Re: Display: Dark Mode for Logger32?
On 04/20/2025 7:20 AM EDT Bob <k4cy@...> wrote:
?
?
There is no 'work in progress' for improved support of the ever popular Darth Vader mode. SeventyThree(s).
On 04/20/2025 5:28 AM EDT Mike VK4DX via groups.io <sivcevic@...> wrote:
?
?
Maybe it's time to bring this topic back to life after almost five years.
?
Logger32 doesn't seem to follow windows colour rules and has its own UI colour scheme. While the grids can be nicely customised, as pictured below, the base interface cannot, which makes the the whole UX quite a bit inconsistent and not visually pleasing, particularly the QSO entry window.
?
Is there any plan to rewrite this part of the code, or is any work currently underway to address the issue? I understand Logger32 is a fairly old piece of software, and it may require a full rewrite to implement such changes, so please pardon my ignorance if that¡¯s indeed the case.
|
Logger Radio Configuration for Yaesu FT-891
Hello everyone,
Does anyone have a screenshot (for example) of the radio configuration of Logger32 for the Yaesu FT-891? I have reset the radio to factory settings. With another program (WinTest) everything works fine. I can't get it to work with Logger 32. Enhanced and standard port are set up.
Thank you very much!
Andy, DL5CW
|
I can not get the antenna switch to function. I have read earlier comments regarding this subject without any solution.
My computer use Windows 11 Pro. It is equipped with an extension card, ASIX PCIe to Multi Mode Parallel Port (LPT1).
And yes, I have read the manual. The "Band and Modes", page 41-45, and the "Antenna Switch" is configured as described in the manual, section 42.1.3.
The Antenna Switch is configured with the adress found in the device manager, EEF8. Configured with the adress &EFF8 "Pin 14 (Radio Switch)" LED is green.
All " Antenna Selected " LED?s are red.
In the Logger32 manual, page 886, is a testing procedure described. I have tried it, no LED turns green.
The Antenna Switch function was OK in my earlier Windows 10 computer.
Looking for help
73//SM6CGI Lars
?
?
|
Problem solved , sorry for bandwidth !
?
?
What is the error message? SeventyThree(s).
toggle quoted message
Show quoted text
On 04/22/2025 4:42 AM EDT Paul F6EXV via groups.io <f6exv@...> wrote:
When trying to edit the band plan, I get an error message and it will not open up.
What is the name of the band plan file, and where is it to be installed/found ?
|
What is the error message? SeventyThree(s).
On 04/22/2025 4:42 AM EDT Paul F6EXV via groups.io <f6exv@...> wrote:
?
?
Hi all
When trying to edit the band plan, I get an error message and it will not open up.
What is the name of the band plan file, and where is it to be installed/found ?
?
TU + 73
Paul F6EXV
|
Hi all
When trying to edit the band plan, I get an error message and it will not open up.
What is the name of the band plan file, and where is it to be installed/found ?
TU + 73
Paul F6EXV
|
Hello, is it possible to make the QSO complete and/or log it when
the correspondent replies to the second station?
Thanks!
73?? Vytas?? LZ2VQ
|
Re: Shift or CTL Click on DX Spot
Thanks Mark.
I have this working partially now and I'm using IC-7300 from the list in the setup window.
I have just emailed Bob to see if he can investigate another related matter.
BTW; I don't know if you use the Voice Keyer in your 7610 but if you do,? using the 7300 in the L32 radio setup will enable Logger32's DVK to trigger your voice messages stored on the SD card in the 7610.
73 John - G7SSE
------ Original Message ------
Date 21/04/2025 17:43:23
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
this is my working setup:
?
?
?
-- 73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
this is my working setup:
?
?
?
|
Re: Shift or CTL Click on DX Spot
Thanks aki
I've tried as IC-7800 but no luck!
I must be missing a setting somewhere, either in Logger32 or in the 7610.
Hope both you and your good lady are well.
73, John - G7SSE
------ Original Message ------
Date 21/04/2025 09:58:35
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
John I am using ic7610 and set ic7800 as radio. Shift+Clicking on DX spot moves VFO-B to his frequency.
On 2025-04-21 ÔÂ 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote: Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE
-- 73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
John I am using ic7610 and set ic7800 as radio. Shift+Clicking on DX spot moves VFO-B to his frequency.
On 2025-04-21 ÔÂ 17:47:45, John Munton - G7SSE via groups.io <johng7sse@...> wrote: Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
Well Bob, Mark
?
Not sure what I have got set wrong but I can't get this to work with my IC-7610.
?
I use IC-7300 in the radio setup but have tried with both? IC-7800 and 7600 with no joy.
?
I've also tried reducing the polling too.
?
Shift + DX spot click always goes to the Main VFO.
?
73, John - G7SSE
--
73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
I dont know what the difference in command sets is, but its likely to be in the detail.
?
As suggested, if I select the IC-7600 then all seems to work as expected - I hadn't realised I had the generic Icom selected.?
?
All working a treat - thanks as ever for the fast input :-)
?
Mark
G0MGX
|
Re: Shift or CTL Click on DX Spot
I meant IC-7300, is there an IC-7000?. Maybe IC-7xxx covers all the bases.
?
If there is something special about the IC-7610 CAT control that warrants it's own code, I'd be happy to add it. Other than that, use a compatible IC-7xxx setup (whatever that maybe). 73.
On 04/20/2025 6:08 PM EDT John Munton - G7SSE via groups.io <johng7sse@...> wrote:
?
?
Bob did you mean the IC-7000 rather than 73000?
?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
?
73
John - G7SSE
?
?
------ Original Message ------
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
?
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
?
?
--
73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
Bob did you mean the IC-7000 rather than 73000?
Any chance of updating the code to include the newer Icoms; IC-7300, IC-7610 etc..?
73 John - G7SSE
------ Original Message ------
Date 20/04/2025 21:06:43
Subject Re: [hamlogger] Shift or CTL Click on DX Spot
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
-- 73, John - G7SSE
|
Re: Shift or CTL Click on DX Spot
... and I checked the code. The Set subRX Freq command is sent to the radio only if you are configured as IC-73000, IC-7600, IC-7700, or IC-7800. SeventyThree(s).
On 04/20/2025 12:53 PM EDT Bob <k4cy@...> wrote:
?
?
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
Here's the picture again
?
?
SeventyThree(s)
On 04/20/2025 12:51 PM EDT Bob via groups.io <k4cy@...> wrote:
?
?
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
Clicking on a DX Spot with the Shify key held down sends the freq/mode to VFO-B? (or radio 2 if so configured.
?
And, just for fun I configured for an IC-7800. Shift + mouse click sent this to the radio.
?
?
?
SeventyThree(s).
?
?
On 04/20/2025 11:01 AM EDT Mark via groups.io <mark.g0mgx@...> wrote:
?
?
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
?
?
|
Re: Shift or CTL Click on DX Spot
That really was supposed to be shift click.
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
|
Shift or CTL Click on DX Spot
Greetings all
?
Previously (I am sure I didnt dream this), if you did a shity click on a DX spot in the DX Spot or BandMap window, it would set the 2nd VFO of the rig.?
?
Is that functionality no longer there or is there something up with my config for my IC-7610?
?
This is a normal spot click:
?
?
but with shift I dont see anything other than the normal poll messages.
?
Mark
G0MGX
?
?
|
John Munton - G7SSE
Mark