Hi all
I am reverting on an issue which I cannot solve.
My kog has a QSO with France on 13cm (QO-100 contact) which is correctly entered in the log as indicated by Bob a couple of weeks ago.
The band is configured, and has a Y for stats.
France does not show as neither worked nor confirmed on the DXCC mixed award table.
There are many more such examples of QSOs not acoounted for.
What am I missing ?
See file attached.
73
Paul F6EXV
|
Utlity program for Logger32 moved
Hi all
This page has been moved.? ?https://ja1nlx.web.fc2.com/UtilityProgram/index.html There are several updated and new utilities. Check new page.
|
Re: LogSync No longer changing LOTW_SENT flag?
I just checked mine as well, & that was turned off here
also!!
73
Ken ZL4NR
On 10/11/2024 6:33 am, Rick Williams -
VE7TK via groups.io wrote:
toggle quoted message
Show quoted text
Thanks for getting back Aki & Rick. I deleted my earlier
post after I found another discussion on this issue.
?
It looks like the update process at my end unchecked the Update
Logger32 LOTW Flags After Upload.
?
So as expected the issue was one of pilot error on my part!
?
--
---------------
73, Rick
VE7TK
Website:?
|
Re: LogSync No longer changing LOTW_SENT flag?
Thanks for getting back Aki & Rick. I deleted my earlier post after I found another discussion on this issue.
?
It looks like the update process at my end unchecked the Update Logger32 LOTW Flags After Upload.
?
So as expected the issue was one of pilot error on my part!
?
--
---------------
73, Rick
VE7TK
Website:?
|
Re: LogSync No longer changing LOTW_SENT flag?
At first I was looking thru my code to see where the message was
located but those messages are from Logger32 not from Logsync.
Those messages are generated just before Logger32 sends Logsync a
message to upload the file it created..
73 Rick
On 11/8/2024 2:06 AM, ja1nlx wrote:
Rick
Someone reported this before. He solved the problem by
updating TQSL.
Is TQSL the latest one ?
On 2024-11-08
½ðê×ÈÕ 15:54:13, Rick Williams - VE7TK via groups.io
<ve7tk@...> wrote:
Something has changed ... I'm not sure if it's pilot
error on my part? (Often that is the problem!)
?
In the past LogSync gave me similar to that in the
message box shown in the manual after an up load to
LoTW.
?
?
Recently however the function, at my QTH, is behaving
differently. The LOTW_SEND flags are changed HOWEVER the
QSOs are not flagged as having been sent to LoTW?
?
Here's the info box I get after an LoTW upload. If I
answer YES the LOTW_SEND flag is changed BUT the
LOTW_SENT flag is not set?
?
?
I am using LogSync 2.0.19.8, which seems to be the
latest. Is there a setting I have missed?
?
Thanks!
?
---------------
73, Rick
VE7TK
Website:?
|
Re: LogSync No longer changing LOTW_SENT flag?
Rick Someone reported this before. He solved the problem by updating TQSL.
On 2024-11-08 ½ðê×ÈÕ 15:54:13, Rick Williams - VE7TK via groups.io <ve7tk@...> wrote: Something has changed ... I'm not sure if it's pilot error on my part? (Often that is the problem!)
?
In the past LogSync gave me similar to that in the message box shown in the manual after an up load to LoTW.
?
?
Recently however the function, at my QTH, is behaving differently. The LOTW_SEND flags are changed HOWEVER the QSOs are not flagged as having been sent to LoTW?
?
Here's the info box I get after an LoTW upload. If I answer YES the LOTW_SEND flag is changed BUT the LOTW_SENT flag is not set?
?
?
I am using LogSync 2.0.19.8, which seems to be the latest. Is there a setting I have missed?
?
Thanks!
?
---------------
73, Rick
VE7TK
Website:?
|
Correction:
?
The speed up plus is translated to chr$(187) ?
andthe speed down minus is translated to chr$(171) ?
?
SeventyThree(s).
On 11/07/2024 2:57 PM EST Bob via groups.io <k4cy@...> wrote:
?
?
I made a macro BLAH BLAH $SPEED +++++$? BLAH BLAH
?
When I click on the macro button the transmit pane of the CW Machine is populated? BLAH BLAH ????? IBLAH BLAH. The + is translated to ? chr$(187). And it I had $SPEED - - - - -$? the - is translated to ? Chr$(171)
?
When the CW Machine sees a ? or a ??it does not transmit the character, it bumps the speed up or down.
?
I assume your PC does not use the same character set and the chr$(187) is a / or something. SeventyThree(s).
?
On 11/07/2024 12:10 PM EST Regin, OY1R <dreamglider@...> wrote:
?
?
On Thu, Sep 12, 2024 at 11:46 AM, Regin, OY1R wrote:
i use the Winkeyer and the hardware microHAM Digi Keyer II. I just updated logger32, still not working, now the $speed+$ macro command sends "/"
it sends the + in the $speed+$ an a "/" ( -..-. )
If the macro is $call$ $speed++++++$ $sentrstn$ it sends "OY1R ////// 5NN"
?
?
?
Regin, OY1R
|
I made a macro BLAH BLAH $SPEED +++++$? BLAH BLAH
?
When I click on the macro button the transmit pane of the CW Machine is populated? BLAH BLAH ????? IBLAH BLAH. The + is translated to ? chr$(187). And it I had $SPEED - - - - -$? the - is translated to ? Chr$(171)
?
When the CW Machine sees a ? or a ??it does not transmit the character, it bumps the speed up or down.
?
I assume your PC does not use the same character set and the chr$(187) is a / or something. SeventyThree(s).
?
On 11/07/2024 12:10 PM EST Regin, OY1R <dreamglider@...> wrote:
?
?
On Thu, Sep 12, 2024 at 11:46 AM, Regin, OY1R wrote:
i use the Winkeyer and the hardware microHAM Digi Keyer II. I just updated logger32, still not working, now the $speed+$ macro command sends "/"
it sends the + in the $speed+$ an a "/" ( -..-. )
If the macro is $call$ $speed++++++$ $sentrstn$ it sends "OY1R ////// 5NN"
?
?
?
Regin, OY1R
|
On Thu, Sep 12, 2024 at 11:46 AM, Regin, OY1R wrote:
i use the Winkeyer and the hardware microHAM Digi Keyer II. I just updated logger32, still not working, now the $speed+$ macro command sends "/"
it sends the + in the $speed+$ an a "/" ( -..-. )
If the macro is $call$ $speed++++++$ $sentrstn$ it sends "OY1R ////// 5NN"
?
?
?
Regin, OY1R
|
Re: Logger32 and ... XIEGU G90
Daniel,
?
Have you read and followed the instructions in the G90 manual? url:
?
?
?
?
--
Gerald, VE1DT
|
Re: Logger32 and ... XIEGU G90
Have you tried selecting any of the ICOM radio types, Daniel, or the plain ICOM setting?? ?
I'm not sure what CIV hex address and baudrate your radio uses though.
73 Gary? ?beater/tester &?
Honor Roll &? checker
It's interesting how flat answers can be published.
Logger32 has NO IC-7000, Aron, ?selection for a TRX.
Of course I've already tried it all, otherwise I wouldn't be asking here ?
?
Daniel
HB9DDS
|
Re: Logger32 and ... XIEGU G90
It's interesting how flat answers can be published.
Logger32 has NO IC-7000, Aron, ?selection for a TRX.
Of course I've already tried it all, otherwise I wouldn't be asking here ?
?
Daniel
HB9DDS
|
Re: FT8 QSOs not logged automatically
Try using JTDX. SeventyThree(s).
On 11/05/2024 7:27 PM EST Arturo LU6ETB <lu6etb@...> wrote:
?
?
Hi Aki,
?
Thanks for the tips.
I think, I have tried all the combinations without luck.
On each combination, I start calling CQ and all the QSOs are logged automatically.
?
After some time, the WSJT-X window requesting to to press ok? to log the qso appears.
If I don't press ok, the qso is not transferred to Logger.
?
Same behavour when using Cherry Picking.
?
73 de Arturo, LU6ETB
|
Re: FT8 QSOs not logged automatically
I do not remember your original message.
When QSO is logged in wsjtx, this QSO is not logged automatically in Logger32. Is this your problem ?
Run wsjtx always from UDP BandMap.? Check "Enable contemporaneous user input sequence" option. Uncheck "TCP/ADIF logging" option Otherwise it does not work correctly.
On 2024-11-06 Ë®ê×ÈÕ 9:27:19, Arturo LU6ETB via groups.io <lu6etb@...> wrote: Hi Aki,
?
Thanks for the tips.
I think, I have tried all the combinations without luck.
On each combination, I start calling CQ and all the QSOs are logged automatically.
?
After some time, the WSJT-X window requesting to to press ok? to log the qso appears.
If I don't press ok, the qso is not transferred to Logger.
?
Same behavour when using Cherry Picking.
?
73 de Arturo, LU6ETB
|
Re: FT8 QSOs not logged automatically
Hi Aki,
?
Thanks for the tips.
I think, I have tried all the combinations without luck.
On each combination, I start calling CQ and all the QSOs are logged automatically.
?
After some time, the WSJT-X window requesting to to press ok? to log the qso appears.
If I don't press ok, the qso is not transferred to Logger.
?
Same behavour when using Cherry Picking.
?
73 de Arturo, LU6ETB
|
Re: Logger32 and ... XIEGU G90
I have no idea.?
?
But it's amazing what you can find on the Internet in five minutes with Google. The G90 manual says to use the Icom IC-7000 protocol and requires an Icom CI-V interface. Serial port settings (baud/parity/stop bits etc.) are all listed.
?
SeventyThree(s).
On 11/05/2024 3:17 AM EST HB9DDS <hb9dds@...> wrote:
?
?
[Edited Message Follows]
Hello to ALL
?
Does anyone use Logger32 with a Xiegu G90`If so, what are the settings for data transfer (CAT Control)? Nothing works here.
?
Daniel
HB9DDS
|
Logger32 and ... XIEGU G90
Hello to ALL
?
Does anyone use Logger32 with a Xiegu G90`If so, what are the settings for data transfer (CAT Control)? Nothing works here.
?
Daniel
HB9DDS
|
It is not done by the new Logsync. This happened to me with the older version as well. I haven't experienced it recently though.
73
HA1AR Ern?
|
Re: Stupid question - how to open search pane?
Bob,
I was working with an incomplete log, not containing all my sat QSOs.
So instead of finding a logging program that works, I should look for a user that knows how to use it¡.
My apologies for bandwidth.
?
73
Paul
?
?
Send me an ADIF export file of some of your satellite QSOs, I will test it here. SeventyThree(s).
toggle quoted message
Show quoted text
On 11/04/2024 2:35 AM EST Paul F6EXV <f6exv@...> wrote:
Come on, Bob !
?
?
A logging program that works?
On 11/03/2024 4:27 PM EST Paul F6EXV <f6exv@...> wrote:
So what is next step please ?
?
?
Congratulations on new one !
But here, that does not work¡
?
?
I logged a contact with F6EXV on 2m. I set PROP_MODE to SAT. I set SAT_NAME to QO-100. I looked at the DXCC_SATELLITE
award, there you are. Thanks for the ATNO (I dob't know what it means, but I hear people get very excited about their ATNOs). SeventyThree(s).
On 11/03/2024 7:13 AM EST Paul F6EXV <f6exv@...> wrote:
They are all logged that way¡
?
?
Look at page 389 of the help file. For a contact to be counted as a 'satellite' contact it must be logged with the
PROP_MODE field as "SAT", and the SAT_NAME field as "QO-100" (or whatever). SeventyThree(s).
On 11/03/2024 4:01 AM EST Paul F6EXV <f6exv@...> wrote:
Hi Gary
I re-installed L32 and now I do see this menu.
Now, another issue¡ I have worked roughly 65 countries on? QO-100, band 13cm.
L32, in the DXCC stat excel-like file, only shows ¡ one !
How come ?
?
73
Paul F6EXV
?
?
You? need to right-click in the body of the logbook, on any QSO line - not the window title or the column headers.
Do you get that menu, something similar, or nothing at all?
Honor Roll &? checker
?
?
if you
Right click on the Logbook Page Window
- what do you see - as options ?.
|
Re: Stupid question - how to open search pane?
Send me an ADIF export file of some of your satellite QSOs, I will test it here. SeventyThree(s).
On 11/04/2024 2:35 AM EST Paul F6EXV <f6exv@...> wrote:
?
?
Come on, Bob !
?
?
A logging program that works?
On 11/03/2024 4:27 PM EST Paul F6EXV <f6exv@...> wrote:
So what is next step please ?
?
?
Congratulations on new one !
But here, that does not work¡
?
?
I logged a contact with F6EXV on 2m. I set PROP_MODE to SAT. I set SAT_NAME to QO-100. I looked at the DXCC_SATELLITE award, there you are. Thanks for the ATNO (I dob't know what it means, but I hear people get very excited about their ATNOs). SeventyThree(s).
On 11/03/2024 7:13 AM EST Paul F6EXV <f6exv@...> wrote:
They are all logged that way¡
?
?
Look at page 389 of the help file. For a contact to be counted as a 'satellite' contact it must be logged with the PROP_MODE field as "SAT", and the SAT_NAME field as "QO-100" (or whatever). SeventyThree(s).
On 11/03/2024 4:01 AM EST Paul F6EXV <f6exv@...> wrote:
Hi Gary
I re-installed L32 and now I do see this menu.
Now, another issue¡ I have worked roughly 65 countries on? QO-100, band 13cm.
L32, in the DXCC stat excel-like file, only shows ¡ one !
How come ?
?
73
Paul F6EXV
?
?
You? need to right-click in the body of the logbook, on any QSO line - not the window title or the column headers.
Do you get that menu, something similar, or nothing at all?
Honor Roll &? checker
?
?
if you Right click on the Logbook Page Window
- what do you see - as options ?.
|
Rick Williams - VE7TK
Gerald Boutin
ZL2iFB
HB9DDS