开云体育

ok [email protected]> ha scritto:

Thanks for the information about DXMap. I have no plans to provide a Logger32 interface to this software. SeventyThree(s).

Hi Bob, I hope you are doing great! I came across this interesting website https://dxmap.f5uii.net/ Just wondering if you consider interesting the possibility of connecting it with Logger32. The API

How is SmartSDR working now? I see no software updates, but Flex is now offering a new radio ... looks to me like a 500w version (with built in ATU) of the 8xxx, 73.

Hi Bob, Even ham band markers would be nice. 73, Gerry

Hi Bob, thanks to your advice I solved I set bands & mode between 5.354 and 5.360 and now everything works. THANKS AGAIN ! 73' IK6CGO

I don't know how you have Logger32 configured, but when Logging FT8 QSOs from JTDX, the FREQ_TX field is logged as VFO + Tx audio. So, your VFO frequency was less than 5357. Try setting the USB

5,357

What is the frequency of the QSO with no band? SeventyThree(s)

The error message is from Logger32. It is trying to modify a QSO in the logbook. If the modified record is missing a callsign, a band, or mode, you will see this message, and the logbook entry is not

A new screenshot of my Logbook page (only now I noticed this detail) As you can see in the BAND field the band is not written

Hi Bob, this is my setup Bands & modes I don't think the issue comes from Logger32 (qsos on 60 meters are recorded correctly) but from Rick's software N2AMG But I'm not an expert in software and any

Does your Logger32 know what 60m is? I just looked, and there is no 60m in my version. SeventyThree(s).

Hi, Logger32 version 4.0.336 L32LogSyncg version ?2.019.8 JTDX v2.2.160-rc7-d2 LogSync flagged with Auto Upload qsos to Lotw upon qso completion. Same flag with Auto Upload qsos to ClubLog upon qso

It looks like there is a timing problem. Looking at the radio debug window, I see manual start of JTDX by clicking the menu it shows a line Sent $command blah;blah;blah;$' then another line Direct

Hi Aki.? You misunderstood me. JTDX starts, but macros don't run. 73??? Vytas? LZ2VQ 2025-05-15 08:24, ja1nlx via groups.io:

Vytas This macro does nothing when you click DX spot. If you want, then "Quick switch" option should be enabled. 73 de aki JA1NLX

Hello, when I start JTDX from UDP, the written macros work. If I start JTDX from DX Spot, the macros do not work. Delay after starting JTDX does not affect this. Thanks! 73?? Vytas?? LZ2VQ

Not for GEN, or some VHF/UHF/uWave bands. Too many lines to draw on the graticule. SeventyThree(s).

Is there a way to get the MON BandMap to show a frequencies scale? Gerry VE6LB