开云体育

OK, the 2? (brand new)? x Ameritron ALS-606's only put out barely 300w on 6m (and only 400w on 75m). Ready to tear our hair out. Plan C was the new ALS-1306...which actually does work. Cut to the

A friend's GONSET 201mk3 power tranny is bad. Where is a good rebuilder or similar sized transformer for replacement ? Mucho Thanks !! Don W4DNR

Glad it helped. Let us know how the project goes. 73, Bob W4JFA

Hey Bob. Thank you from my heart for the plan and photos. I'll ask my repair guy to help me with the project. All the best, s52ow de Tilen Big thanks! V V pon., 31. jul. 2023 ob 15:51 je oseba Bob

Shows part of Input board. Bob W4JFA

Tilen, I found this showing the input switch. Not the CW/SSB switch is bypassed to operate in the SSB position only. Bob W4JFA

Tilen, I worked on a friends but cannot find any pictures but I found this web site with nice pictures on it. Hope this helps. Repair and Mods - Mike Harrison (smugmug.com)

Hello! Does anyone has the plan for tuned input mod for Dentron Clipperton L ?. I'm also searching for a meter to replace. all the best, s52ow Tilen

Chuck said Your guess is correct, it’s a 3CPX-15000B7.? I think it would be a decent choice for a quiet amplifier at 2 – 3 KW out with a very low air flow requirement, especially compared to a

The 3CPX-15,000B7? has a 8.32" OD cooler.? ?That's a big tube...and eats up a lotta space on the chassis, once mating chimney is installed. It would be an easy / easier? tube to cool.

Yes, sorry forgot to mention the tube type. Your guess is correct, it’s a 3CPX-15000B7. I think it would be a decent choice for a quiet amplifier at 2 – 3 KW out with a very low air flow

The problem with that 4CX-15,000A7 is.... damned thing idles at 1 amp.? Scott already has a commercial amp using that tube.? Originally it came with a 4x10...idles at 500 ma.? ?I woulda left it

What tube is this ?? ?It looks like a 3CPX-15,000B7.? ? The YC-156 / YC-172 is the same tube as the 3CPX-15,000B7..... but has the smaller 4.94" OD cooler.....and they were used for MRI use.

Here you go, how about this tube? I have a couple of these left over from a commercial project and I’ll let them go for $1500 each with chimneys and the original Eimac boxes. It’s a bolt to the

BTW, these are all NEW tubes with just a few hours to check them out. Sent: Wednesday, July 26, 2023 11:13 PM To: '[email protected]' Subject: RE: [ham-amplifiers] Update on 10kw 3CX-6000A7 6

Great web site Jim! I wanna water cooled amp! Bob W4JFA

I do love tubes with handles…!!

Antennas by Eimac! Mod-U-Lator, Mike(y)/W3SLK Sent: Wednesday, July 26, 2023 7:17 PM To: [email protected] Subject: Re: [ham-amplifiers] Update on 10kw 3CX-6000A7 6 Meter Ham Linear Amplifier

.

Who cares ?? 1.5 kw into stacked HF yagi's on? a 200' tower is..."ok"? but 5kw into a dipole up 50'? is a "no-no".? ? Gimme a break.? Who cares how anybody obtains their ERP. Anything goes on