开云体育

See Below, offering out other CB I've not had the chance to read that one. What was it about? the

Sometimes, a 3-0 service has a monthly minimum charge that will blow the hat clean off of one's head.

Being that my Bridgeport mill is 1.5 HP, I use a rotary convertor to change the 220X1 to 220X3... Not perfect but it works... I did consider asking Consumers Power Co. to give me a price for 3 phase

Yeah, that's what I am doing... We quickly metered the remaining four... They are good, but two had drifted out of the 5% range a small amount and two were still in range... Each one is dissipating

He is one of our "recognized amplifier experts". - Tom Rauch, W8JI, Nov. 1994 *QST* magazine And he has not yet taken a class in alternating-current circuit analysis.

Mike, The kicker is, this un-named moderator said "You have been given a wide degree of latitude - wider than many others". For what, offering technical advice to any who asked for it? They also said

A 3 phase service is mighty fine to have if one can afford to have it put in. I've not checked on the price in a while, but back in 1985, a 200 amp 220 volt service ran around $2000 from the power

Could well be. chortle. The laugher is that the "Administrator" / censor who jackboots folks out of AMPS for not giving a callsign, does not give a callsign himself. If Tom joins this discussion

Some of those with good technical knowledge are Tom's pals. My take on Tom is that he attracts people who share a common element in their childhoods. Apparently, the attraction is so strong that a

Will, et al, I challenged the 'administrator' about what calls for being banned from the list. Included were email lists and having a 'lack' of a call sign. Neither one, I pointed out were part of the

I know of several that tried and the post never made it. Two did, but the rest went bye bye. The unnamed, "no-callsign either" moderator, who was on me about showing a callsign, has his eye on every

reputation for opening up - even when operated well within the mfg's max-V rating. ### depends how they are mounted and or supported. The newer 5% tol units made by Ohmite, IRC, clarostat, dale etc...

Om SSB, it's about a third of that. My receiver has a tunable IF, so i could hear through the zero beat He did not have noticeable ripple with voice modulastion.

There will be no improvement as long transmitting bandwith is limited or with poor audio response. In Germany we are limited to 2,7KHz bandwith anyway, except on 10m. 73 Peter

heat wave in Southern California, transformers were popping like popcorn in residential areas because Southern California Edison originally cut costs by installing transformers that were Way too

To achieve 1,5% ripple from a 6-pulse power supply of 5KV at 3A you will need a capacitor of 0,32?F. Without any cap ripple will be 4%. You will not here any hum from a transmitter without capacitor

I wonder if 'Z' is the c.s. administrator of the old amps group on contesting.com? Har, he really shot himself in the foot. He's now the administrator of a defunct group. He might as well retire, he

could ### The ripple with say 2 uf and 6 kv @ 800 ma should have been VERY noticeable........ unless of course your xcvr chops off all the audio below 300 hz. You can hear 120 hz ripple plane as day