toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 16:13:35
Subject: Re: [hamlogger] Generic QSO Window
Yes, be my guest. 73.
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
Bob
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
73
Ian G4GIR?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
toggle quoted message
Show quoted text
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Bob
?
Is it safe to Re-name? a good working ***MyBandMode32 Database file to be used with a different configuration?
?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
?
73
?
Ian G4GIR?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
as everybody and heir granny moves 1khz up, why the need for a macro? Your split shpuld be determined by the width and direction of the pile up? No??
Tom
GM4FDM
toggle quoted message
Show quoted text
On 24/07/2021 01:02, Vince Shirley wrote: Now another question.....
When using the macro? ?$QSY #Split+01q#$
I get a response from Logger32 "The BandPlan has no entries that match a frequency of? 18099.0 MHz" -? which is true if it really did mean 18099.0 MHz but it should be 18099.0 kHz
Its clearly saying MHz instead of kHz
Odd?
Vince
--
I thought growing old would take longer.
Just once, I want a username and password prompt to say: "Close enough."
At my funeral, take the bouquet from my coffin and throw it into the crowd to see who is next.
One minute you're young and fun. The next, you're turning down the car stereo to see better.
My people skills are just fine. Its my tolerance of idiots that needs work!
|
Thanks Bob it wasn't in the text file must try harder
?
73
????Ian G4GIR
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
?
?
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
Found it.
?
Thanks to?all,?Panos and John G7SSE,?I remember adding?SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
?
Thanks all for your patience and help.
?
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
?
73
?
Ian G4GIR
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
... and the BandPlan is a text file called MyBandPlan.db 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
All your colors/fonts/etc. is inthe INI files. As far as logbooks are concerned, KISS and make an ADIF backup. 73.
On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
?
?
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
?
?
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
?
73 Ian
?
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
?
?
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
Hi Bob
?
I have just carried out a rebuild of the log, re-calculation and still no QSO'S?shown in the?Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
?
Run L32, still no sign of any QSO's.
?
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
?
Looks like I need to completely uninstall using windows uninstaller?
?
If I keep the Log Backup and the User files?backup then I assume I can get back to all the other configurations I have made. One question though,?ia all the colouring text and back ground shading etc backed up in the ini files?
?
73
?
Ian G4GIR
?
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window
... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window
You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.? Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.
Bill K5DHY
|
Blush blush blush
Op 24-7-2021 om 15:40 schreef Bob:
What do you
see on the rotor debug window? Is there a Rotator seected (are
you on a band with a rotator)? What is the text in the rotator
pane in the lower status bar? What is the tooltip of the
rotator pane?
?
Try setting
something else in Logger32 - the DVK, the CW Machine,
something to temporarily use COM 3. What results do you get?
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open
when Logger32 starts is not there. Click TOOLS | UTILITY
PROGRAM SETUP. You need to install all the utilities you
open when Logger32 starts.
?
Is there
a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows
and all other programs again.
Sofar I only installed my most important program :
Logger4
Now when I start Logger I see this message:
And another thing is that I cannot open the
rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
The rotator debug window is empty
Op 24-7-2021 om 15:40 schreef Bob:
What do you
see on the rotor debug window? Is there a Rotator seected (are
you on a band with a rotator)? What is the text in the rotator
pane in the lower status bar? What is the tooltip of the
rotator pane?
?
Try setting
something else in Logger32 - the DVK, the CW Machine,
something to temporarily use COM 3. What results do you get?
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open
when Logger32 starts is not there. Click TOOLS | UTILITY
PROGRAM SETUP. You need to install all the utilities you
open when Logger32 starts.
?
Is there
a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows
and all other programs again.
Sofar I only installed my most important program :
Logger4
Now when I start Logger I see this message:
And another thing is that I cannot open the
rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Ian - Yes, works for all awards including IOTA.
Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.? You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.
73,
Bill K5DHY
|
What do you see on the rotor debug window? Is there a Rotator seected (are you on a band with a rotator)? What is the text in the rotator pane in the lower status bar? What is the tooltip of the rotator pane?
?
Try setting something else in Logger32 - the DVK, the CW Machine, something to temporarily use COM 3. What results do you get?
On 07/24/2021 9:30 AM Jan <hamlogger@...> wrote:
?
?
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the error 53 says the utility program you are trying to open when Logger32 starts is not there. Click TOOLS | UTILITY PROGRAM SETUP. You need to install all the utilities you open when Logger32 starts.
?
Is there a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows and all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger
I see this message:
And another thing is that I cannot open the rotator port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Bob
OK about the first one. I have to install Logsync.
But about the rotator there is no error message,
Com 3 is figured.
Op 24-7-2021 om 15:21 schreef Bob:
Jan, the
error 53 says the utility program you are trying to open when
Logger32 starts is not there. Click TOOLS | UTILITY PROGRAM
SETUP. You need to install all the utilities you open when
Logger32 starts.
?
Is there a
COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
?
?
After a severe crash I had to install Windows and
all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger I
see this message:
And another thing is that I cannot open the rotator
port.
I have my rotator configured as follows:
Please help me...
--
____________________________________________________
my dxspider clusters running on a raspberry pi zero:
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388
|
Jan, the error 53 says the utility program you are trying to open when Logger32 starts is not there. Click TOOLS | UTILITY PROGRAM SETUP. You need to install all the utilities you open when Logger32 starts.
?
Is there a COM 3 in the newly configured PC? What is the error?
?
SeventyThree(s).
?
?
On 07/24/2021 9:02 AM Jan <hamlogger@...> wrote:
?
?
After a severe crash I had to install Windows and all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger
I see this message:
And another thing is that I cannot open the rotator port.
I have my rotator configured as follows:
Please help me...
|
After a severe crash I had to
install Windows and all other programs again.
Sofar I only installed my most important program : Logger4
Now when I start Logger I see this message:
And another thing is that I
cannot open the rotator port.
I have my rotator configured as follows:
Please help me...
|
Re: ClubLog Exception for SV2RSG/A
... or, you can send your logbook to Club Log (in chunks of 10K QSOs) and they will correct ant DXCC/CQZ problems automatically (just a few seconds for each chunk). Click SETUP | UPDATES | VALIDATE YOUR LOGBOOK DXCC/CQZ from Club Log. Then you can recalculate your stats. SeventyThree(s).
On 07/24/2021 6:04 AM Bob <k4cy@...> wrote:
?
?
The Club Log exceptions file also says this:
?
?
So, if you enter SV2RSG in the Logger32 logbook entry window now, it will show as 'Not accepted for DXCC'.
?
If you were lucky enough to contact SV2RSG/A in one of the windows that is approved, then it was logged as 'Not accepted for DXCC'. What you must do, is first, manually change the QSO to show DXCC, second recalculate the stats. Recalculating the stats does not modify the logbook entry.
?
SeventyThree(s).
On 07/23/2021 8:58 PM YV5EN - Edwin via groups.io <yv5en@...> wrote:
?
?
Hi to all,
I have L32 v4.0.269, the ClubLog Exception is updated but L32 shows QSO with SV2RSG/A as
Not accepted for DXCC.
As you can see at
this is? a valid Exception.
The Club Log Exceptions.txt file at Logger32 folder in C:/ shows
"SV2RSG/A is operating from DXCC 180 (Mt. Athos)"
The ClubLog shows
"File created on 23 julio 2021 at 20:32:45"
I recalculate Statistics but L32 still shows SV2RSG/A as
Not accepted for DXCC.
Any idea?
Thanks in advance,
--
Edwin - YV5EN (YV5HUJ 1979-2011)
? ? ? ??
web:????? ? ?
Twitter: ? ??
Instagram:?
|
Fw: [hamlogger] Generic QSO Window
I have carried out further investigations into this problem (still not fixed it though).
?
There are 3 common denominators in all of the 6?Configurations. Involving DXCC, DXCC CHALLENGE and IOTA, all other AWARD selections work ok.
?
Common Denominators 1 & 2 :-
That is that, in all of the Configs, DXCC_MIXED? & IOTA Mixed Mode Reports do not show any QSO's in the Generic QSO window when a slot is clicked on. All other mode/configs in the DXCC and IOTA? Reports window work ok and I can see the relevant QSO's in the Generic QSO window.
?
Common Denominator 3 :-
?
In DXCC CHALLENGE Award, None of the configurations show any QSO'S in the DXCC CHALLENGE? Generic window when a slot is clicked on, no matter what selections are selected in the DXCC CHALLENGE award window.
?
On a brighter note I have just upgraded a copy of L32 FROM VER 3.5 to VER 4, imported the log from the main PC and all is ok.
?
Thanks for all the help, will keep trying.
?
73
?
Ian G4GIR
toggle quoted message
Show quoted text
----- Original Message -----
Sent: 24/07/2021 09:40:59
Subject: Re: [hamlogger] Generic QSO Window
Bill,
?
Could you check all the award options to make sure you get QSO's showing in the Generic QSO window when clicking on a slot please. Assuming you have IOTA references stored etc?
Thanks
73
Ian G4GIR
?
----- Original Message -----
Sent: 24/07/2021 02:24:20
Subject: Re: [hamlogger] Generic QSO Window
Rebuilt the logbook and did a recalc - still no entries when I click on an award grid.? Also tried a fresh .INI, but no luck.
So I thought I would delete all the award files and recalc, but I went too far and deleted some essential files. Back to ground zero, I downloaded the full installation from the web, reloaded my log, did the autoupdate and all is well.
Bill K5DHY
|
Bill Engel K5DHY