Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you Bob, I will do it tomorrow morning my local time and report back, been a long day for me¡. Sorry for misunderstanding, just an average PC user guy¡. 73 Avi
toggle quoted message
Show quoted text
On 27 Apr 2025, at 18:20, Bob via groups.io <k4cy@...> wrote:
?
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
<image.png> ?
<image.png> ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
<image.png>
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Not quite?he test I had in mind. Start a Command Prompt (or PowerShell) with Admin privileges. At the prompt type CHKDSK c: /f??Use C: for the C drive, and /f to automatically fix any errors,
?
You might also check that you are not running out fo disk space. Maybe the disk optimization/compression needs more space. I don't know.
?
73.
On 04/27/2025 10:49 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Thank you Bob for your suggestion.
?
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
?
Problem still unresolved.
?
Bob I?appreciate your time and assistance very much.
If you or anyone else have any additional suggestions, I would appreciate it very much.
?
73 Avi 4X1WQ??
?
?
?
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Thank you Bob for your suggestion.
Did the scan?with?Windows CHKDSK utility of Hard Drives? (C) & (E) - no errors were found.
Problem still unresolved.
Bob I?appreciate your time and assistance very much. If you or anyone else have any additional suggestions, I would appreciate it very much.
73 Avi 4X1WQ??
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
I think you will find the error message pops up when the download of the Club Log exceptions completes, and not when you start VE7CC. This is easy to test.
?
Messages on the Club Log download window verify that the download completed successfully and no data was lost. Then the process of optimizing/compressing the new file starts. This fails (you see the error message).?
?
So why can't Logger32compress the file? Could it be corrupt data on the disk? Try running the Windows CHKDSK utility to look for errors. Other than that, I have no suggestions. SeventyThree(s).
On 04/27/2025 12:28 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello Bob and thank you for your prompt response.
?
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
?
In yesterday's trials I did the following:
?
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
?
STEP 2: Connecting to VE7CC following Error pops up:
?
 ?
 ?
I press OK TAB and exit L32
STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts.
STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.?
??
Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
?
Thank you very much for your help.
73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
?
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello Bob and thank you for your prompt response.
Yesterday after your 1st email, suggesting that "The error message is because your download of the Club Log exception database failed. Try it again.?" I tried 3 more times, but the problem remained.
In yesterday's trials I did the following:
STEP 1: The very first time in the day when I open L32, the Automatic AUTO UPDATE?process of Club Log exceptions update starts - no Errors are?displayed.
STEP 2: Connecting to VE7CC following Error pops up: ?  ?  ? I press OK TAB and exit L32 STEP 3:????Start L32 but this time, NO- Auto Update of Club Log Exceptions updates starts. STEP 4:? ? I Do manual update of Club Log Exceptions Update, looks OK, no Error shows 
STEP 5: I connect to VE7CC - Error pops up and Pfx?? column is populated with ??
Yesterday I repeated steps 3 to 5, three times with the same failure result, so decided to try again next day (today) so the Auto Update of Club Log Exceptions updates process will start first automatically.? ?? Today?I repeated steps 1 to 5, first time, and then additional three times steps 3 to 5, the problem?remained.
Thank you very much for your help. 73 Avi
... and?
On 04/26/2025 9:59 AM EDT Bob < k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
toggle quoted message
Show quoted text
On 04/26/2025 9:59 AM EDT Bob <k4cy@...> wrote:
?
?
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
On 04/26/2025 9:42 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Re: Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
The error message is because your download of the Club Log exception database failed. Try it again. SeventyThree(s).
On 04/26/2025 9:42 AM EDT Avi 4X1WQ via groups.io <avi.rochman@...> wrote:
?
?
Hello,
Asking for your assistance in resolving Pfx?? error, see attached.
Restarting L32 and or PC (W10) doesn't cure the problem.
Thank you
73 Avi 4X1WQ
?
|
Please assist with Pfx?? Error - Nothing is populated in Pfx Column just ??
Hello, Asking for your assistance in resolving Pfx?? error, see attached. Restarting L32 and or PC (W10) doesn't cure the problem. Thank you 73 Avi 4X1WQ
|
Re: Logger Radio Configuration for Yaesu FT-891
For the FTdx1200 for years I've used the FT2000 CAT settings with no problems.
|
Re: Logger 32 telnet problem
I connect to the VE7CC cluster, using the internal telnet and have no problems. Was working fine the other day anyway.
|
Re: Logger 32 telnet problem
Had the same problem changed to another cluster all ok and yet to change back? Ron G6GA?
toggle quoted message
Show quoted text
On 24 Apr 2025, at 8:14?pm, n5kd via groups.io <n5kd@...> wrote:
?
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Mark,
I'd suggest using the VE7CC user program as a front end, then get
L32 to connect to VE7CC.
73' Pete, N5KD.
On 4/24/2025 16:40, Mark M0UTD via
groups.io wrote:
toggle quoted message
Show quoted text
Hi
all
Has
anyone had any issues with losing telnet connection using
logger 32 ? I have tried various servers but still cannot get
a connection on the bottom task bar i have previously never
had any issues but now i am racking my brains and can¡¯t find
an answer, it maybe firewall related but i have changed
nothing on my laptop it also does not work on my back up
laptop neither which also used to work with no problem
Any
ideas welcome
Regards
Mark
M0UTD
|
Re: Logger 32 telnet problem
Check with your Internet service provider, maybe they have started blocking telnet due to it being insecure.
?
Good luck, N0NC
?
|
Hi all
Has anyone had any issues with losing telnet connection using logger 32 ? I have tried various servers but still cannot get a connection on the bottom task bar i have previously never had any issues but now i am racking my brains and can¡¯t find an answer, it maybe firewall related but i have changed nothing on my laptop it also does not work on my back up laptop neither which also used to work with no problem
Any ideas welcome
Regards
Mark
M0UTD
|
Re: How to get the State field to automatically capitalize
Isn't he STATE field in the Logbook Entry automagically all CAPS? You are in NJ, not Nj. SeventyThree(s).
On 04/24/2025 10:18 AM EDT David Mitchell via groups.io <wb2pjh@...> wrote:
?
?
I've forgotten the way to get the entry in the STATE field to automatically capitalize like the first letter in the name and QTH fields.??
?
Also, FWIW a recent Win 10 update required that I run Logger32 as ADMIN and also in Win 8 Compatibility mode.? Just sayin.
?
Thanks,
?
Dave WB2PJH
?
|
How to get the State field to automatically capitalize
I've forgotten the way to get the entry in the STATE field to automatically capitalize like the first letter in the name and QTH fields.??
?
Also, FWIW a recent Win 10 update required that I run Logger32 as ADMIN and also in Win 8 Compatibility mode.? Just sayin.
?
Thanks,
?
Dave WB2PJH
?
|
Re: Call Sign Not Appearing In Previous QSOs Window
Bob,
?
Yes, they are at the end of the ADIF file. Thanks again!!
?
73,
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
Yes, manually add the missing Qs. Are they listed at the end of the ADIF file you made?? SeventyThee(s).
On 04/24/2025 9:48 AM EDT N4JRZ via groups.io <n4jrz@...> wrote:
?
?
Bob,?
?
Thanks, that seemed to work with the exception that my log now is missing my last 5 QSOs. My guess is that I should manually add the QSOs now? Thanks for your help!!!
?
73,
?
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
Bob,?
?
Thanks, that seemed to work with the exception that my log now is missing my last 5 QSOs. My guess is that I should manually add the QSOs now? Thanks for your help!!!
?
73,
?
Todd
N4JRZ
|
Re: Call Sign Not Appearing In Previous QSOs Window
First things first -- Make an ADIF backup of all your logbooks, and hide them somewhere safe off the computer.
?
From your description you have?either inadvertently changer OPERATOR name in your logbook, and the previous QSOs window is configured to show only QSOs with the current operator.
?
Or your logbook dataset is broken. Click TOOLS | DATABASE MAINTENANCE | REBUILD xxxx LOGBOOK. Logger32 will now attempt to reconstruct your logbook. This could take a while.
?
SeventyThree(s).
On 04/24/2025 1:12 AM EDT N4JRZ via groups.io <n4jrz@...> wrote:
?
?
I have worked HD8G a total of 20 times. Previously all of my QSOs with HD8G were showing up in the previous QSOs window when I typed the call sign into the QSO window. Now as of about 1 hour ago, only 2 QSOs are showing up in the previous QSOs window and these QSOs took place after all of the other QSOs stopped showing up in the previous QSOs window. All QSOs with HD8G still appear in the logbook, worked/confirmed window, and show with an X as being previously worked in the DX Spot window. All other call signs appear to show up in the previous QSOs windows as they should.?
?
Could anyone give me any ideas as to why these QSOs aren't showing up in the previous QSOs windows like the rest??
?
Thanks for your help.
?
73,
Todd
N4JRZ
|
Avi 4X1WQ
DamianM0BKV
Mark M0UTD