Hi Didier,
Well, I must be wrong, but I understood the original question as how to
automatically populate the fields if the contact was in the log already.
Sorry for causing the confusion. I personnally do not use QRZ lookup, as it
doesn't give the name in 90% of the callsigns (just the first letter of the
name), I don't really care about street address and not all the callsigns
are in QRZ database.
73!
Andrei, de ZL1TM
toggle quoted message
Show quoted text
----- Original Message -----
From: "Didier Juges" <didier@...>
To: <hamlogger@...>
Sent: Monday, 16 June 2003 5:02 a.m.
Subject: [hamlogger] Re: Automatic filling ?
Andrei,
The question as I understand it was "how to retroactively (after the fact)
update QSO's that are already in the logbook but don't have the address
field filled up". For instance, I work a number of stations while portable
(no internet and no QRZ.COM). Once back in the shack, I would like to
connect the PC to the internet and batch update these QSOs automatically
from QRZ.COM. That would be a nice feature, similar to what you do to flag
for QSLs.
73,
Didier/KO4BB
----- Original Message -----
From: "Andrei" <zl1tm@...>
To: <didier@...>
Sent: Saturday, June 14, 2003 5:20 PM
Subject: [personal] Re: [hamlogger] Automatic filling ?
Hi Didier,
In logbook entry window right mouse click -->Setup --> Set up QSO mask.
Select what you want and click Apply.
Is that what you want?
73!
Andrei, de ZL1TM
----- Original Message -----
From: "Didier Juges" <didier@...>
To: <hamlogger@...>
Sent: Sunday, 15 June 2003 12:33 a.m.
Subject: Re: [hamlogger] Automatic filling ?
I asked that question before and the answer was no.
I am not sure if there are any plans to add that feature, but it sure
would
be nice.
Right now, when I want to do that, I create a new QSO with the same
station
then change the date/time/frequency to match the old QSO, then delete
the
old QSO. I found it faster and less error prone than copying the name
and
address fields into the old QSO.
Didier/KO4BB
At 12:18 PM 06/14/2003 +0200, you wrote:
Hi again.
Sorry for my multiple questions...
I'd like to know if it is possible, if a contact were already done,
to
automatically fill the already informed fields like Name or QTH
without
using autolookup feature.
--
F8DQL - UFT 1116
K2/100 #3249
To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@...
Visit these sites for Logger and other downloads:
and...
Asst. Moderator: dwmcclure@...
Your use of Yahoo! Groups is subject to
To unsubscribe from this group, send an email to:
hamlogger-unsubscribe@...
Visit these sites for Logger and other downloads:
and...
Asst. Moderator: dwmcclure@...
Your use of Yahoo! Groups is subject to
