HI Gary, John et All.
Thank you for the advices, after 20 et more years of L32 use I have learned more options I never used HI.
Both options the Scratchpad and the DX-Spot_History relate to the SPOTs list,?
but these are not my almost 20Y_newby needs...
Let me be more specific: I am on QRG_A have to check the PA_tuning and dont want to TX on A_QRG
so I move to QRG_B anywhere up\down the band or just move from A to B or even C,D,E qrgs
(the ColibriNano SDR and his big brothers) have a memorized list of more that 10 positions)
and I want go back without being?related to any SPOT.
For the QRG BtoA move N1MM has F8 hotkey, only one position but it suffice in many occasions.
Bet you to recall the previous QRG....
Or take pen&paper to write on HI.
As I have written in my previous post the modern FLEXRADIO8k6 has not such feature...
but this is another story
73
Phil ex IC8POF-now IU0EBV
?
|
Thanks Rick !
73 de IK6CGO
|
There is no column for OQRS on the Logger32 Logbook Page or Previous QSOs? windows. SeventyThree(s).
On 02/26/2025 4:54 AM EST john Kalou via groups.io <z50john@...> wrote:
?
?
Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
On Logsync you will need to use the dropdown on the LOTW tab and
select the call you want to upload under. That dropdown is filled
by reading the station_data file that is created by Tqsl. If you
don't have a station_date file created then open Tqsl and it is
located on the top menu.
73 Rick N2AMG
On 2/26/2025 3:04 AM, IK6CGO via
groups.io wrote:
Hi to all,
I'm using L32LogSinch v2.0.19.8 and I have to say a big
thank to Rick N2AMG, the program works great.
Now, before I have possible problems, I ask your opinion.
On TQSL I have two certificates, my call IK6CGO
and the call IQ6MC club station.
On Logger32 I have the two calls (operators), on L32LogSinch,
both for Lotw and for ClubLog, now for the auto upload I have
set ONLY for the call IK6CGO and now I would
like to add and set also IQ6MC, it is enough that I add this
call both for ClubLog and for Lotw. My question is: will the
auto upload work separately when I use IK6CGO or IQ6MC?
Obviously on Logger32 I will have to change "operator" first
Thanks in advance and best 73' de IK6CGO
|
Sorry for the mistake, I've send this email to a
wrong group.
73's Lenio IZ5ILJ.
Il 26/02/2025 11:14, IZ5ILJ Lenio ha
scritto:
toggle quoted message
Show quoted text
Hello everyone, can anyone tell me
the name of the font used for the frequency?
Some font must be corrupted on
my PC because I can see like this!
Thanks in advance to anyone who
can help me, 73's Lenio IZ5ILJ.
|
HI John,? once I did the?OQRS request I flag also the QSL sent and this will write the date in the QSL_SENT field. I guess that if you request a QSL online, you are not going to send also paper QSL.
Andrea iz2lsc
Il giorno mer 26 feb 2025 alle ore 10:54 john Kalou via <z50john= [email protected]> ha scritto: Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
Hello everyone, can anyone tell me
the name of the font used for the frequency?
Some font must be corrupted on my
PC because I can see like this!
Thanks in advance to anyone who
can help me, 73's Lenio IZ5ILJ.
|
Good morning can my helping to where is the date on request oqrs? card i can't not to find maybe is not enable ?
?
Thanks?
|
Hi to all,
I'm using L32LogSinch v2.0.19.8 and I have to say a big thank to Rick N2AMG, the program works great.
Now, before I have possible problems, I ask your opinion.
On TQSL I have two certificates, my call IK6CGO and the call IQ6MC club station.
On Logger32 I have the two calls (operators), on L32LogSinch, both for Lotw and for ClubLog, now for the auto upload I have set ONLY for the call IK6CGO and now I would like to add and set also IQ6MC, it is enough that I add this call both for ClubLog and for Lotw. My question is: will the auto upload work separately when I use IK6CGO or IQ6MC? Obviously on Logger32 I will have to change "operator" first
Thanks in advance and best 73' de IK6CGO
|
New screenshot in my Logger32 screenshot gallery
Hi all New screeshot by Felix, EA4HOS has been added in the gallery.
|
Congratulations. Refreshingly open about it, many are not so and leave us wondering.
Regards,
Mike VP8NO
toggle quoted message
Show quoted text
On 25/02/2025 17:56, Jerry VE9CD via groups.io wrote: Sorry for my first message. I found what I was looking for. The very bottom
of the log has a square button that lets me drag horizontally to the right
or back to the left. At the end of screen, there is the equivalent square
button that can be dragged (or moved up and down with arrows).
Thanks for taking the time to answer.
73,
Jerry VE9CD
On Sun, Feb 23, 2025 at 3:46?PM Bob via groups.io <k4cy=
[email protected]> wrote:
Logger32 doesn't know, or care, if it is running on a desktop or laptop. The
main Logger32 Window (the MDI) has no scrollbars. Is this the window you
are referring to, or another Window? All columns/rows where?
SeventyThree(s).
On 02/23/2025 2:34 PM EST jerryars via groups.io <jerryars=
[email protected]> wrote:
Are there settings on Logger32 which enable the bottom horizontal scroll
and the vertical scroll to view all columns and rows?
|
Sorry for my first message. I found what I was looking for. The very bottom of the log has a square button that lets me drag horizontally?to the right or back to the left. At the end of screen, there is the equivalent square button that can be dragged (or moved up and down with arrows).?
Thanks for taking the time to answer.
73, Jerry VE9CD
Logger32 doesn't know, or care, if it is running on a desktop or laptop. The main Logger32 Window (the MDI) has no scrollbars. Is this the window you are referring to, or another Window? All columns/rows where? SeventyThree(s).
?
?
Are there settings on Logger32 which enable the bottom horizontal scroll and the vertical scroll to view all columns and rows??
|
Re: New POTA/SOTA cluster for L32
Hi Gary,
I will try this and let you by direct email.
73 Andrea iz2lsc
Il giorno mar 25 feb 2025 alle ore 19:56 ZL2iFB via <zl2ifb= [email protected]> ha scritto: Hi Andrea.
I am connected now.? It's good to see the merged POTA and SOTA and general DX spots ... but?the band filter does not appear to work on your cluster.? I'm currently laser-focused on 10m and have set the band filter via VE7CC's Cluster User program like this:
The latest spot POTA received (shown just above the band table here) was from your cluster on 14323 kHz, despite?being set to reject all 20m spots. ? 73 Gary? ?beater/tester &?
Honor Roll &? checker
Hi all,? I just want to inform you that a new cluster node is available providing a real good service for POTA or SOTA hunting. This node is connected to the global cluster network (so it provides SPOTS like any other cluster) and in addition it provides specific POTA and SOTA spots grabbing the data from their respective web cluster interface. By connecting to this cluster you can have in Logger32 both normal and POTA/SOTA spots at the same time in the same window. Marketing folks love to say "in a single?pane of glass" ;-)
As usual you can use filters to eliminate spots you are not interested in. (I can provide further details if needed). It is based on DXspider and it is compatible with all logging programs that support telnet clusters (including of course our great Logger32). Around 100 users are already using it without?any issue.
If you want to give it a try, you are welcome, it's free ;-) Connection details are as follows:
Cluster name: IZ2LSC-99 Address:? Port: 7373
You can add it in logger32 by right clicking on the telnet window then setup/setup remote host.? insert data like image below
and click on "Set as default shortcut".
Let me know if all is ok!
73s
Andrea, iz2lsc
|
Section 14.5 DX spot history on page 346 might also prove useful too.
--
73, John - G7SSE
|
... or look at the last paragraph on page 309 of the help file. SeventyThree(s).
?
?
On 02/25/2025 1:50 PM EST ZL2iFB via groups.io <zl2ifb@...> wrote:
?
?
Hi Phil.
?
Check out the scratchpad (chapter 4 of the ) - a far more elaborate function than just A/B swaps!?
?
73
Gary?
?beater/tester &?
Honor Roll &? checker
HI All, I am just wondering if the following option is enbedded in Logger32 , of course the L32 is to be active :
I am on Freq A ... move to Freq B ... then want go back to Freq A
I have searched in the big help file of L32 but with no result.
Incidentally N1MM has such option, which is usefull in many occasions
and because the new FlexRadio 8600 has not such option....
73
Phil ex IC8POF now IU0EBV
?
?
?
?
|
Re: New POTA/SOTA cluster for L32
Hi Andrea.
I am connected now.? It's good to see the merged POTA and SOTA and general DX spots ... but?the band filter does not appear to work on your cluster.? I'm currently laser-focused on 10m and have set the band filter via VE7CC's Cluster User program like this:
The latest spot POTA received (shown just above the band table here) was from your cluster on 14323 kHz, despite?being set to reject all 20m spots. ? 73 Gary? ?beater/tester &?
Honor Roll &? checker
Hi all,? I just want to inform you that a new cluster node is available providing a real good service for POTA or SOTA hunting. This node is connected to the global cluster network (so it provides SPOTS like any other cluster) and in addition it provides specific POTA and SOTA spots grabbing the data from their respective web cluster interface. By connecting to this cluster you can have in Logger32 both normal and POTA/SOTA spots at the same time in the same window. Marketing folks love to say "in a single?pane of glass" ;-)
As usual you can use filters to eliminate spots you are not interested in. (I can provide further details if needed). It is based on DXspider and it is compatible with all logging programs that support telnet clusters (including of course our great Logger32). Around 100 users are already using it without?any issue.
If you want to give it a try, you are welcome, it's free ;-) Connection details are as follows:
Cluster name: IZ2LSC-99 Address:? Port: 7373
You can add it in logger32 by right clicking on the telnet window then setup/setup remote host.? insert data like image below
and click on "Set as default shortcut".
Let me know if all is ok!
73s
Andrea, iz2lsc
|
Hi Phil.
Check out the scratchpad (chapter 4 of the ) - a far more elaborate function than just A/B swaps!?
73 Gary? ?beater/tester &?
Honor Roll &? checker
HI All, I am just wondering if the following option is enbedded in Logger32 , of course the L32 is to be active :
I am on Freq A ... move to Freq B ... then want go back to Freq A
I have searched in the big help file of L32 but with no result.
Incidentally N1MM has such option, which is usefull in many occasions
and because the new FlexRadio 8600 has not such option....
73
Phil ex IC8POF now IU0EBV
?
?
|
HI All, I am just wondering if the following option is enbedded in Logger32 , of course the L32 is to be active :
I am on Freq A ... move to Freq B ... then want go back to Freq A
I have searched in the big help file of L32 but with no result.
Incidentally N1MM has such option, which is usefull in many occasions
and because the new FlexRadio 8600 has not such option....
73
Phil ex IC8POF now IU0EBV
?
?
|
New POTA/SOTA cluster for L32
Hi all,? I just want to inform you that a new cluster node is available providing a real good service for POTA or SOTA hunting. This node is connected to the global cluster network (so it provides SPOTS like any other cluster) and in addition it provides specific POTA and SOTA spots grabbing the data from their respective web cluster interface. By connecting to this cluster you can have in Logger32 both normal and POTA/SOTA spots at the same time in the same window. Marketing folks love to say "in a single?pane of glass" ;-)
As usual you can use filters to eliminate spots you are not interested in. (I can provide further details if needed). It is based on DXspider and it is compatible with all logging programs that support telnet clusters (including of course our great Logger32). Around 100 users are already using it without?any issue.
If you want to give it a try, you are welcome, it's free ;-) Connection details are as follows:
Cluster name: IZ2LSC-99 Address:? Port: 7373
You can add it in logger32 by right clicking on the telnet window then setup/setup remote host.? insert data like image below
and click on "Set as default shortcut".
Let me know if all is ok!
73s
Andrea, iz2lsc
|
Reinstalling Logger32 might help if if has become corrupted but "shutting down immediately" smells to me like the DEP issue.
Check for advice on how to resolve that.? Section 2.12.
73 Gary? ?beater/tester &?
Honor Roll &? checker
[Edited Message Follows]
thanks guys,
I do have a station_data file now, and am not seeing an error, (but it may be there) but? logger32 still shutting down immediately..
path to? TrustedQSL is? good and no need to change it.
Should? I reinstall?
?
|
IK6CGO
IZ5ILJ Lenio
John Munton - G7SSE
ZL2iFB