开云体育

My Logger32 G4BUE log has 118,173 QSOs in it and the power levels vary from 5W or less QRP to 400W. I would like to extract all the QRP (5W or less) QSOs from the data base into a separate database

We have a new marketing tagline. "Logger32: making the impossible possible" 73 Gary ZL2iFB <http://www.g4ifb.com> Logger32 <https://www.loger32.net/> beater/tester & scribe

I had the exact same problem, but with the last 5 QSOs. In my case, the solution was embarrassingly simple (thanks Bob)? -- resize (shorten) the Logbook page so it fits properly in the allotted space

Logger32 is looking for an empty row in the BandMap or a Monitor BandMap to insert a callsign. Starting at row 0 (the top row) it looks at each row until the last one. The error says it is looking at

Hello, what is this error and how to deal with it? 73?? Vytas?? LZ2VQ

Hello Bob, It's hard for me to figure out these years, because I'm far from programming. I'll just say that periodically, with these settings, the inscription "operating split" appears, but

I have a similar problem. Just my last QSO fails to show, until I make another contact and then log that one and the previous one shows but not the last one. My issue is only for the last QSO not 2

Well,,,the only one that? I can think now is to close the program, shat down the computer and reboot again.??With my best 73's?DENick?SV1VS?Sent from my Phone.

I can't also bring it up either. Most of the time the problem occurs when i add a new call ?on DX Spots window country/Call allerts list. Wenn this call appears in the dx window, the s cratchpad

Well, that does work, so thank you for the hint. But I am still puzzled, as I dragged the arrow at the bottom right all the way down, and the 2 QSOs were still not showing 73 Paul F6EXV

Make the window of the logbook a bit higher.?73's?DENickSV1VS?Sent from my Phone.

Hi all The last 2 QSOs do not show on the logbook page screen. They are in the log , as they show in the same callsign window though. When I add a new QSO, then it is still the last 2 QSOs that will

If your radio and Logger32 are incompatible for operating/logging QP-100, c'est la vie. I'm sure there are many other logging programs that meet your operating requirements. SeventyThree(s).

Houston we have a problem! Sorry Bob can you look into the issue better? In fact in this case that is when using a radio that manages SAT communications when this mode is activated the two VFOs

Bob suggested reading HELP to this paragraph.. 36.2.10 Page 813 Logging frequency setup The ADIF field FREQ is intended to hold our transmit frequency, so we need to tell Logger32 which VFO on which

Thanks Steve for your answer. Yes, that's the whole problem, satellite mode is not a split mode. Each band has 2 VFOs (A/B). With an IC-9700 you can do Split on the Main or Sub in V/V or U/U, but not

You said No RED QSO-DATE and nothing in the log window. I told you twice - Left click on the column header. 73.

I have no idea what the CAT commands/replies or your radio are, but looking at the code, I see the following rules are applied ... First, some details of the reply to a split poll that I see in your

Bob, All logs open properly now. Whew! Thanks. 73 Tony K2NV

Bob, I think I fixed it but not sure why. The log window did not show any QSOs. I went under "Database Managment" and selected "Logbook Details”. It showed that the log book was opened and all the