Click
VIEW menu, then UNcheck ENABLE ERROR TRAPPING. Or, read the
messages on this reflector. SeventyThree(s).
?
?
?
?
Hi to all, how can correct this error?
TNX in adavance, Lenio IZ5ILJ.
?
|
Do not do a QRZ lookup for VU4AX.?Or, Click VIEW menu, then UNcheck ENABLE ERROR TRAPPING. Or, read the messages on this reflector. SeventyThree(s).
?
?
On 03/15/2025 9:15 AM EDT IZ5ILJ Lenio <iz5ilj@...> wrote:
?
?
Hi to all, how can correct this error?
TNX in adavance, Lenio IZ5ILJ.
?
|
logger32 4.0.335 crashing
Hi to all, how can correct this error?
TNX in adavance, Lenio IZ5ILJ.
|
Hi to all, how can correct this error?
TNX in adavance, Lenio IZ5ILJ.
|
Hi to all, how can correct this error?
TNX in adavance, Lenio IZ5ILJ.
|
Look at the comment from OK1ALX on page 80
Look at page 81 of the help file and set the Logger32.exe compatibility mode to Windows 7.
Look at the comment from W3YQ on page 787
SeventyThree(s).
On 03/14/2025 8:12 AM EDT Sasha, YO2MKL via groups.io <yo2mkl@...> wrote:
?
?
hi all,
i have a problem with logger 32 it stops by itself, after 5 - 10 minutes. version 4.0.335, win 10 64bit. in event viewer it gives error MSVBVM60.DLL, i replaced .dll and it still does the same.
i reinstalled logger32 from scratch.
has anyone encountered this problem?
|
hi all,
i have a problem with logger 32 it stops by itself, after 5 - 10 minutes. version 4.0.335, win 10 64bit. in event viewer it gives error MSVBVM60.DLL, i replaced .dll and it still does the same.
i reinstalled logger32 from scratch.
has anyone encountered this problem?
|
Re: VU4AX not like by Logger32
Thank's for correction...
?
It's strange that it's not happen more often on others callsigns.....? ?Anyway :
one problem solved ! :-)
?
tnx for reactivity...73s
?
Franck F8ADY
|
Re: VU4AX not like by Logger32
The latitude/longitude for VU4AX received from QRZ is a non-numeric value. This is causing the error. It is fixed for the next auto-update. SeventyThree(s) .
On 03/14/2025 3:15 AM EDT F8ADY via groups.io <franckk@...> wrote:
?
?
Hello,
?
It's some times that I have a regular problem with logger32 :?
"Error 13 (Type incompatible) in procedure doDisplayQRZ of module mQRZ.? Error line 490? Logger32:4.0.335"
?
?
and after several times, the message say "Too many errors. Error checking temporarily disabled"
?
?
I NOW found the raison, and I can product it each time I want :
It's only when I click on VU4AX callsign (on bands maps or DX spots window) !
?
Can you help me to solve this strange problem ?? The text inside QRZ Lookup windows maybe contain invalid caracters ??
?
Tnx,
Franck F8ADY
|
VU4AX not like by Logger32
Hello,
?
It's some times that I have a regular problem with logger32 :?
"Error 13 (Type incompatible) in procedure doDisplayQRZ of module mQRZ.? Error line 490? Logger32:4.0.335"
?
?
and after several times, the message say "Too many errors. Error checking temporarily disabled"
?
?
I NOW found the raison, and I can product it each time I want :
It's only when I click on VU4AX callsign (on bands maps or DX spots window) !
?
Can you help me to solve this strange problem ?? The text inside QRZ Lookup windows maybe contain invalid caracters ??
?
Tnx,
Franck F8ADY
|
Re: L32LogSync QRZ Logbook
STATUS=AUTH&RESULT=AUTH&REASON=invalid api key
&EXTENDED=
Is a direct return from the QRZ server. For some reason it thinks
your API Key is different than what is being sent to the server..
73 Rick N2AMG
On 3/13/2025 2:00 AM, Mark via
groups.io wrote:
Hi All
?
Can anyone help with the L32LogSync tool?
?
I've recently added a paid subscription to my QRZ.com
account, but when I try and use L32LogSync with the site I get
"invlaid API key". The debug file contains:
?
13/03/2025 05:57:11 - QRZLogbookStatus - Begin =?
13/03/2025 05:57:11 - QRZLogbookStatus PostString =
KEY=&ACTION=STATUSContent-Type:application/x-www-form-urlencoded
13/03/2025 05:57:12 - QRZLogbook Status Message =
STATUS=AUTH&RESULT=AUTH&REASON=invalid api key?
&EXTENDED=
13/03/2025 05:57:12 - QRZLogbookStatus - End =?
?
Which doesnt really say very much else.
?
Any ideas anyone?
?
As far as I can see the logbook name, number and API key are
correct in the QRZLogbook Setup window of L32LogSync.
?
Many thanks.
?
Mark
G0MGX
|
JC mon vieux, I always keep a couple of extra bottles of French vin the the garage. It makes good anti-freeze for the radiator in the winter. SeventyThree(s).
toggle quoted message
Show quoted text
On 03/13/2025 2:59 PM EDT jean-Christophe via groups.io <fe5ind@...> wrote:
Quite frankly... some American wines have nothing to envy from the French... because I'm French.
F5ind
Le 13 mars 2025 ¨¤ 14:53, Bob via groups.io <k4cy@...> a ¨¦crit :
Same here Bob, and I hope any tariffs aren¡¯t going to affect your intake!
Cheers
|
Libor OK1ALX
IZ5ILJ Lenio
F8ADY