KISS. I took the easy way out. ADIFModes.txt has been removed from auto-update files. SeventyThree(s).
On 07/24/2021 12:56 PM Bob <k4cy@...> wrote:
?
?
Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).
On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).
On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
My sentiments too Bill.
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 16:54:18
Subject: Re: [hamlogger] Generic QSO Window
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.? What I did back in March was to add Q65 to ADIFModes.txt.? I then inserted Q65 into the Edit Bands & Modes form.? A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.? That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 16:13:35
Subject: Re: [hamlogger] Generic QSO Window
Yes, be my guest. 73.
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
Bob
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
73
Ian G4GIR?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
as everybody and heir granny moves 1khz up, why the need for a macro? Your split shpuld be determined by the width and direction of the pile up? No??
Tom
GM4FDM
toggle quoted message
Show quoted text
On 24/07/2021 01:02, Vince Shirley wrote: Now another question.....
When using the macro? ?$QSY #Split+01q#$
I get a response from Logger32 "The BandPlan has no entries that match a frequency of? 18099.0 MHz" -? which is true if it really did mean 18099.0 MHz but it should be 18099.0 kHz
Its clearly saying MHz instead of kHz
Odd?
Vince
--
I thought growing old would take longer.
Just once, I want a username and password prompt to say: "Close enough."
At my funeral, take the bouquet from my coffin and throw it into the crowd to see who is next.
One minute you're young and fun. The next, you're turning down the car stereo to see better.
My people skills are just fine. Its my tolerance of idiots that needs work!
|
Thanks Bob it wasn't in the text file must try harder
?
73
????Ian G4GIR
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
... and the BandPlan is a text file called MyBandPlan.db 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
All your colors/fonts/etc. is inthe INI files. As far as logbooks are concerned, KISS and make an ADIF backup. 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
Blush blush blush
Op 24-7-2021 om 15:40 schreef Bob:
What do you
see on the rotor debug window? Is there a Rotator seected (are
you on a band with a rotator)? What is the text in the rotator
pane in the lower status bar? What is the tooltip of the
rotator pane?
?
Try setting
something else in Logger32 - the DVK, the CW Machine,
something to temporarily use COM 3. What results do you get?
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open
when Logger32 starts is not there. Click TOOLS | UTILITY
PROGRAM SETUP. You need to install all the utilities you
open when Logger32 starts.
?
Is there
a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows
and all other programs again.
Sofar I only installed my most important program :
Logger4
Now when I start Logger I see this message:
And another thing is that I cannot open the
rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
The rotator debug window is empty
Op 24-7-2021 om 15:40 schreef Bob:
What do you
see on the rotor debug window? Is there a Rotator seected (are
you on a band with a rotator)? What is the text in the rotator
pane in the lower status bar? What is the tooltip of the
rotator pane?
?
Try setting
something else in Logger32 - the DVK, the CW Machine,
something to temporarily use COM 3. What results do you get?
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open
when Logger32 starts is not there. Click TOOLS | UTILITY
PROGRAM SETUP. You need to install all the utilities you
open when Logger32 starts.
?
Is there
a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows
and all other programs again.
Sofar I only installed my most important program :
Logger4
Now when I start Logger I see this message:
And another thing is that I cannot open the
rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
What do you see on the rotor debug window? Is there a Rotator seected (are you on a band with a rotator)? What is the text in the rotator pane in the lower status bar? What is the tooltip of the rotator pane?
?
Try setting something else in Logger32 - the DVK, the CW Machine, something to temporarily use COM 3. What results do you get?
On 07/24/2021 9:30 AM Jan <hamlogger@...> wrote:
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the error 53 says the utility program you are trying to open when Logger32 starts is not there. Click TOOLS | UTILITY PROGRAM SETUP. You need to install all the utilities you open when Logger32 starts.
?
Is there a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows and all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger
I see this message:
And another thing is that I cannot open the rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open when
Logger32 starts is not there. Click TOOLS | UTILITY PROGRAM
SETUP. You need to install all the utilities you open when
Logger32 starts.
?
Is there a
COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows and
all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger I
see this message:
And another thing is that I cannot open the rotator
port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Bill Engel K5DHY