开云体育

Fellows I have several fuses installed in most of these linear's. Like a fast 750 ma 3agc style grid fuse... located between chassis.. and negative terminal of 0-1 Amp grid meter. Also have a 3 A

The V-drops across the cathode resistors is what helps to equalize the cathode currents in the 4, 811As. However, 4, individual bifilar filament chokes and 4. DC blocker/coupling caps are needed.

I had some problems with the selection, so here is the direct link to rest of the world: http://www.svetlana-tubes.com/svetlana.htm 73 de Thomas fre, 29,.09.2006 kl. 15.34 -0400, skrev Tony King -

Gents A few years back... after consulting with John Lyles about my idea, I decided to try it... it works ! Nothing really new here... but thought I'd pass along this info... since you will never see

I guess i need 8 resistors? but, how about the voltage drop over the resistors? or should the resistors be so small that I don't need to worry about that? Since i have about 75 ohm input impedance, do

Just in case anybody is interested.... RF Parts has a sale on MANY of their tubes.... both triodes... + tetrodes. eg- Svetlana 3CX-3000A7 $695.00 Svetlana 3CX-6000A7 $855.00 [reg $975.00] ! Of course

The actual link is: <http://www.svetlana-tubes.com> 73, Tony W4ZT Frank Goenninger wrote:

Hi Mike and all: Am 29.09.2006 um 20:04 schrieb Mike(W5UC) & Kathy(K5MWH): Wow ! Thanks for the pointer! Using the Mac OS X built-in PDF creator I made a PDF and uploaded it to the files section of

Good Afternoon All: One of the folks on the Topband reflector sent me some info and I was able to retrieve the information. The following is how I did it. Thanks to all who were working on it. There

Duh! -John, N9RF

Am 29.09.2006 um 19:09 schrieb Tony King - W4ZT: ??? How did achieve that? For me the query for the host www.svetlana.com itself does not work (using low level tools like nslookup [name service

### Now at 104 member's..... I'd say vehemently.... that Rich, and anybody else who has ever either.. been booted off 'amps'.... or had their posts trashed... or edited.....or deleted.... has finally

pentalab wrote: <snip> I had this same problem... it insisted that since I was in the USA there was nothing there for me. That was using my favorite browser, Firefox. I opened the dreaded Internet

Kathy&#92;(K5MWH&#92;)" <w5uc@...> wrote: ### I can't get into Svetlana's site either..... have not been able to.... for a couple of yrs at least. I printed out some of their stuff but not what u

Bob -- It would be interesting to compare this with the AMPS total, but that information has been kept secret ever since someone who got booted off of AMPS by the moderator/censor, downloaded the

Passed the 100 total members mark this week. de KR4DA Bob

Good Evening All: I am looking for information about converting the HA-10 Warrior for 160 meters. There is a Svetlana page with the info on it but I am told that we in the US are presently unable to

Silicone rubber is used to insulate HV wiring.

I'm repairing a Bird 5000H element (2-30 MHz 5 KW) and the resistor in the slug appears to be wrong. What is the nominal resistor value for this element? TIA

Does this mean there is no problem with routing the silicone cooling lines out of the HV end of the line? -John, N9RF