Gents
This may well be old news to some... but Coaxial Dynamics makes
a 25 kw slug.[2-30 mhz].. for a standard 7/8" line
section....cheap.
They also make the usual 10 kw 5 kw.. 2.5 kw qrp slugs.
It's Not on their website.. nor catalog... but has been around for
years. I'll dig up the model number and post it in a few days.
Fits the Bird 7/8" line sections too !
The 7/8" line sections all have a huge 3/8" inner conductor
tube running down the middle..... where they then neck it down
to the small diam... to take the QC [quick connector's].
They also make 7-16 DIN QC connector's [male or female] for
both the 7/8" + 1 5/8" line sections. You can also get
7/8" EIA flange connector's as QC connector's. Any QC
connector will fit either a 7/8" line section OR a 1 5/8" line
section. The 1 5/8" line section requires an adaptor plate...
in order to accept the QC connectors.
My buddy in Ohio tells me you can also get 50 kw 2-30 mhz
slugs... but didn't say what size line section it was designed
for.
later...... Jim VE7RF
